[PATCH v6 1/5] drm/panthor: introduce job cycle and timestamp accounting
Steven Price
steven.price at arm.com
Mon Sep 30 11:28:26 UTC 2024
On 27/09/2024 15:53, Adrián Larumbe wrote:
> On 25.09.2024 10:56, Steven Price wrote:
>> On 23/09/2024 21:43, Adrián Larumbe wrote:
>>> Hi Steve,
>>>
>>> On 23.09.2024 09:55, Steven Price wrote:
>>>> On 20/09/2024 23:36, Adrián Larumbe wrote:
>>>>> Hi Steve, thanks for the review.
>>>>
>>>> Hi Adrián,
>>>>
>>>>> I've applied all of your suggestions for the next patch series revision, so I'll
>>>>> only be answering to your question about the calc_profiling_ringbuf_num_slots
>>>>> function further down below.
>>>>>
>>>>
>>>> [...]
>>>>
>>>>>>> @@ -3003,6 +3190,34 @@ static const struct drm_sched_backend_ops panthor_queue_sched_ops = {
>>>>>>> .free_job = queue_free_job,
>>>>>>> };
>>>>>>>
>>>>>>> +static u32 calc_profiling_ringbuf_num_slots(struct panthor_device *ptdev,
>>>>>>> + u32 cs_ringbuf_size)
>>>>>>> +{
>>>>>>> + u32 min_profiled_job_instrs = U32_MAX;
>>>>>>> + u32 last_flag = fls(PANTHOR_DEVICE_PROFILING_ALL);
>>>>>>> +
>>>>>>> + /*
>>>>>>> + * We want to calculate the minimum size of a profiled job's CS,
>>>>>>> + * because since they need additional instructions for the sampling
>>>>>>> + * of performance metrics, they might take up further slots in
>>>>>>> + * the queue's ringbuffer. This means we might not need as many job
>>>>>>> + * slots for keeping track of their profiling information. What we
>>>>>>> + * need is the maximum number of slots we should allocate to this end,
>>>>>>> + * which matches the maximum number of profiled jobs we can place
>>>>>>> + * simultaneously in the queue's ring buffer.
>>>>>>> + * That has to be calculated separately for every single job profiling
>>>>>>> + * flag, but not in the case job profiling is disabled, since unprofiled
>>>>>>> + * jobs don't need to keep track of this at all.
>>>>>>> + */
>>>>>>> + for (u32 i = 0; i < last_flag; i++) {
>>>>>>> + if (BIT(i) & PANTHOR_DEVICE_PROFILING_ALL)
>>>>>>> + min_profiled_job_instrs =
>>>>>>> + min(min_profiled_job_instrs, calc_job_credits(BIT(i)));
>>>>>>> + }
>>>>>>> +
>>>>>>> + return DIV_ROUND_UP(cs_ringbuf_size, min_profiled_job_instrs * sizeof(u64));
>>>>>>> +}
>>>>>>
>>>>>> I may be missing something, but is there a situation where this is
>>>>>> different to calc_job_credits(0)? AFAICT the infrastructure you've added
>>>>>> can only add extra instructions to the no-flags case - whereas this
>>>>>> implies you're thinking that instructions may also be removed (or replaced).
>>>>>>
>>>>>> Steve
>>>>>
>>>>> Since we create a separate kernel BO to hold the profiling information slot, we
>>>>> need one that would be able to accomodate as many slots as the maximum number of
>>>>> profiled jobs we can insert simultaneously into the queue's ring buffer. Because
>>>>> profiled jobs always take more instructions than unprofiled ones, then we would
>>>>> usually need fewer slots than the number of unprofiled jobs we could insert at
>>>>> once in the ring buffer.
>>>>>
>>>>> Because we represent profiling metrics with a bit mask, then we need to test the
>>>>> size of the CS for every single metric enabled in isolation, since enabling more
>>>>> than one will always mean a bigger CS, and therefore fewer jobs tracked at once
>>>>> in the queue's ring buffer.
>>>>>
>>>>> In our case, calling calc_job_credits(0) would simply tell us the number of
>>>>> instructions we need for a normal job with no profiled features enabled, which
>>>>> would always requiere less instructions than profiled ones, and therefore more
>>>>> slots in the profiling info kernel BO. But we don't need to keep track of
>>>>> profiling numbers for unprofiled jobs, so there's no point in calculating this
>>>>> number.
>>>>>
>>>>> At first I was simply allocating a profiling info kernel BO as big as the number
>>>>> of simultaneous unprofiled job slots in the ring queue, but Boris pointed out
>>>>> that since queue ringbuffers can be as big as 2GiB, a lot of this memory would
>>>>> be wasted, since profiled jobs always require more slots because they hold more
>>>>> instructions, so fewer profiling slots in said kernel BO.
>>>>>
>>>>> The value of this approach will eventually manifest if we decided to keep track of
>>>>> more profiling metrics, since this code won't have to change at all, other than
>>>>> adding new profiling flags in the panthor_device_profiling_flags enum.
>>>>
>>>> Thanks for the detailed explanation. I think what I was missing is that
>>>> the loop is checking each bit flag independently and *not* checking
>>>> calc_job_credits(0).
>>>>
>>>> The check for (BIT(i) & PANTHOR_DEVICE_PROFILING_ALL) is probably what
>>>> confused me - that should be completely redundant. Or at least we need
>>>> something more intelligent if we have profiling bits which are not
>>>> mutually compatible.
>>>
>>> I thought of an alternative that would only test bits that are actually part of
>>> the mask:
>>>
>>> static u32 calc_profiling_ringbuf_num_slots(struct panthor_device *ptdev,
>>> u32 cs_ringbuf_size)
>>> {
>>> u32 min_profiled_job_instrs = U32_MAX;
>>> u32 profiling_mask = PANTHOR_DEVICE_PROFILING_ALL;
>>>
>>> while (profiling_mask) {
>>> u32 i = ffs(profiling_mask) - 1;
>>> profiling_mask &= ~BIT(i);
>>> min_profiled_job_instrs =
>>> min(min_profiled_job_instrs, calc_job_credits(BIT(i)));
>>> }
>>>
>>> return DIV_ROUND_UP(cs_ringbuf_size, min_profiled_job_instrs * sizeof(u64));
>>> }
>>>
>>> However, I don't think this would be more efficient, because ffs() is probably
>>> fetching the first set bit by performing register shifts, and I guess this would
>>> take somewhat longer than iterating over every single bit from the last one,
>>> even if also matching them against the whole mask, just in case in future
>>> additions of performance metrics we decide to leave some of the lower
>>> significance bits untouched.
>>
>> Efficiency isn't very important here - we're not on a fast path, so it's
>> more about ensuring the code is readable. I don't think the above is
>> more readable then the original for loop.
>>
>>> Regarding your question about mutual compatibility, I don't think that is an
>>> issue here, because we're testing bits in isolation. If in the future we find
>>> out that some of the values we're profiling cannot be sampled at once, we can
>>> add that logic to the sysfs knob handler, to make sure UM cannot set forbidden
>>> profiling masks.
>>
>> My comment about compatibility is because in the original above you were
>> calculating the top bit of PANTHOR_DEVICE_PROFILING_ALL:
>>
>>> u32 last_flag = fls(PANTHOR_DEVICE_PROFILING_ALL);
>>
>> then looping between 0 and that bit:
>>
>>> for (u32 i = 0; i < last_flag; i++) {
>>
>> So the test:
>>
>>> if (BIT(i) & PANTHOR_DEVICE_PROFILING_ALL)
>>
>> would only fail if PANTHOR_DEVICE_PROFILING_ALL had gaps in the bits
>> that it set. The only reason I can think for that to be true in the
>> future is if there is some sort of incompatibility - e.g. maybe there's
>> an old and new way of doing some form of profiling with the old way
>> being kept for backwards compatibility. But I suspect if/when that is
>> required we'll need to revisit this function anyway. So that 'if'
>> statement seems completely redundant (it's trivially always true).
>
> I think you're right about this. Would you be fine with the rest of the patch
> as it is in revision 8 if I also deleted this bitmask check?
Yes the rest of it looks fine.
Thanks,
Steve
>> Steve
>>
>>>> I'm also not entirely sure that the amount of RAM saved is significant,
>>>> but you've already written the code so we might as well have the saving ;)
>>>
>>> I think this was more evident before Boris suggested we reduce the basic slot
>>> size to that of a single cache line, because then the minimum profiled job
>>> might've taken twice as many ringbuffer slots as a nonprofiled one. In that
>>> case, we would need a half as big BO for holding the sampled data (in case the
>>> least size profiled job CS would extend over the 16 instruction boundary).
>>> I still think this is a good idea so that in the future we don't need to worry
>>> about adjusting the code that deals with preparing the right boilerplate CS,
>>> since it'll only be a matter of adding new instructions inside prepare_job_instrs().
>>>
>>>> Thanks,
>>>> Steve
>>>>
>>>>> Regards,
>>>>> Adrian
>>>>>
>>>>>>> +
>>>>>>> static struct panthor_queue *
>>>>>>> group_create_queue(struct panthor_group *group,
>>>>>>> const struct drm_panthor_queue_create *args)
>>>>>>> @@ -3056,9 +3271,35 @@ group_create_queue(struct panthor_group *group,
>>>>>>> goto err_free_queue;
>>>>>>> }
>>>>>>>
>>>>>>> + queue->profiling.slot_count =
>>>>>>> + calc_profiling_ringbuf_num_slots(group->ptdev, args->ringbuf_size);
>>>>>>> +
>>>>>>> + queue->profiling.slots =
>>>>>>> + panthor_kernel_bo_create(group->ptdev, group->vm,
>>>>>>> + queue->profiling.slot_count *
>>>>>>> + sizeof(struct panthor_job_profiling_data),
>>>>>>> + DRM_PANTHOR_BO_NO_MMAP,
>>>>>>> + DRM_PANTHOR_VM_BIND_OP_MAP_NOEXEC |
>>>>>>> + DRM_PANTHOR_VM_BIND_OP_MAP_UNCACHED,
>>>>>>> + PANTHOR_VM_KERNEL_AUTO_VA);
>>>>>>> +
>>>>>>> + if (IS_ERR(queue->profiling.slots)) {
>>>>>>> + ret = PTR_ERR(queue->profiling.slots);
>>>>>>> + goto err_free_queue;
>>>>>>> + }
>>>>>>> +
>>>>>>> + ret = panthor_kernel_bo_vmap(queue->profiling.slots);
>>>>>>> + if (ret)
>>>>>>> + goto err_free_queue;
>>>>>>> +
>>>>>>> + /*
>>>>>>> + * Credit limit argument tells us the total number of instructions
>>>>>>> + * across all CS slots in the ringbuffer, with some jobs requiring
>>>>>>> + * twice as many as others, depending on their profiling status.
>>>>>>> + */
>>>>>>> ret = drm_sched_init(&queue->scheduler, &panthor_queue_sched_ops,
>>>>>>> group->ptdev->scheduler->wq, 1,
>>>>>>> - args->ringbuf_size / (NUM_INSTRS_PER_SLOT * sizeof(u64)),
>>>>>>> + args->ringbuf_size / sizeof(u64),
>>>>>>> 0, msecs_to_jiffies(JOB_TIMEOUT_MS),
>>>>>>> group->ptdev->reset.wq,
>>>>>>> NULL, "panthor-queue", group->ptdev->base.dev);
>>>>>>> @@ -3354,6 +3595,7 @@ panthor_job_create(struct panthor_file *pfile,
>>>>>>> {
>>>>>>> struct panthor_group_pool *gpool = pfile->groups;
>>>>>>> struct panthor_job *job;
>>>>>>> + u32 credits;
>>>>>>> int ret;
>>>>>>>
>>>>>>> if (qsubmit->pad)
>>>>>>> @@ -3407,9 +3649,16 @@ panthor_job_create(struct panthor_file *pfile,
>>>>>>> }
>>>>>>> }
>>>>>>>
>>>>>>> + job->profiling.mask = pfile->ptdev->profile_mask;
>>>>>>> + credits = calc_job_credits(job->profiling.mask);
>>>>>>> + if (credits == 0) {
>>>>>>> + ret = -EINVAL;
>>>>>>> + goto err_put_job;
>>>>>>> + }
>>>>>>> +
>>>>>>> ret = drm_sched_job_init(&job->base,
>>>>>>> &job->group->queues[job->queue_idx]->entity,
>>>>>>> - 1, job->group);
>>>>>>> + credits, job->group);
>>>>>>> if (ret)
>>>>>>> goto err_put_job;
>>>>>>>
>>>>>
More information about the dri-devel
mailing list