[PATCH 3/5] arm64: dts: imx8mp-msc-sm2s-ep1: Add HDMI connector

[Liu Ying]

Add a HDMI connector to connect with i.MX8MP HDMI TX output.
This is a preparation for making the i.MX8MP LCDIF driver use
drm_bridge_connector which requires the DRM_BRIDGE_ATTACH_NO_CONNECTOR
flag.  With that flag, the DW HDMI bridge core driver would
try to attach the next bridge which is the HDMI connector.

Signed-off-by: Liu Ying <victor.liu at nxp.com>
---
 .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index 83194ea7cb81..b776646a258a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -15,6 +15,17 @@ / {
 		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
 		     "fsl,imx8mp";
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	reg_vcc_3v3_audio: 3v3-audio-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3_AUD";
@@ -54,6 +65,14 @@ &hdmi_tx {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hdmi>;
 	status = "okay";
+
+	ports {
+		port at 1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+	};
 };
 
 &hdmi_tx_phy {
-- 
2.34.1