[PATCH v7 1/2] arm64: dts: qcom: sa8775p: add Display Serial Interface device nodes

[Dmitry Baryshkov]

On Mon, May 19, 2025 at 04:30:55PM +0530, Ayushi Makhija wrote:
> On 5/19/2025 6:31 AM, Dmitry Baryshkov wrote:
> > On Tue, May 13, 2025 at 03:56:10PM +0530, Ayushi Makhija wrote:
> >> From: Ayushi Makhija <quic_amakhija at quicinc.com>
> >>
> >> Add device tree nodes for the DSI0 and DSI1 controllers
> >> with their corresponding PHYs found on Qualcomm SA8775P SoC.
> >>
> >> Signed-off-by: Ayushi Makhija <quic_amakhija at quicinc.com>
> >> Reviewed-by: Dmitry Baryshkov <lumag at kernel.org>
> >> Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
> >> ---
> >>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 186 +++++++++++++++++++++++++-
> >>  1 file changed, 185 insertions(+), 1 deletion(-)

> >> +
> >> +				dsi0_opp_table: opp-table {
> > 
> > mdss_dsi_opp_table: opp-table {}
> > 
> >> +					compatible = "operating-points-v2";
> >> +
> >> +					opp-358000000 {
> > 
> > Is there only one entry? Usually there are several.
> > 
> 
> Hi Dmitry,
> 
> Thanks, for the review.
> 
> In the IP catalog Clock documentation of SA8775P, the same DSI clock frequency (358Mhz)
> is mentioned for all the voltage corners (svs_l1, nom, turbo and turbo_l1).
> That's why I kept the single entry opp-358000000 for 358Mhz and selected lowest voltage corner svs_l1.
>  
> I will address rest of the comments in next version of series.

Ack, thanks for the confirmation.

-- 
With best wishes
Dmitry