[PATCH 3/4] arm64: dts: ti: k3-am62-main: Add tidss clk-ctrl property

[Rob Herring]

On Wed, Jul 30, 2025 at 07:02:46PM +0200, Louis Chauvet wrote:
> For am62 processors, we need to use the newly created clk-ctrl property to
> properly handle data edge sampling configuration. Add them in the main
> device tree.
> 
> Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
> Signed-off-by: Louis Chauvet <louis.chauvet at bootlin.com>
> ---
> 
> Cc: stable at vger.kernel.org
> ---
>  arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> index 9e0b6eee9ac77d66869915b2d7bec3e2275c03ea..d3131e6da8e70fde035d3c44716f939e8167795a 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> @@ -76,6 +76,11 @@ audio_refclk1: clock-controller at 82e4 {
>  			assigned-clock-parents = <&k3_clks 157 18>;
>  			#clock-cells = <0>;
>  		};
> +
> +		dss_clk_ctrl: dss_clk_ctrl at 8300 {
> +			compatible = "ti,am625-dss-clk-ctrl", "syscon";
> +			reg = <0x8300 0x4>;

H/w blocks are rarely only 4 bytes of registers... Does this belong to 
some larger block. The problem with bindings defining single registers 
like this is they don't get defined until needed and you have a constant 
stream of DT updates.

> +		};
>  	};
>  
>  	dmss: bus at 48000000 {
> @@ -787,6 +792,7 @@ dss: dss at 30200000 {
>  			 <&k3_clks 186 2>;
>  		clock-names = "fck", "vp1", "vp2";
>  		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> +		ti,clk-ctrl = <&dss_clk_ctrl>;
>  		status = "disabled";
>  
>  		dss_ports: ports {
> 
> -- 
> 2.50.1
>