[PATCH 1/3] dt-bindings: drm/bridge: ti-sn65dsi83: Add optional property ti,lvds-vcom

[Rob Herring]

On Wed, Nov 27, 2024 at 11:30:29AM +0100, Andrej Picej wrote:
> From: Janine Hagemann <j.hagemann at phytec.de>
> 
> Add an optional property to change LVDS output voltage. This depends on
> the connected display specifications. With this property we directly set
> the LVDS_VCOM (0x19) register.
> Better register property mapping would be quite tricky. Please check
> bridge's datasheet for details on how register values set the LVDS
> data lines and LVDS clock output voltage.
> 
> Signed-off-by: Janine Hagemann <j.hagemann at phytec.de>
> Signed-off-by: Andrej Picej <andrej.picej at norik.com>
> ---
>  .../bindings/display/bridge/ti,sn65dsi83.yaml      | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
> index 48a97bb3e2e0..5b2c0c281824 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
> @@ -58,6 +58,12 @@ properties:
>                    - const: 2
>                    - const: 3
>                    - const: 4
> +              ti,lvds-vcom:
> +                $ref: /schemas/types.yaml#/definitions/uint32
> +                description: LVDS output voltage configuration. This defines
> +                  LVDS_VCOM (0x19) register value. Check bridge's datasheet for
> +                  details on how register values set the LVDS data lines and
> +                  LVDS clock output voltage.

Constraints? 0 - 2^32 are all valid values?

>  
>        port at 1:
>          $ref: /schemas/graph.yaml#/$defs/port-base
> @@ -78,6 +84,12 @@ properties:
>                    - const: 2
>                    - const: 3
>                    - const: 4
> +              ti,lvds-vcom:
> +                $ref: /schemas/types.yaml#/definitions/uint32
> +                description: LVDS output voltage configuration. This defines
> +                  LVDS_VCOM (0x19) register value. Check bridge's datasheet for
> +                  details on how register values set the LVDS data lines and
> +                  LVDS clock output voltage.

Never good to just have 2 copies of the same thing. Move the whole port 
schema to a $defs entry and add the property there. Then just $ref it:

  port at 0:
    description: Video port for MIPI DSI Channel-A input
    $ref: '#/$defs/dsi-port'


$defs:
  dsi-port:
    $ref: /schemas/graph.yaml#/$defs/port-base
    unevaluatedProperties: false
    description: Video port for MIPI DSI inputs

    properties:
      endpoint:
        $ref: /schemas/media/video-interfaces.yaml#
        unevaluatedProperties: false

        properties:
          data-lanes:
            description: array of physical DSI data lane indexes.
            minItems: 1
            items:
              - const: 1
              - const: 2
              - const: 3
              - const: 4