[PATCH V4 21/23] drm/etnaviv: need to disable clock gating when doing profiling

Christian Gmeiner christian.gmeiner at gmail.com
Wed Sep 13 14:36:32 UTC 2017


Hi Lucas

2017-09-13 13:05 GMT+02:00 Lucas Stach <l.stach at pengutronix.de>:
> Am Dienstag, den 12.09.2017, 17:11 +0200 schrieb Christian Gmeiner:
>> As done by Vivante kernel driver.
>
> You need to move the VIVS_HI_CLOCK_CONTROL_DISABLE_DEBUG_REGISTERS from
> etnaviv_gpu_update_clock to the GPU init path. Otherwise a thermal
> throttling request may disable the debug registers again, while the
> profiled commandstream is in flight on the GPU.
>

Will be fixed in next version.

> Regards,
> Lucas
>
>> Signed-off-by: Christian Gmeiner <christian.gmeiner at gmail.com>
>> Reviewed-by: Lucas Stach <l.stach at pengutronix.de>
>> ---
>>  drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
>> index 842b6642dcd6..04acc3a64c3c 100644
>> --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
>> +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
>> @@ -1341,6 +1341,13 @@ static void sync_point_perfmon_sample(struct etnaviv_gpu *gpu,
>>  static void sync_point_perfmon_sample_pre(struct etnaviv_gpu *gpu,
>>       struct etnaviv_event *event)
>>  {
>> +     u32 val;
>> +
>> +     /* disable clock gating */
>> +     val = gpu_read(gpu, VIVS_PM_POWER_CONTROLS);
>> +     val &= ~VIVS_PM_POWER_CONTROLS_ENABLE_MODULE_CLOCK_GATING;
>> +     gpu_write(gpu, VIVS_PM_POWER_CONTROLS, val);
>> +
>>       sync_point_perfmon_sample(gpu, event, ETNA_PM_PROCESS_PRE);
>>  }
>>
>> @@ -1349,6 +1356,7 @@ static void sync_point_perfmon_sample_post(struct etnaviv_gpu *gpu,
>>  {
>>       const struct etnaviv_cmdbuf *cmdbuf = event->cmdbuf;
>>       unsigned int i;
>> +     u32 val;
>>
>>       sync_point_perfmon_sample(gpu, event, ETNA_PM_PROCESS_POST);
>>
>> @@ -1357,6 +1365,11 @@ static void sync_point_perfmon_sample_post(struct etnaviv_gpu *gpu,
>>
>>               *pmr->bo_vma = pmr->sequence;
>>       }
>> +
>> +     /* enable clock gating */
>> +     val = gpu_read(gpu, VIVS_PM_POWER_CONTROLS);
>> +     val |= VIVS_PM_POWER_CONTROLS_ENABLE_MODULE_CLOCK_GATING;
>> +     gpu_write(gpu, VIVS_PM_POWER_CONTROLS, val);
>>  }
>>
>>
>
>

greets
--
Christian Gmeiner, MSc

https://christian-gmeiner.info


More information about the etnaviv mailing list