[PATCH v3 2/3] i2c: stm32f7: unmap DMA mapped buffer

[Pierre Yves MORDRET]

Hi Clement,


On 6/30/25 14:55, Clément Le Goffic wrote:
> Fix an issue where the mapped DMA buffer was not unmapped.
> 
> Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
> Acked-by: Alain Volmat <alain.volmat at foss.st.com>
> Signed-off-by: Clément Le Goffic <clement.legoffic at foss.st.com>
> ---
>  drivers/i2c/busses/i2c-stm32f7.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index e4aaeb2262d0..042386b4cabe 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -1554,6 +1554,8 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
>  	if (i2c_dev->use_dma) {
>  		stm32f7_i2c_disable_dma_req(i2c_dev);
>  		dmaengine_terminate_async(dma->chan_using);
> +		dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
> +				 dma->dma_data_dir);
>  	}
>  
>  	i2c_dev->master_mode = false;
> @@ -1622,6 +1624,8 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
>  		if (i2c_dev->use_dma) {
>  			stm32f7_i2c_disable_dma_req(i2c_dev);
>  			dmaengine_terminate_async(dma->chan_using);
> +			dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
> +					 dma->dma_data_dir);
>  		}
>  		f7_msg->result = -ENXIO;
>  	}
> @@ -1642,6 +1646,8 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
>  				dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
>  				stm32f7_i2c_disable_dma_req(i2c_dev);
>  				dmaengine_terminate_async(dma->chan_using);
> +				dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
> +						 dma->dma_data_dir);
>  				f7_msg->result = -ETIMEDOUT;
>  			}
>  		}
> 

Thx for this V3 submission

Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret at foss.st.com>

Regards

-- 
--
~ Py MORDRET
--