[PATCH v2 3/5] drm: panel-orientation-quirks: Add quirk for AYA NEO Slide

[Hans de Goede]

Hi,

On 24-Jan-25 9:46 PM, John Edwards wrote:
> From: Andrew Wyatt <fewtarius at steamfork.org>
> 
> The AYANEO Slide uses a 1080x1920 portrait LCD panel.  This is the same
> panel used on the AYANEO Air Plus, but the DMI data is too different to
> match both with one entry.
> 
> Add a DMI match to correctly rotate the panel on the AYANEO Slide.
> 
> This also covers the Antec Core HS, which is a rebranded AYANEO Slide with
> the exact same hardware and DMI strings.
> 
> Signed-off-by: Andrew Wyatt <fewtarius at steamfork.org>
> Signed-off-by: John Edwards <uejji at uejji.net>
> Tested-by: John Edwards <uejji at uejji.net>
> ---
>  drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
> index c5acf2628..9e6708cd1 100644
> --- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
> +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
> @@ -244,6 +244,12 @@ static const struct dmi_system_id orientation_data[] = {
>  		  DMI_MATCH(DMI_BOARD_NAME, "KUN"),
>  		},
>  		.driver_data = (void *)&lcd1600x2560_rightside_up,
> +	}, {	/* AYA NEO SLIDE */
> +		 .matches = {
> +		   DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AYANEO"),
> +		   DMI_MATCH(DMI_PRODUCT_NAME, "SLIDE"),
> +	},

Since this '}' is closing the .matches initializer it should be indented 2 tabs

> +		.driver_data = (void *)&lcd1080x1920_leftside_up,
>  	}, {    /* AYN Loki Max */
>  		.matches = {
>  			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ayn"),

Regards,

Hans