[PATCH v6 06/20] mailbox: mtk-cmdq: Add GCE hardware virtualization configuration

[CK Hu (胡俊光)]

On Mon, 2025-06-02 at 01:31 +0800, Jason-JH Lin wrote:
> The GCE hardware virtualization configuration supports the isolation of
> GCE hardware resources across different OS environments. Each OS is
> treated as a virtual machine (VM) for GCE purposes.
> There are 6 VMs and 1 host VM. The host VM has main control over the
> GCE virtualization settings for all VMs.
> 
> To properly access the GCE thread registers, it is necessary to
> configure access permissions for specific GCE threads assigned to
> different VMs.
> Currently, since only the host VM is being used, it is required to
> enable access permissions for all GCE threads for the host VM.
> 
> There are 2 VM configurations:
> 1. VM_ID_MAP
> There are 4 registers to allocate 32 GCE threads across different VMs:
> VM_ID_MAP0 for threads 0-9, VM_ID_MAP1 for threads 10-19,
> VM_ID_MAP2 for threads 20-29, and VM_ID_MAP3 for threads 30-31.
> Each thread has a 3-bit configuration, where setting all bits to 1
> configures the thread for the host VM.
> 
> 2. VM_CPR_GSIZE
> It is used to allocate the CPR SRAM size to each VM. Each VM has 4-bit
> configuration, where setting bit 0-3 to configures the size of host VM.
> This setting must be configured before the VM configuration to prevent
> resource leakage.
> 
> Signed-off-by: Jason-JH Lin <jason-jh.lin at mediatek.com>
> ---

[snip]

> +
>  static void cmdq_gctl_value_toggle(struct cmdq *cmdq, bool ddr_enable)
>  {
>  	u32 val = cmdq->pdata->control_by_sw ? GCE_CTRL_BY_SW : 0;
> @@ -162,6 +211,7 @@ static void cmdq_init(struct cmdq *cmdq)
>  
>  	WARN_ON(clk_bulk_enable(cmdq->pdata->gce_num, cmdq->clocks));
>  
> +	cmdq_vm_toggle(cmdq, true);
>  	cmdq_gctl_value_toggle(cmdq, true);
>  
>  	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
> @@ -335,6 +385,7 @@ static int cmdq_runtime_resume(struct device *dev)
>  	if (ret)
>  		return ret;
>  
> +	cmdq_vm_toggle(cmdq, true);
>  	cmdq_gctl_value_toggle(cmdq, true);
>  	return 0;
>  }
> @@ -344,6 +395,7 @@ static int cmdq_runtime_suspend(struct device *dev)
>  	struct cmdq *cmdq = dev_get_drvdata(dev);
>  
>  	cmdq_gctl_value_toggle(cmdq, false);
> +	cmdq_vm_toggle(cmdq, false);

Why turn off permission when suspend?
Why not always turn on permission?

Regards,
CK

>  	clk_bulk_disable(cmdq->pdata->gce_num, cmdq->clocks);
>  	return 0;
>  }

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20250627/752e961a/attachment-0001.htm>