[fprint] Call for testing: UPEK 147e:1001, AES1660, AES1610, AES2501, AES2550, AES2810, AES2660

Tue Feb 9 22:01:16 UTC 2016

Attached

W dniu 09.02.2016 o 22:24, Vasily Khoruzhick pisze:
> So it doesn't detect finger removal. Please apply this patch,
> recompile libfprint and make another log. Thanks!
> 
> On Tue, Feb 9, 2016 at 1:12 PM, Julian Sikorski <belegdol at gmail.com> wrote:
>> W dniu 09.02.2016 o 20:14, Vasily Khoruzhick pisze:
>>> Hi Julian,
>>>
>>> On Sun, Feb 7, 2016 at 12:30 AM, Julian Sikorski <belegdol at gmail.com> wrote:
>>>> W dniu 02.01.2016 o 01:53, Vasily Khoruzhick pisze:
>>>>> On Fri, Jan 1, 2016 at 3:41 PM, Julian Sikorski <belegdol at gmail.com> wrote:
>>>>>> Hi Vasily,
>>>>>
>>>>> Hi Julian,
>>>>
>>>> Hi Vasily,
>>>>>
>>>>>> I should have checked git first, sorry about that. I updated the Fedora
>>>>>> package locally to use git source and the scanner is working, thank you!
>>>>>
>>>>> Thanks a lot for testing!
>>>>>
>>>>>> The only issue is that is seems somewhat unresponsive - it appears that
>>>>>> it takes some time until a fingerprint is processed, plus there is no
>>>>>> messsage that matching failed on the login screen:
>>>>>>
>>>>>> - I swiped my finger
>>>>>> - I waited 15 seconds, nothing happened
>>>>>> - I swiped again, logged in immediately
>>>>>
>>>>> Report these issues to gdm developers. libfprint/fprintd/pam_fprintd
>>>>> report failures properly, you can check it by invoking
>>>>> "fprintd-verify" from console.
>>>>
>>>> It took me some time but I finally managed to reproduce the issue with
>>>> fprintd-verify alone:
>>>>
>>>> $ fprintd-verify
>>>> Using device /net/reactivated/Fprint/Device/0
>>>> Listing enrolled fingers:
>>>>  - #0: right-index-finger
>>>>
>>>> It appears that if I swipe my finger only once, fprint will get stuck
>>>> here. On the other hand, if I 'wake' the scanner again - by swiping a
>>>> different finger for example - the verification will happen immediately.
>>>>
>>>> Verify result: verify-match (done)
>>>> ReleaseDevice failed: Message did not receive a reply (timeout by
>>>> message bus)
>>>
>>> I'll try to reproduce it with my device. Meanwhile could you please
>>> compile libfprint with debug logs enabled,
>>> start fprintd manually (just kill running daemon with "sudo pkill -9
>>> fprintd" and start a new one in console with "/usr/lib/fprintd"),
>>> try to reproduce the issue and then save log and send it to me.
>>
>> Hi Vasily,
>>
>> please find attached. After the first swipe fprintd is spamming the
>> console with the lines like
>>
>> upeksonly:debug [row_complete] diff is 236
>>
>> Best regards,
>> Julian
>>
>>
>>>
>>>> Best regards,
>>>> Julian
>>>>
>>>>>
>>>>>> Another minor annoyance is that the default keyring is still asking for
>>>>>> password which partially defeats the point of logging in with
>>>>>> fingerprint as the password needs to be entered anyway.
>>>>>> Aside from these two, great work, thank you again!
>>>>>>
>>>>>> Best regards,
>>>>>> Julian
>>>>>>
>>>>>> W dniu 01.01.2016 o 21:26, Vasily Khoruzhick pisze:
>>>>>>> Hi Julian,
>>>>>>>
>>>>>>> libfprint from git master supports 147e:1001. See
>>>>>>> http://cgit.freedesktop.org/libfprint/libfprint/commit/?id=6fc5293e8330e65ed21c0e43a18b3be061933e74
>>>>>>>
>>>>>>> Regards,
>>>>>>> Vasily
>>>>>>>
>>>>>>> On Fri, Jan 1, 2016 at 10:25 AM, Julian Sikorski <belegdol at gmail.com> wrote:
>>>>>>>> Hi list,
>>>>>>>>
>>>>>>>> was there ever any new development for 147e:1001? libfprint-0.6.0 does
>>>>>>>> not seem to contain these drivers.
>>>>>>>>
>>>>>>>> Best regards,
>>>>>>>> Julian
>>>>>>>>
>>>>>>>> W dniu 22.03.2014 o 06:46, Julian Sikorski pisze:
>>>>>>>>> Hi Vasily,
>>>>>>>>>
>>>>>>>>> I don't know if it times out every time, but the results look the same
>>>>>>>>> from the user perspective.
>>>>>>>>> How do I know fprint_demo is ready for enrollment, and that I should
>>>>>>>>> continue with re-scanning the finger?
>>>>>>>>>
>>>>>>>>> Best regards,
>>>>>>>>> Julian
>>>>>>>>>
>>>>>>>>> W dniu 20.03.2014 09:04, Vasily Khoruzhick pisze:
>>>>>>>>>> Hi Julian,
>>>>>>>>>>
>>>>>>>>>> According to log, it looks like one control transfer (write reg) of
>>>>>>>>>> deinit sequence timed out. Does it happen all the time?
>>>>>>>>>>
>>>>>>>>>> Please note, that with latest changes all imaging devices do 5 scans
>>>>>>>>>> for enrollment.
>>>>>>>>>>
>>>>>>>>>> Regards
>>>>>>>>>> Vasily
>>>>>>>>>>
>>>>>>>>>> On Thu, Mar 20, 2014 at 9:13 AM, Julian Sikorski <belegdol at gmail.com> wrote:
>>>>>>>>>>> W dniu 16.03.2014 11:45, Vasily Khoruzhick pisze:
>>>>>>>>>>>> Hi to all fingerprint scanner users,
>>>>>>>>>>>>
>>>>>>>>>>>> It's another call for libfprint testing.
>>>>>>>>>>>>
>>>>>>>>>>>> Good news to all UPEK 147e:1001 users - I've added support for that
>>>>>>>>>>>> device into upeksonly driver - so it worth testing. It also may work
>>>>>>>>>>>> for 147e:1002 device - just try to add its USB IDs into upeksonly.c
>>>>>>>>>>>> and use UPEKSONLY_1001 variant for it.
>>>>>>>>>>>>
>>>>>>>>>>>> Also I've improved image assembling utilities for all AuthenTec
>>>>>>>>>>>> scanners, so now match rate is a bit better for AES1660 scanner - so
>>>>>>>>>>>> all AES1660 are encouraged to test my changes as well.
>>>>>>>>>>>>
>>>>>>>>>>>> All changes are pushed into master branch of
>>>>>>>>>>>> git://github.com/anarsoul/libfprint.git repo.
>>>>>>>>>>>>
>>>>>>>>>>>> To obtain the code do:
>>>>>>>>>>>>
>>>>>>>>>>>> git clone git://github.com/anarsoul/libfprint.git
>>>>>>>>>>>>
>>>>>>>>>>>> Use instructions from [1] to compile and test it. Thanks!
>>>>>>>>>>>>
>>>>>>>>>>>> Regards,
>>>>>>>>>>>> Vasily
>>>>>>>>>>>>
>>>>>>>>>>>> P.S. PLEASE KEEP FPRINT MAILLIST IN CC!
>>>>>>>>>>>>
>>>>>>>>>>>> [1] http://lists.freedesktop.org/archives/fprint/2012-November/000330.html
>>>>>>>>>>>>
>>>>>>>>>>> Hello,
>>>>>>>>>>>
>>>>>>>>>>> 147e:1001 does not seem to be working here. When I open fprint_demo and
>>>>>>>>>>> pick a finger to enroll, the child window shows nothing for a while.
>>>>>>>>>>> When I scan my finger regardless, a scan will appear at some point, but
>>>>>>>>>>> with a message "enrollment failed due to bad scan data, press cancel to
>>>>>>>>>>> continue". Logs attached.
>>>>>>>>>>>
>>>>>>>>>>> Best regards,
>>>>>>>>>>> Julian
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> fprint mailing list
>>>>>>>> fprint at lists.freedesktop.org
>>>>>>>> http://lists.freedesktop.org/mailman/listinfo/fprint
>>>>>>
>>>>> _______________________________________________
>>>>> fprint mailing list
>>>>> fprint at lists.freedesktop.org
>>>>> http://lists.freedesktop.org/mailman/listinfo/fprint
>>>>>
>>>>
>>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: fprintd.log.xz
Type: application/x-xz
Size: 55040 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/fprint/attachments/20160209/2af3e6c3/attachment-0001.bin>