[PATCH 7/9] phy: rockchip: phy-rockchip-inno-hdmi: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney at redhat.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 30 ++++++++++++++-------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index 8dcc2bb777b5455d21a10f06c5ad842b2ddbc834..1483907413faa5ce1dc8614db05e6e929410404d 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -749,22 +749,23 @@ unsigned long inno_hdmi_phy_rk3228_clk_recalc_rate(struct clk_hw *hw,
 	return vco;
 }
 
-static long inno_hdmi_phy_rk3228_clk_round_rate(struct clk_hw *hw,
-						unsigned long rate,
-						unsigned long *parent_rate)
+static int inno_hdmi_phy_rk3228_clk_determine_rate(struct clk_hw *hw,
+						   struct clk_rate_request *req)
 {
 	const struct pre_pll_config *cfg = pre_pll_cfg_table;
 
-	rate = (rate / 1000) * 1000;
+	req->rate = (req->rate / 1000) * 1000;
 
 	for (; cfg->pixclock != 0; cfg++)
-		if (cfg->pixclock == rate && !cfg->fracdiv)
+		if (cfg->pixclock == req->rate && !cfg->fracdiv)
 			break;
 
 	if (cfg->pixclock == 0)
 		return -EINVAL;
 
-	return cfg->pixclock;
+	req->rate = cfg->pixclock;
+
+	return 0;
 }
 
 static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw,
@@ -835,7 +836,7 @@ static const struct clk_ops inno_hdmi_phy_rk3228_clk_ops = {
 	.unprepare = inno_hdmi_phy_rk3228_clk_unprepare,
 	.is_prepared = inno_hdmi_phy_rk3228_clk_is_prepared,
 	.recalc_rate = inno_hdmi_phy_rk3228_clk_recalc_rate,
-	.round_rate = inno_hdmi_phy_rk3228_clk_round_rate,
+	.determine_rate = inno_hdmi_phy_rk3228_clk_determine_rate,
 	.set_rate = inno_hdmi_phy_rk3228_clk_set_rate,
 };
 
@@ -906,22 +907,23 @@ unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw,
 	return inno->pixclock;
 }
 
-static long inno_hdmi_phy_rk3328_clk_round_rate(struct clk_hw *hw,
-						unsigned long rate,
-						unsigned long *parent_rate)
+static int inno_hdmi_phy_rk3328_clk_determine_rate(struct clk_hw *hw,
+						   struct clk_rate_request *req)
 {
 	const struct pre_pll_config *cfg = pre_pll_cfg_table;
 
-	rate = (rate / 1000) * 1000;
+	req->rate = (req->rate / 1000) * 1000;
 
 	for (; cfg->pixclock != 0; cfg++)
-		if (cfg->pixclock == rate)
+		if (cfg->pixclock == req->rate)
 			break;
 
 	if (cfg->pixclock == 0)
 		return -EINVAL;
 
-	return cfg->pixclock;
+	req->rate = cfg->pixclock;
+
+	return 0;
 }
 
 static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw,
@@ -989,7 +991,7 @@ static const struct clk_ops inno_hdmi_phy_rk3328_clk_ops = {
 	.unprepare = inno_hdmi_phy_rk3328_clk_unprepare,
 	.is_prepared = inno_hdmi_phy_rk3328_clk_is_prepared,
 	.recalc_rate = inno_hdmi_phy_rk3328_clk_recalc_rate,
-	.round_rate = inno_hdmi_phy_rk3328_clk_round_rate,
+	.determine_rate = inno_hdmi_phy_rk3328_clk_determine_rate,
 	.set_rate = inno_hdmi_phy_rk3328_clk_set_rate,
 };
 

-- 
2.50.0