[PATCH v3 2/3] i2c: stm32f7: unmap DMA mapped buffer

[Clément Le Goffic]

Fix an issue where the mapped DMA buffer was not unmapped.

Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
Acked-by: Alain Volmat <alain.volmat at foss.st.com>
Signed-off-by: Clément Le Goffic <clement.legoffic at foss.st.com>
---
 drivers/i2c/busses/i2c-stm32f7.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index e4aaeb2262d0..042386b4cabe 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1554,6 +1554,8 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
 	if (i2c_dev->use_dma) {
 		stm32f7_i2c_disable_dma_req(i2c_dev);
 		dmaengine_terminate_async(dma->chan_using);
+		dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
+				 dma->dma_data_dir);
 	}
 
 	i2c_dev->master_mode = false;
@@ -1622,6 +1624,8 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
 		if (i2c_dev->use_dma) {
 			stm32f7_i2c_disable_dma_req(i2c_dev);
 			dmaengine_terminate_async(dma->chan_using);
+			dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
+					 dma->dma_data_dir);
 		}
 		f7_msg->result = -ENXIO;
 	}
@@ -1642,6 +1646,8 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
 				dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
 				stm32f7_i2c_disable_dma_req(i2c_dev);
 				dmaengine_terminate_async(dma->chan_using);
+				dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
+						 dma->dma_data_dir);
 				f7_msg->result = -ETIMEDOUT;
 			}
 		}

-- 
2.43.0