[Freedreno] [[RFC]DPU PATCH 0/4] Add suppport for sn65dsi86 bridge chip and Innolux 2k edp panel driver
Sean Paul
seanpaul at chromium.org
Wed Apr 18 14:12:07 UTC 2018
On Wed, Apr 18, 2018 at 05:49:58PM +0530, Sandeep Panda wrote:
> Changelog:
>
> v3 -> v4:
I didn't really bother to do a thorough review given that there are obvious
mistakes and ignored feedback, it's a waste of time, tbh. Please go through
the previous reviews and resend a more polished version.
Sean
> Current patchset separates out eDP panel specific resources from sn65dsi86
> bridge driver and creates a separate driver for the innloux edp panel.
>
> Now bridge driver check if any panel is attached or not to get the supported
> modes. If any panel is attached then query from panel driver to get the modes,
> or else probe the provided i2c adapter to read the modes from EDID.
>
> Removed hardcoding of bridge init sequence. With this patchset bridge driver now
> will program the init sequence based on the current mode set by drm framework.
>
> Current patchset is not tested on actual bridge chip/panel.
>
> Sandeep Panda (4):
> drm/bridge: add support for sn65dsi86 bridge driver
> dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings
> drm/panel: add Innolux TV123WAM eDP panel driver
> dt-bindings: Add Innolux TV123WAM panel bindings
>
> .../bindings/display/bridge/ti,sn65dsi86.txt | 60 ++
> .../display/panel/innolux,edp-2k-panel.txt | 21 +
> drivers/gpu/drm/bridge/ti-sn65dsi86.c | 742 +++++++++++++++++++++
> drivers/gpu/drm/panel/panel-innolux-tv123wam.c | 299 +++++++++
> 4 files changed, 1122 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
> create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi86.c
> create mode 100644 drivers/gpu/drm/panel/panel-innolux-tv123wam.c
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
--
Sean Paul, Software Engineer, Google / Chromium OS
More information about the Freedreno
mailing list