[PATCH 6/9] phy: mediatek: phy-mtk-mipi-dsi-mt8183: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney at redhat.com>
---
 drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
index 553725e1269c9d7ad88f89367dfa1cf367aaf1ce..a54d44ef70ab49937d210f04fdf42300e8e5f2de 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
@@ -97,16 +97,18 @@ static void mtk_mipi_tx_pll_disable(struct clk_hw *hw)
 	mtk_phy_clear_bits(base + MIPITX_PLL_PWR, AD_DSI_PLL_SDM_PWR_ON);
 }
 
-static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-				       unsigned long *prate)
+static int mtk_mipi_tx_pll_determine_rate(struct clk_hw *hw,
+					  struct clk_rate_request *req)
 {
-	return clamp_val(rate, 125000000, 1600000000);
+	req->rate = clamp_val(req->rate, 125000000, 1600000000);
+
+	return 0;
 }
 
 static const struct clk_ops mtk_mipi_tx_pll_ops = {
 	.enable = mtk_mipi_tx_pll_enable,
 	.disable = mtk_mipi_tx_pll_disable,
-	.round_rate = mtk_mipi_tx_pll_round_rate,
+	.determine_rate = mtk_mipi_tx_pll_determine_rate,
 	.set_rate = mtk_mipi_tx_pll_set_rate,
 	.recalc_rate = mtk_mipi_tx_pll_recalc_rate,
 };

-- 
2.50.0