[fprint] Call for testing: UPEK 147e:1001, AES1660, AES1610, AES2501, AES2550, AES2810, AES2660

[Vasily Khoruzhick]

Hi Julian,

libfprint from git master supports 147e:1001. See
http://cgit.freedesktop.org/libfprint/libfprint/commit/?id=6fc5293e8330e65ed21c0e43a18b3be061933e74

Regards,
Vasily

On Fri, Jan 1, 2016 at 10:25 AM, Julian Sikorski <belegdol at gmail.com> wrote:
> Hi list,
>
> was there ever any new development for 147e:1001? libfprint-0.6.0 does
> not seem to contain these drivers.
>
> Best regards,
> Julian
>
> W dniu 22.03.2014 o 06:46, Julian Sikorski pisze:
>> Hi Vasily,
>>
>> I don't know if it times out every time, but the results look the same
>> from the user perspective.
>> How do I know fprint_demo is ready for enrollment, and that I should
>> continue with re-scanning the finger?
>>
>> Best regards,
>> Julian
>>
>> W dniu 20.03.2014 09:04, Vasily Khoruzhick pisze:
>>> Hi Julian,
>>>
>>> According to log, it looks like one control transfer (write reg) of
>>> deinit sequence timed out. Does it happen all the time?
>>>
>>> Please note, that with latest changes all imaging devices do 5 scans
>>> for enrollment.
>>>
>>> Regards
>>> Vasily
>>>
>>> On Thu, Mar 20, 2014 at 9:13 AM, Julian Sikorski <belegdol at gmail.com> wrote:
>>>> W dniu 16.03.2014 11:45, Vasily Khoruzhick pisze:
>>>>> Hi to all fingerprint scanner users,
>>>>>
>>>>> It's another call for libfprint testing.
>>>>>
>>>>> Good news to all UPEK 147e:1001 users - I've added support for that
>>>>> device into upeksonly driver - so it worth testing. It also may work
>>>>> for 147e:1002 device - just try to add its USB IDs into upeksonly.c
>>>>> and use UPEKSONLY_1001 variant for it.
>>>>>
>>>>> Also I've improved image assembling utilities for all AuthenTec
>>>>> scanners, so now match rate is a bit better for AES1660 scanner - so
>>>>> all AES1660 are encouraged to test my changes as well.
>>>>>
>>>>> All changes are pushed into master branch of
>>>>> git://github.com/anarsoul/libfprint.git repo.
>>>>>
>>>>> To obtain the code do:
>>>>>
>>>>> git clone git://github.com/anarsoul/libfprint.git
>>>>>
>>>>> Use instructions from [1] to compile and test it. Thanks!
>>>>>
>>>>> Regards,
>>>>> Vasily
>>>>>
>>>>> P.S. PLEASE KEEP FPRINT MAILLIST IN CC!
>>>>>
>>>>> [1] http://lists.freedesktop.org/archives/fprint/2012-November/000330.html
>>>>>
>>>> Hello,
>>>>
>>>> 147e:1001 does not seem to be working here. When I open fprint_demo and
>>>> pick a finger to enroll, the child window shows nothing for a while.
>>>> When I scan my finger regardless, a scan will appear at some point, but
>>>> with a message "enrollment failed due to bad scan data, press cancel to
>>>> continue". Logs attached.
>>>>
>>>> Best regards,
>>>> Julian
>
> _______________________________________________
> fprint mailing list
> fprint at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/fprint