[PATCH 3/5] arm64: dts: imx8mp-msc-sm2s-ep1: Add HDMI connector

[Alexander Stein]

Am Freitag, 18. Oktober 2024, 08:48:11 CEST schrieb Liu Ying:
> Add a HDMI connector to connect with i.MX8MP HDMI TX output.
> This is a preparation for making the i.MX8MP LCDIF driver use
> drm_bridge_connector which requires the DRM_BRIDGE_ATTACH_NO_CONNECTOR
> flag.  With that flag, the DW HDMI bridge core driver would
> try to attach the next bridge which is the HDMI connector.
> 
> Signed-off-by: Liu Ying <victor.liu at nxp.com>

Looks similar to imx8mp-tqma8mpql-mba8mpxl.dts, so:
Reviewed-by: Alexander Stein <alexander.stein at ew.tq-group.com>

> ---
>  .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> index 83194ea7cb81..b776646a258a 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> @@ -15,6 +15,17 @@ / {
>  		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
>  		     "fsl,imx8mp";
>  
> +	hdmi-connector {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_in: endpoint {
> +				remote-endpoint = <&hdmi_tx_out>;
> +			};
> +		};
> +	};
> +
>  	reg_vcc_3v3_audio: 3v3-audio-regulator {
>  		compatible = "regulator-fixed";
>  		regulator-name = "VCC_3V3_AUD";
> @@ -54,6 +65,14 @@ &hdmi_tx {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_hdmi>;
>  	status = "okay";
> +
> +	ports {
> +		port at 1 {
> +			hdmi_tx_out: endpoint {
> +				remote-endpoint = <&hdmi_in>;
> +			};
> +		};
> +	};
>  };
>  
>  &hdmi_tx_phy {
> 


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/