[PATCH v6 1/5] drm/panthor: introduce job cycle and timestamp accounting
Adrián Larumbe
adrian.larumbe at collabora.com
Fri Sep 27 14:53:10 UTC 2024
On 25.09.2024 10:56, Steven Price wrote:
>On 23/09/2024 21:43, Adrián Larumbe wrote:
>> Hi Steve,
>>
>> On 23.09.2024 09:55, Steven Price wrote:
>>> On 20/09/2024 23:36, Adrián Larumbe wrote:
>>>> Hi Steve, thanks for the review.
>>>
>>> Hi Adrián,
>>>
>>>> I've applied all of your suggestions for the next patch series revision, so I'll
>>>> only be answering to your question about the calc_profiling_ringbuf_num_slots
>>>> function further down below.
>>>>
>>>
>>> [...]
>>>
>>>>>> @@ -3003,6 +3190,34 @@ static const struct drm_sched_backend_ops panthor_queue_sched_ops = {
>>>>>> .free_job = queue_free_job,
>>>>>> };
>>>>>>
>>>>>> +static u32 calc_profiling_ringbuf_num_slots(struct panthor_device *ptdev,
>>>>>> + u32 cs_ringbuf_size)
>>>>>> +{
>>>>>> + u32 min_profiled_job_instrs = U32_MAX;
>>>>>> + u32 last_flag = fls(PANTHOR_DEVICE_PROFILING_ALL);
>>>>>> +
>>>>>> + /*
>>>>>> + * We want to calculate the minimum size of a profiled job's CS,
>>>>>> + * because since they need additional instructions for the sampling
>>>>>> + * of performance metrics, they might take up further slots in
>>>>>> + * the queue's ringbuffer. This means we might not need as many job
>>>>>> + * slots for keeping track of their profiling information. What we
>>>>>> + * need is the maximum number of slots we should allocate to this end,
>>>>>> + * which matches the maximum number of profiled jobs we can place
>>>>>> + * simultaneously in the queue's ring buffer.
>>>>>> + * That has to be calculated separately for every single job profiling
>>>>>> + * flag, but not in the case job profiling is disabled, since unprofiled
>>>>>> + * jobs don't need to keep track of this at all.
>>>>>> + */
>>>>>> + for (u32 i = 0; i < last_flag; i++) {
>>>>>> + if (BIT(i) & PANTHOR_DEVICE_PROFILING_ALL)
>>>>>> + min_profiled_job_instrs =
>>>>>> + min(min_profiled_job_instrs, calc_job_credits(BIT(i)));
>>>>>> + }
>>>>>> +
>>>>>> + return DIV_ROUND_UP(cs_ringbuf_size, min_profiled_job_instrs * sizeof(u64));
>>>>>> +}
>>>>>
>>>>> I may be missing something, but is there a situation where this is
>>>>> different to calc_job_credits(0)? AFAICT the infrastructure you've added
>>>>> can only add extra instructions to the no-flags case - whereas this
>>>>> implies you're thinking that instructions may also be removed (or replaced).
>>>>>
>>>>> Steve
>>>>
>>>> Since we create a separate kernel BO to hold the profiling information slot, we
>>>> need one that would be able to accomodate as many slots as the maximum number of
>>>> profiled jobs we can insert simultaneously into the queue's ring buffer. Because
>>>> profiled jobs always take more instructions than unprofiled ones, then we would
>>>> usually need fewer slots than the number of unprofiled jobs we could insert at
>>>> once in the ring buffer.
>>>>
>>>> Because we represent profiling metrics with a bit mask, then we need to test the
>>>> size of the CS for every single metric enabled in isolation, since enabling more
>>>> than one will always mean a bigger CS, and therefore fewer jobs tracked at once
>>>> in the queue's ring buffer.
>>>>
>>>> In our case, calling calc_job_credits(0) would simply tell us the number of
>>>> instructions we need for a normal job with no profiled features enabled, which
>>>> would always requiere less instructions than profiled ones, and therefore more
>>>> slots in the profiling info kernel BO. But we don't need to keep track of
>>>> profiling numbers for unprofiled jobs, so there's no point in calculating this
>>>> number.
>>>>
>>>> At first I was simply allocating a profiling info kernel BO as big as the number
>>>> of simultaneous unprofiled job slots in the ring queue, but Boris pointed out
>>>> that since queue ringbuffers can be as big as 2GiB, a lot of this memory would
>>>> be wasted, since profiled jobs always require more slots because they hold more
>>>> instructions, so fewer profiling slots in said kernel BO.
>>>>
>>>> The value of this approach will eventually manifest if we decided to keep track of
>>>> more profiling metrics, since this code won't have to change at all, other than
>>>> adding new profiling flags in the panthor_device_profiling_flags enum.
>>>
>>> Thanks for the detailed explanation. I think what I was missing is that
>>> the loop is checking each bit flag independently and *not* checking
>>> calc_job_credits(0).
>>>
>>> The check for (BIT(i) & PANTHOR_DEVICE_PROFILING_ALL) is probably what
>>> confused me - that should be completely redundant. Or at least we need
>>> something more intelligent if we have profiling bits which are not
>>> mutually compatible.
>>
>> I thought of an alternative that would only test bits that are actually part of
>> the mask:
>>
>> static u32 calc_profiling_ringbuf_num_slots(struct panthor_device *ptdev,
>> u32 cs_ringbuf_size)
>> {
>> u32 min_profiled_job_instrs = U32_MAX;
>> u32 profiling_mask = PANTHOR_DEVICE_PROFILING_ALL;
>>
>> while (profiling_mask) {
>> u32 i = ffs(profiling_mask) - 1;
>> profiling_mask &= ~BIT(i);
>> min_profiled_job_instrs =
>> min(min_profiled_job_instrs, calc_job_credits(BIT(i)));
>> }
>>
>> return DIV_ROUND_UP(cs_ringbuf_size, min_profiled_job_instrs * sizeof(u64));
>> }
>>
>> However, I don't think this would be more efficient, because ffs() is probably
>> fetching the first set bit by performing register shifts, and I guess this would
>> take somewhat longer than iterating over every single bit from the last one,
>> even if also matching them against the whole mask, just in case in future
>> additions of performance metrics we decide to leave some of the lower
>> significance bits untouched.
>
>Efficiency isn't very important here - we're not on a fast path, so it's
>more about ensuring the code is readable. I don't think the above is
>more readable then the original for loop.
>
>> Regarding your question about mutual compatibility, I don't think that is an
>> issue here, because we're testing bits in isolation. If in the future we find
>> out that some of the values we're profiling cannot be sampled at once, we can
>> add that logic to the sysfs knob handler, to make sure UM cannot set forbidden
>> profiling masks.
>
>My comment about compatibility is because in the original above you were
>calculating the top bit of PANTHOR_DEVICE_PROFILING_ALL:
>
>> u32 last_flag = fls(PANTHOR_DEVICE_PROFILING_ALL);
>
>then looping between 0 and that bit:
>
>> for (u32 i = 0; i < last_flag; i++) {
>
>So the test:
>
>> if (BIT(i) & PANTHOR_DEVICE_PROFILING_ALL)
>
>would only fail if PANTHOR_DEVICE_PROFILING_ALL had gaps in the bits
>that it set. The only reason I can think for that to be true in the
>future is if there is some sort of incompatibility - e.g. maybe there's
>an old and new way of doing some form of profiling with the old way
>being kept for backwards compatibility. But I suspect if/when that is
>required we'll need to revisit this function anyway. So that 'if'
>statement seems completely redundant (it's trivially always true).
I think you're right about this. Would you be fine with the rest of the patch
as it is in revision 8 if I also deleted this bitmask check?
>Steve
>
>>> I'm also not entirely sure that the amount of RAM saved is significant,
>>> but you've already written the code so we might as well have the saving ;)
>>
>> I think this was more evident before Boris suggested we reduce the basic slot
>> size to that of a single cache line, because then the minimum profiled job
>> might've taken twice as many ringbuffer slots as a nonprofiled one. In that
>> case, we would need a half as big BO for holding the sampled data (in case the
>> least size profiled job CS would extend over the 16 instruction boundary).
>> I still think this is a good idea so that in the future we don't need to worry
>> about adjusting the code that deals with preparing the right boilerplate CS,
>> since it'll only be a matter of adding new instructions inside prepare_job_instrs().
>>
>>> Thanks,
>>> Steve
>>>
>>>> Regards,
>>>> Adrian
>>>>
>>>>>> +
>>>>>> static struct panthor_queue *
>>>>>> group_create_queue(struct panthor_group *group,
>>>>>> const struct drm_panthor_queue_create *args)
>>>>>> @@ -3056,9 +3271,35 @@ group_create_queue(struct panthor_group *group,
>>>>>> goto err_free_queue;
>>>>>> }
>>>>>>
>>>>>> + queue->profiling.slot_count =
>>>>>> + calc_profiling_ringbuf_num_slots(group->ptdev, args->ringbuf_size);
>>>>>> +
>>>>>> + queue->profiling.slots =
>>>>>> + panthor_kernel_bo_create(group->ptdev, group->vm,
>>>>>> + queue->profiling.slot_count *
>>>>>> + sizeof(struct panthor_job_profiling_data),
>>>>>> + DRM_PANTHOR_BO_NO_MMAP,
>>>>>> + DRM_PANTHOR_VM_BIND_OP_MAP_NOEXEC |
>>>>>> + DRM_PANTHOR_VM_BIND_OP_MAP_UNCACHED,
>>>>>> + PANTHOR_VM_KERNEL_AUTO_VA);
>>>>>> +
>>>>>> + if (IS_ERR(queue->profiling.slots)) {
>>>>>> + ret = PTR_ERR(queue->profiling.slots);
>>>>>> + goto err_free_queue;
>>>>>> + }
>>>>>> +
>>>>>> + ret = panthor_kernel_bo_vmap(queue->profiling.slots);
>>>>>> + if (ret)
>>>>>> + goto err_free_queue;
>>>>>> +
>>>>>> + /*
>>>>>> + * Credit limit argument tells us the total number of instructions
>>>>>> + * across all CS slots in the ringbuffer, with some jobs requiring
>>>>>> + * twice as many as others, depending on their profiling status.
>>>>>> + */
>>>>>> ret = drm_sched_init(&queue->scheduler, &panthor_queue_sched_ops,
>>>>>> group->ptdev->scheduler->wq, 1,
>>>>>> - args->ringbuf_size / (NUM_INSTRS_PER_SLOT * sizeof(u64)),
>>>>>> + args->ringbuf_size / sizeof(u64),
>>>>>> 0, msecs_to_jiffies(JOB_TIMEOUT_MS),
>>>>>> group->ptdev->reset.wq,
>>>>>> NULL, "panthor-queue", group->ptdev->base.dev);
>>>>>> @@ -3354,6 +3595,7 @@ panthor_job_create(struct panthor_file *pfile,
>>>>>> {
>>>>>> struct panthor_group_pool *gpool = pfile->groups;
>>>>>> struct panthor_job *job;
>>>>>> + u32 credits;
>>>>>> int ret;
>>>>>>
>>>>>> if (qsubmit->pad)
>>>>>> @@ -3407,9 +3649,16 @@ panthor_job_create(struct panthor_file *pfile,
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> + job->profiling.mask = pfile->ptdev->profile_mask;
>>>>>> + credits = calc_job_credits(job->profiling.mask);
>>>>>> + if (credits == 0) {
>>>>>> + ret = -EINVAL;
>>>>>> + goto err_put_job;
>>>>>> + }
>>>>>> +
>>>>>> ret = drm_sched_job_init(&job->base,
>>>>>> &job->group->queues[job->queue_idx]->entity,
>>>>>> - 1, job->group);
>>>>>> + credits, job->group);
>>>>>> if (ret)
>>>>>> goto err_put_job;
>>>>>>
>>>>
More information about the dri-devel
mailing list