[PATCH 0/3] arm64: dts: rockchip: Fix HDMI output on RK3576

Nicolas Frattaroli nicolas.frattaroli at collabora.com
Thu Jun 12 12:13:00 UTC 2025


On Wednesday, 11 June 2025 23:47:46 Central European Summer Time Cristian Ciocaltea wrote:
> Since commit c871a311edf0 ("phy: rockchip: samsung-hdptx: Setup TMDS
> char rate via phy_configure_opts_hdmi"), the workaround of passing the
> PHY rate from DW HDMI QP bridge driver via phy_set_bus_width() became
> partially broken, unless the rate adjustment is done as with RK3588,
> i.e. by CCF from VOP2.
> 
> Attempting to fix this up at PHY level would not only introduce
> additional hacks, but it would also fail to adequately resolve the
> display issues that are a consequence of the system CRU limitations.
> 
> Therefore, let's proceed with the solution already implemented for
> RK3588, that is to make use of the HDMI PHY PLL as a more accurate DCLK
> source in VOP2.
> 
> It's worth noting a follow-up patch is going to drop the hack from the
> bridge driver altogether, while switching to HDMI PHY configuration API
> for setting up the TMDS character rate.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
> ---
> Cristian Ciocaltea (3):
>       dt-bindings: display: vop2: Add optional PLL clock property for rk3576
>       arm64: dts: rockchip: Enable HDMI PHY clk provider on rk3576
>       arm64: dts: rockchip: Add HDMI PHY PLL clock source to VOP2 on rk3576
> 
>  .../bindings/display/rockchip/rockchip-vop2.yaml   | 56 +++++++++++++++++-----
>  arch/arm64/boot/dts/rockchip/rk3576.dtsi           |  7 ++-
>  2 files changed, 49 insertions(+), 14 deletions(-)
> ---
> base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
> change-id: 20250611-rk3576-hdmitx-fix-e030fbdb0d17
> 
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
> 

For the whole series:

Tested-by: Nicolas Frattaroli <nicolas.frattaroli at collabora.com>

This fixes HDMI output for 4K resolutions on my RK3576 ArmSoM Sige5.
The DTB checks and bindings checks pass as well.

Kind regards,
Nicolas Frattaroli




More information about the dri-devel mailing list