[PATCH v5 06/24] clk: qcom: dispcc-sm8750: Fix setting rate byte and pixel clocks

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Mon May 5 06:15:17 UTC 2025


On 03/05/2025 00:42, Dmitry Baryshkov wrote:
> On Wed, Apr 30, 2025 at 03:00:36PM +0200, Krzysztof Kozlowski wrote:
>> On SM8750 the setting rate of pixel and byte clocks, while the parent
>> DSI PHY PLL, fails with:
>>
>>   disp_cc_mdss_byte0_clk_src: rcg didn't update its configuration.
>>
>> DSI PHY PLL has to be unprepared and its "PLL Power Down" bits in
>> CMN_CTRL_0 asserted.
>>
>> Mark these clocks with CLK_OPS_PARENT_ENABLE to ensure the parent is
>> enabled during rate changes.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
>>
>> ---
>>
>> Patch is independent and can go via separate tree. Including here for
>> complete picture of clock debugging issues.
>>
>> Changes in v5:
>> 1. New patch
>> ---
>>  drivers/clk/qcom/dispcc-sm8750.c | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/clk/qcom/dispcc-sm8750.c b/drivers/clk/qcom/dispcc-sm8750.c
>> index 877b40d50e6ff5501df16edcffb6cf3322c65977..d86f3def6dd06b6f6f7a25018a856dcc86fc48eb 100644
>> --- a/drivers/clk/qcom/dispcc-sm8750.c
>> +++ b/drivers/clk/qcom/dispcc-sm8750.c
>> @@ -393,7 +393,7 @@ static struct clk_rcg2 disp_cc_mdss_byte0_clk_src = {
>>  		.name = "disp_cc_mdss_byte0_clk_src",
>>  		.parent_data = disp_cc_parent_data_1,
>>  		.num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
>> -		.flags = CLK_SET_RATE_PARENT,
>> +		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
>>  		.ops = &clk_byte2_ops,
>>  	},
>>  };
>> @@ -712,7 +712,7 @@ static struct clk_rcg2 disp_cc_mdss_pclk0_clk_src = {
>>  		.name = "disp_cc_mdss_pclk0_clk_src",
>>  		.parent_data = disp_cc_parent_data_1,
>>  		.num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
>> -		.flags = CLK_SET_RATE_PARENT,
>> +		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
> 
> I assume that these flags should be set for DSI1 clocks too.


Indeed.



Best regards,
Krzysztof


More information about the dri-devel mailing list