[PATCH 0/3] arm64: dts: rockchip: Fix HDMI output on RK3576

Cristian Ciocaltea cristian.ciocaltea at collabora.com
Thu Jun 12 12:30:23 UTC 2025


Hi Nicolas,

On 6/12/25 3:13 PM, Nicolas Frattaroli wrote:
> On Wednesday, 11 June 2025 23:47:46 Central European Summer Time Cristian Ciocaltea wrote:
>> Since commit c871a311edf0 ("phy: rockchip: samsung-hdptx: Setup TMDS
>> char rate via phy_configure_opts_hdmi"), the workaround of passing the
>> PHY rate from DW HDMI QP bridge driver via phy_set_bus_width() became
>> partially broken, unless the rate adjustment is done as with RK3588,
>> i.e. by CCF from VOP2.
>>
>> Attempting to fix this up at PHY level would not only introduce
>> additional hacks, but it would also fail to adequately resolve the
>> display issues that are a consequence of the system CRU limitations.
>>
>> Therefore, let's proceed with the solution already implemented for
>> RK3588, that is to make use of the HDMI PHY PLL as a more accurate DCLK
>> source in VOP2.
>>
>> It's worth noting a follow-up patch is going to drop the hack from the
>> bridge driver altogether, while switching to HDMI PHY configuration API
>> for setting up the TMDS character rate.
>>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
>> ---
>> Cristian Ciocaltea (3):
>>       dt-bindings: display: vop2: Add optional PLL clock property for rk3576
>>       arm64: dts: rockchip: Enable HDMI PHY clk provider on rk3576
>>       arm64: dts: rockchip: Add HDMI PHY PLL clock source to VOP2 on rk3576
>>
>>  .../bindings/display/rockchip/rockchip-vop2.yaml   | 56 +++++++++++++++++-----
>>  arch/arm64/boot/dts/rockchip/rk3576.dtsi           |  7 ++-
>>  2 files changed, 49 insertions(+), 14 deletions(-)
>> ---
>> base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
>> change-id: 20250611-rk3576-hdmitx-fix-e030fbdb0d17
>>
> 
> For the whole series:
> 
> Tested-by: Nicolas Frattaroli <nicolas.frattaroli at collabora.com>
> 
> This fixes HDMI output for 4K resolutions on my RK3576 ArmSoM Sige5.
> The DTB checks and bindings checks pass as well.
Many thanks for the additional testing!

Regards,
Cristian


More information about the dri-devel mailing list