[fprint] AES1660: AES2660: call for testers

Vasily Khoruzhick anarsoul at gmail.com
Tue Nov 27 00:32:55 PST 2012


On Tue, Nov 27, 2012 at 1:57 AM, Davy RENAUD <davy.renaud at laposte.net> wrote:
> Hi,

Hi Davy,

please keep fprint maillist in CC.

> So i've tested the new version with AES 1660, and i found out a bug that is maybe not related to those new drivers and rewrite you made.
>
> When i just touch the sensor by enroll without sliding the finger, the scan normally fails but i can't manage to enroll any finger again (see log 2). The finger slide seems not detected (and there is an error in the log). I need to restart to get it working again.

Not driver-related at all, probably bug in fprint_demo. I'll take a
look a bit later, thanks.

Regards
Vasily

> If i use the identify tool first : when i touch it fail with error -22 (shown on the interface of fprint_demo) but i can try to verify again, and after I can use enroll.
> But when it fails with "enroll" when i just touch the sensor i can not enroll nor identify again : the scan is not recognized.
>
> I'm not sure i'm clear enough, but this is just a matter to deal accidental touch of the sensor that can block the fingerprint scanner.
>
> Hope you'll manage to reproduce the bug and the if it's really related to your work.
> Thank you again for this work.
>
> Davy.
>
>
>
>
>
>> Message du 25/11/12 19:35
>> De : "Vasily Khoruzhick"
>> A : fprint at lists.freedesktop.org
>> Copie à : "Ilya Hegai" , "Davy RENAUD" , a.loos at andreas-loos.com, "Alexandre Keledjian" , "Petr Dlouhý"
>
>> Objet : AES1660: AES2660: call for testers
>>
>> Hi all,
>>
>> It's 3rd testing round for AES1660 owners.
>> And 1st for AES2660 owners :)
>>
>> BIG FAT WARNING: PLEASE KEEP FPRINT MAILLIST IN CC!
>>
>> New code is in aesx660-dev branch. Almost no changes for AES1660 owners.
>> This branch intoduces AES2660 driver, and this driver shares almost
>> all code with
>> AES1660. So I want to ensure that code reorganization did not break
>> anything for AES1660.
>>
>> To obtain it:
>>
>> 1. if you already cloned my repo:
>> cd libfprint
>> git checkout master
>> git pull
>> git checkout -b aesx660-dev origin/aesx660-dev
>>
>> 2. Fresh clone:
>> git clone git://github.com/anarsoul/libfprint.git
>> cd libfprint
>> git checkout -b aesx660-dev origin/aesx660-dev
>>
>> Use instructions from my previous post [1] to compile and test it.
>>
>> Regards
>> Vasily
>>
>> [1] http://lists.freedesktop.org/archives/fprint/2012-November/000330.html
>>
>> > Hi,
>> >
>> > This is another call for testing.
>> >
>> > BIG FAT WARNING: PLEASE KEEP FPRINT MAILLIST IN CC!
>> >
>> > I've just pushed improved aes1660 driver into aes1660-dev-v2 branch of
>> > my libfprint repo on github.
>> > This one mimics windows driver behavior completely (and works much
>> > better for me!).
>> >
>> > To obtain it:
>> >
>> > 1. if you already cloned my repo:
>> > cd libfprint
>> > git checkout master
>> > git pull
>> > git checkout -b aes1660-dev-v2 origin/aes1660-dev-v2
>> >
>> > 2. Fresh clone:
>> > git clone git://github.com/anarsoul/libfprint.git
>> > cd libfprint
>> > git checkout -b aes1660-dev-v2 origin/aes1660-dev-v2
>> >
>> > Use instructions from my previous post to compile and test it.
>> >
>> > Regards
>> > Vasily
>> >
>> > On Sun, Nov 18, 2012 at 12:01 PM, Vasily Khoruzhick  wrote:
>> >> Hi,
>> >>
>> >> I've just pushed aes1660 driver code into my libfprint github repo,
>> >> branch aes1660-dev,
>> >> so it would be nice to get some testing reports from AES1660-owners :)
>> >>
>> >> To get it do:
>> >>
>> >> git clone git://github.com/anarsoul/libfprint.git
>> >> cd libfprint
>> >> git checkout -b aes1660-dev origin/aes1660-dev
>> >>
>> >> Install fprint_demo from your distro repos, and then install libfprint into home
>> >>
>> >> ./autogen.sh
>> >> ./configure --prefix=/home/your_user/usr --enable-debug-log
>> >> make -j4
>> >> make install # No sudo here!
>> >>
>> >> And then try fprint_demo:
>> >>
>> >> export LD_LIBRARY_PATH=/home/your_user/usr/lib
>> >> fprint_demo
>> >>
>> >> If your user have no enough permissions do:
>> >>
>> >> sudo su
>> >> export LD_LIBRARY_PATH=/home/your_user/usr/lib
>> >> fprint_demo
>> >>
>> >> If it crashes, or does not work properly for you collect and send me
>> >> debug logs from console while running fprint_demo
>> >>
>> >> Regards
>> >> Vasily
>>
>
> Une messagerie gratuite, garantie à vie et des services en plus, ça vous tente ?
> Je crée ma boîte mail www.laposte.net


More information about the fprint mailing list