[PATCH v2 02/13] dt-bindings: media: mediatek: add seninf-core binding

[CK Hu (胡俊光)]

On Mon, 2025-07-07 at 09:31 +0800, shangyao lin wrote:
> From: "shangyao.lin" <shangyao.lin at mediatek.com>
> 
> 1. Add camera isp7x module device document
> 
> ---
> 
> Changes in v2:
>   - Rename binding file to mediatek,mt8188-seninf-core.yaml
>   - Various fixes per review comments
>   - Update maintainers list
> 
> Question for reviewer (CK):
> 
> Hi CK,
> 
> Thank you for your review and suggestions on this patch, especially for providing the reference patch (https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=874617__;!!CTRNKA9wMg0ARbw!lK62bVQ9-iOIdvsqy3Y0MZIGQl5Szp23K-rB_IB5uffV-tfbML9p144Cgt-4xTpgeYQWungRDBzhfuY1fYflBnk$ ) and for mentioning in another patch ([V1,02/10] MEDIA: PLATFORM: MEDIATEK: ADD SENINF CONTROLLER) the suggestion to "Move the phy part to phy/mediatek/ folder. You could refer to phy/mediatek/phy-mtk-mipi-csi-0-5.c".
> 
> After reading your comments and the reference patches, my understanding is that only the seninf-core driver should manage all ports internally, and each port corresponds to a PHY. During probe, the driver will parse each port, obtain the corresponding PHY (e.g., devm_phy_get(dev, "csi0"), devm_phy_get(dev, "csi1"), etc.), and operate the PHY for each port individually during stream on/off or power on/off.
> 
> Could you please confirm if my understanding is correct?
> If you have any additional reference patches or examples, I would greatly appreciate it.

I'm not expert on seninf and I find previous link [1] is invalid now.
I provide [2] here for your reference.
I don't know the relation of port and phy. You may find some hint in that link.

[1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=874617
[2] https://patchwork.kernel.org/project/linux-mediatek/patch/20241121-add-mtk-isp-3-0-support-v7-3-b04dc9610619@baylibre.com/

> 
> Thank you for your guidance!
> 
> Best regards,
> Shangyao
> 
> Signed-off-by: shangyao.lin <shangyao.lin at mediatek.com>
> ---

[snip]

> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/power/mediatek,mt8188-power.h>
> +    #include <dt-bindings/clock/mediatek,mt8188-clk.h>
> +
> +    seninf at 16010000 {
> +      compatible = "mediatek,mt8188-seninf-core";
> +      reg = <0 0x16010000 0 0x8000>;
> +      reg-names = "base";
> +      mtk_csi_phy_ver = "mtk_csi_phy_2_0";

mtk_csi_phy_ver is not necessary. compatible imply this.
So drop this.

Regards,
CK

> +      interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>;
> +      power-domains = <&spm MT8188_POWER_DOMAIN_CSIRX_TOP>,
> +                      <&spm MT8188_POWER_DOMAIN_CAM_VCORE>,
> +                      <&spm MT8188_POWER_DOMAIN_CAM_MAIN>;
> +      clocks = <&camsys CLK_CAM_MAIN_SENINF>,
> +               <&topckgen CLK_TOP_SENINF>,
> +               <&topckgen CLK_TOP_SENINF1>,
> +               <&topckgen CLK_TOP_CAMTM>;
> +      clock-names = "clk_cam_seninf",
> +                    "clk_top_seninf",
> +                    "clk_top_seninf1",
> +                    "clk_top_camtm";
> +    };
> +
> +...
> \ No newline at end of file

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20250715/30d360ed/attachment-0001.htm>