[PATCH] drm/bridge: adv7533: Reset DSI receiver logic

[Dmitry Baryshkov]

On Wed, Nov 13, 2024 at 08:40:15AM +0100, Stefan Ekenberg wrote:
> Reset DSI receiver logic during power on. The need for this change was
> discovered when investigating issue with ADV7535. The symptom of the
> problem was that ADV7535 continuously outputs a black image. This
> happened for about 10% of the times that ADV7535 was powered on. The
> rest of the times the image was as expected.
> 
> The solution in this patch (placement of reset and sleep time of 200ms)
> is implemented as outlined by the Analog Devices support team.

Is this reset sequence specific only to adv7535? Is it applicable to
adv7533? adv7511?

> 
> Signed-off-by: Stefan Ekenberg <stefan.ekenberg at axis.com>
> ---
>  drivers/gpu/drm/bridge/adv7511/adv7533.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c
> index 4481489aaf5ebf164313c86cbf3447d2d7914ab9..93085c2b872ed98f4ee394236dc66c568c0e5ccf 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
> @@ -67,6 +67,15 @@ void adv7533_dsi_power_on(struct adv7511 *adv)
>  {
>  	struct mipi_dsi_device *dsi = adv->dsi;
>  
> +	/*
> +	 * Reset DSI receiver block logic to avoid ADV7535 startup problem.
> +	 * Without this reset it sometimes continuously fails to receive
> +	 * incoming DSI packets and outputs black image.
> +	 */
> +	regmap_write(adv->regmap_cec, 0x26, 0x18);
> +	msleep(200);
> +	regmap_write(adv->regmap_cec, 0x26, 0x38);
> +
>  	if (adv->use_timing_gen)
>  		adv7511_dsi_config_timing_gen(adv);
>  
> 
> ---
> base-commit: 59b723cd2adbac2a34fc8e12c74ae26ae45bf230
> change-id: 20241108-adv7533-dsi-reset-488c6fbb5e42
> 
> Best regards,
> -- 
> Stefan Ekenberg <stefan.ekenberg at axis.com>
> 

-- 
With best wishes
Dmitry