Etnaviv+Mesa 13 on IMX6Q with Linux 4.8.10

[Марокко]

Now I use "armada" driver instead of "fbdev" and now it works:

[   382.474] (--) armada(0): Vivante GC320 GPU revision 5007 (etnaviv) 2d PE2.0
[   382.475] (II) armada(0): [DRI2] Setup complete
[   382.475] (II) armada(0): [DRI2]   DRI driver: etnaviv
[   382.475] (II) armada(0): direct rendering: DRI2 enabled
[   382.475] (**) armada(0): direct rendering: DRI3 disabled
[   382.478] (II) armada(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   382.481] (==) armada(0): DPMS enabled
[   382.481] (==) armada(0): hotplug detection enabled
[   382.483] (II) armada(0): etnaviv: Xv: using YUY2 tiled format intermediate YUV target
[   382.556] (--) RandR disabled
[   382.725] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   382.725] (II) AIGLX: enabled GLX_ARB_create_context
[   382.725] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   382.725] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   382.725] (II) AIGLX: enabled GLX_INTEL_swap_event
[   382.725] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   382.725] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   382.725] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   382.726] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   382.732] (II) AIGLX: Loaded and initialized etnaviv
[   382.732] (II) GLX: Initialized DRI2 GL provider for screen 0
...
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
300 frames in 5.0 seconds = 59.804 FPS
301 frames in 5.0 seconds = 60.005 FPS

Thank you!

31.01.2017, 22:09, "Fabio Estevam" <festevam at gmail.com>:
> On Tue, Jan 31, 2017 at 11:17 AM, Марокко <marokko90 at yandex.ru> wrote:
>>  I have the same result with Kernel 4.9.5, Mesa 17.0.0 and libdrm 2.4.75:
>>  [ 68137.779] (II) AIGLX: Screen 0 is not DRI2 capable
>>  [ 68137.780] (EE) AIGLX: reverting to software rendering
>>  [ 68137.837] (II) AIGLX: Loaded and initialized swrast
>>  [ 68137.837] (II) GLX: Initialized DRISWRAST GL provider for screen 0
>>
>>  Which options I should use at xorg.conf?
>
> Are you using Russell's xf86-video-armada driver?
>
> Take a look at http://git.arm.linux.org.uk/cgit/xf86-video-armada.git/tree/README?h=unstable-devel

-- 
С уважением, Марокко