[PATCH] drm/bridge: adv7533: Reset DSI receiver logic

Stefan Ekenberg stefan.ekenberg at axis.com
Fri Nov 15 09:01:32 UTC 2024


On 11/15/24 09:10, Dmitry Baryshkov wrote:
> On Wed, Nov 13, 2024 at 08:40:15AM +0100, Stefan Ekenberg wrote:
>> Reset DSI receiver logic during power on. The need for this change was
>> discovered when investigating issue with ADV7535. The symptom of the
>> problem was that ADV7535 continuously outputs a black image. This
>> happened for about 10% of the times that ADV7535 was powered on. The
>> rest of the times the image was as expected.
>>
>> The solution in this patch (placement of reset and sleep time of 200ms)
>> is implemented as outlined by the Analog Devices support team.
> 
> Is this reset sequence specific only to adv7535? Is it applicable to
> adv7533? adv7511?

I know that it is not applicable for ADV7511 (that chip doesn't have any 
MIPI DSI receiver). It might be applicable for ADV7533 but unfortunately 
I don't know. I have only used AD7535 and therefore never tested 
anything on ADV7533.

> 
>>
>> Signed-off-by: Stefan Ekenberg <stefan.ekenberg at axis.com>
>> ---
>>   drivers/gpu/drm/bridge/adv7511/adv7533.c | 9 +++++++++
>>   1 file changed, 9 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c
>> index 4481489aaf5ebf164313c86cbf3447d2d7914ab9..93085c2b872ed98f4ee394236dc66c568c0e5ccf 100644
>> --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c
>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
>> @@ -67,6 +67,15 @@ void adv7533_dsi_power_on(struct adv7511 *adv)
>>   {
>>   	struct mipi_dsi_device *dsi = adv->dsi;
>>   
>> +	/*
>> +	 * Reset DSI receiver block logic to avoid ADV7535 startup problem.
>> +	 * Without this reset it sometimes continuously fails to receive
>> +	 * incoming DSI packets and outputs black image.
>> +	 */
>> +	regmap_write(adv->regmap_cec, 0x26, 0x18);
>> +	msleep(200);
>> +	regmap_write(adv->regmap_cec, 0x26, 0x38);
>> +
>>   	if (adv->use_timing_gen)
>>   		adv7511_dsi_config_timing_gen(adv);
>>   
>>
>> ---
>> base-commit: 59b723cd2adbac2a34fc8e12c74ae26ae45bf230
>> change-id: 20241108-adv7533-dsi-reset-488c6fbb5e42
>>
>> Best regards,
>> -- 
>> Stefan Ekenberg <stefan.ekenberg at axis.com>
>>
> 



More information about the dri-devel mailing list