[Freedreno] Prebuild fedora kernel for IFC6410

[XoD]

Hello,

After some try, I have successfully boot my fedora with your upstream
kernel image Rob (from kernel 3.16-rc3 I think so).

With it, I don't have ethernet on the board, this is normal ?

And, for information, I have a lot of time this message :
[drm:mdp4_irq_error_handler] *ERROR* errors: 00000400

But I have successfully get the /proc/config.gz, and I have to investigate
of the diff bettween your and my kernel build config ... when i have some
time.

Thank for your help, I'll try to keep you updated when I have something new.

PS: To test, I also replace the android in emmc with linaro gnome image, so
I tested gnome environment on an arm signle board board :)




2014-08-27 14:08 GMT+02:00 XoD <xoddark at gmail.com>:

> of course, say like that it has immediately more sense :)
>
>
> 2014-08-27 14:03 GMT+02:00 Nicolas Dechesne <nicolas.dechesne at linaro.org>:
>
>
>> On Wed, Aug 27, 2014 at 1:28 PM, XoD <xoddark at gmail.com> wrote:
>>
>>> I have look-at the kernel cmd line, with some small diff, but apparently
>>> nothing significative.
>>> And I tried to extract files from initrd.img but found nothing in the
>>> /proc folder, it's the place to found the config.gz ?
>>>
>>
>> /proc is a virtual filesystem so there is no /proc folder content in the
>> initrd or in any rootfs. you have to boot the kernel, and then at the
>> prompt you can look at /proc content (on a running system).
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/freedreno/attachments/20140829/5d35b843/attachment.html>