[PATCH v5 06/24] clk: qcom: dispcc-sm8750: Fix setting rate byte and pixel clocks

[Dmitry Baryshkov]

On Wed, Apr 30, 2025 at 03:00:36PM +0200, Krzysztof Kozlowski wrote:
> On SM8750 the setting rate of pixel and byte clocks, while the parent
> DSI PHY PLL, fails with:
> 
>   disp_cc_mdss_byte0_clk_src: rcg didn't update its configuration.
> 
> DSI PHY PLL has to be unprepared and its "PLL Power Down" bits in
> CMN_CTRL_0 asserted.
> 
> Mark these clocks with CLK_OPS_PARENT_ENABLE to ensure the parent is
> enabled during rate changes.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> 
> ---
> 
> Patch is independent and can go via separate tree. Including here for
> complete picture of clock debugging issues.
> 
> Changes in v5:
> 1. New patch
> ---
>  drivers/clk/qcom/dispcc-sm8750.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/qcom/dispcc-sm8750.c b/drivers/clk/qcom/dispcc-sm8750.c
> index 877b40d50e6ff5501df16edcffb6cf3322c65977..d86f3def6dd06b6f6f7a25018a856dcc86fc48eb 100644
> --- a/drivers/clk/qcom/dispcc-sm8750.c
> +++ b/drivers/clk/qcom/dispcc-sm8750.c
> @@ -393,7 +393,7 @@ static struct clk_rcg2 disp_cc_mdss_byte0_clk_src = {
>  		.name = "disp_cc_mdss_byte0_clk_src",
>  		.parent_data = disp_cc_parent_data_1,
>  		.num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
> -		.flags = CLK_SET_RATE_PARENT,
> +		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
>  		.ops = &clk_byte2_ops,
>  	},
>  };
> @@ -712,7 +712,7 @@ static struct clk_rcg2 disp_cc_mdss_pclk0_clk_src = {
>  		.name = "disp_cc_mdss_pclk0_clk_src",
>  		.parent_data = disp_cc_parent_data_1,
>  		.num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
> -		.flags = CLK_SET_RATE_PARENT,
> +		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,

I assume that these flags should be set for DSI1 clocks too.

>  		.ops = &clk_pixel_ops,
>  	},
>  };
> 
> -- 
> 2.45.2
> 

-- 
With best wishes
Dmitry