[PATCH 3/4] arm64: dts: ti: k3-am62-main: Add tidss clk-ctrl property

[Louis Chauvet]

For am62 processors, we need to use the newly created clk-ctrl property to
properly handle data edge sampling configuration. Add them in the main
device tree.

Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Signed-off-by: Louis Chauvet <louis.chauvet at bootlin.com>
---

Cc: stable at vger.kernel.org
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 9e0b6eee9ac77d66869915b2d7bec3e2275c03ea..d3131e6da8e70fde035d3c44716f939e8167795a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -76,6 +76,11 @@ audio_refclk1: clock-controller at 82e4 {
 			assigned-clock-parents = <&k3_clks 157 18>;
 			#clock-cells = <0>;
 		};
+
+		dss_clk_ctrl: dss_clk_ctrl at 8300 {
+			compatible = "ti,am625-dss-clk-ctrl", "syscon";
+			reg = <0x8300 0x4>;
+		};
 	};
 
 	dmss: bus at 48000000 {
@@ -787,6 +792,7 @@ dss: dss at 30200000 {
 			 <&k3_clks 186 2>;
 		clock-names = "fck", "vp1", "vp2";
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		ti,clk-ctrl = <&dss_clk_ctrl>;
 		status = "disabled";
 
 		dss_ports: ports {

-- 
2.50.1