[fprint] AES1660: call for testers

[Andreas]

Hi all,


the driver seems to work also for me for practical purposes. Success 
rate for verification is around 50%, which is significantly worse than 
under windows (about 90%).

The success rate highly depends on the quality of the model fingerprint 
in the database. So if the first scan in fprint_demo is not good, one 
cannot expect a high success rate (of course!).

Therefore I propose for the future an extension for fprint_demo that 
makes it possible to compose a high quality image from several scans of 
the same finger. Unfortunately, I have at the moment not the time to 
implement this.

Best,
andreas





On 22.11.2012 08:35, Vasily Khoruzhick wrote:
> Hi,
>
> This is another call for testing.
>
> BIG FAT WARNING: PLEASE KEEP FPRINT MAILLIST IN CC!
>
> I've just pushed improved aes1660 driver into aes1660-dev-v2 branch of
> my libfprint repo on github.
> This one mimics windows driver behavior completely (and works much
> better for me!).
>
> To obtain it:
>
> 1. if you already cloned my repo:
> cd libfprint
> git checkout master
> git pull
> git checkout -b aes1660-dev-v2 origin/aes1660-dev-v2
>
> 2. Fresh clone:
> git clone git://github.com/anarsoul/libfprint.git
> cd libfprint
> git checkout -b aes1660-dev-v2 origin/aes1660-dev-v2
>
> Use instructions from my previous post to compile and test it.
>
> Regards
> Vasily
>
> On Sun, Nov 18, 2012 at 12:01 PM, Vasily Khoruzhick <anarsoul at gmail.com> wrote:
>> Hi,
>>
>> I've just pushed aes1660 driver code into my libfprint github repo,
>> branch aes1660-dev,
>> so it would be nice to get some testing reports from AES1660-owners :)
>>
>> To get it do:
>>
>> git clone git://github.com/anarsoul/libfprint.git
>> cd libfprint
>> git checkout -b aes1660-dev origin/aes1660-dev
>>
>> Install fprint_demo from your distro repos, and then install libfprint into home
>>
>> ./autogen.sh
>> ./configure --prefix=/home/your_user/usr --enable-debug-log
>> make -j4
>> make install # No sudo here!
>>
>> And then try fprint_demo:
>>
>> export LD_LIBRARY_PATH=/home/your_user/usr/lib
>> fprint_demo
>>
>> If your user have no enough permissions do:
>>
>> sudo su
>> export LD_LIBRARY_PATH=/home/your_user/usr/lib
>> fprint_demo
>>
>> If it crashes, or does not work properly for you collect and send me
>> debug logs from console while running fprint_demo
>>
>> Regards
>> Vasily
>

-- 
___________________________________
  Andreas Loos
  Kurt-Exner-Straße 6
  10249 Berlin

  http://www.andreas-loos.com
___________________________________