[PATCH v2 2/5] drm: panel-orientation-quirks: Add quirks for AYA NEO Flip DS and KB

[Hans de Goede]

Hi,

Thank you for your patches and sorry for being slow to respond.

On 24-Jan-25 9:46 PM, John Edwards wrote:
> From: Andrew Wyatt <fewtarius at steamfork.org>
> 
> The AYA NEO Flip DS and KB both use a 1080x1920 portrait LCD panel.  The
> Flip DS additionally uses a 640x960 portrait LCD panel as a second display.
> 
> Add DMI matches to correctly rotate these panels.
> 
> Signed-off-by: Andrew Wyatt <fewtarius at steamfork.org>
> Co-developed-by: John Edwards <uejji at uejji.net>
> Signed-off-by: John Edwards <uejji at uejji.net>
> Tested-by: Paco Avelar <pacoavelar at hotmail.com>
> ---
>  drivers/gpu/drm/drm_panel_orientation_quirks.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
> index f9c975338..c5acf2628 100644
> --- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
> +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
> @@ -93,6 +93,12 @@ static const struct drm_dmi_panel_orientation_data onegx1_pro = {
>  	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
>  };
>  
> +static const struct drm_dmi_panel_orientation_data lcd640x960_leftside_up = {
> +	.width = 640,
> +	.height = 960,
> +	.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
> +};
> +
>  static const struct drm_dmi_panel_orientation_data lcd720x1280_rightside_up = {
>  	.width = 720,
>  	.height = 1280,
> @@ -202,6 +208,18 @@ static const struct dmi_system_id orientation_data[] = {
>  		  DMI_MATCH(DMI_PRODUCT_NAME, "AIR"),
>  		},
>  		.driver_data = (void *)&lcd1080x1920_leftside_up,
> +	}, {    /* AYA NEO Flip DS Bottom Screen */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AYANEO"),
> +		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "FLIP DS"),
> +	},

Since this '}' is closing the .matches initializer it should be indented 2 tabs,
note I think we can fix this up while merging things so no need for a v3
(assuming Thomas agrees).

> +		.driver_data = (void *)&lcd640x960_leftside_up,
> +	}, {    /* AYA NEO Flip KB/DS Top Screen */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AYANEO"),
> +		  DMI_MATCH(DMI_PRODUCT_NAME, "FLIP"),
> +	},

Since this '}' is closing the .matches initializer it should be indented 2 tabs

> +		.driver_data = (void *)&lcd1080x1920_leftside_up,
>  	}, {	/* AYA NEO Founder */
>  		.matches = {
>  		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AYA NEO"),

Regards,

Hans