[Freedreno] [[RFC]DPU PATCH 0/4] Add suppport for sn65dsi86 bridge chip and Innolux 2k edp panel driver

[Sandeep Panda]

Changelog:

v4:
 - Current patchset separates out eDP panel specific resources from sn65dsi86
   bridge driver and creates a separate driver for the innloux edp panel.

 - Removed the unnecessary header files and variables used in driver.

 - Replaced irq_gpio as "interrupts" property in dt-bindings.

 - Use of regmap interface for i2c transactions in bridge driver.

 - Changed the edp panel driver prefixes from "panel_edp_2k "to "innloux_edp_2k"
  
 - Current patches are not tested on actual bridge chip/panel.

 - Updated Copyright and License.

 - Need to conclude on, if we need to the programming of edp panel video timeings
   in mode_set().

Sandeep Panda (4):
  drm/bridge: add support for sn65dsi86 bridge driver
  dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings
  drm/panel: add Innolux TV123WAM eDP panel driver
  dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings

 .../bindings/display/bridge/ti,sn65dsi86.txt       |  61 ++
 .../display/panel/innolux,edp-2k-panel.txt         |  21 +
 drivers/gpu/drm/bridge/ti-sn65dsi86.c              | 690 +++++++++++++++++++++
 drivers/gpu/drm/panel/panel-innolux-tv123wam.c     | 293 +++++++++
 4 files changed, 1065 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
 create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi86.c
 create mode 100644 drivers/gpu/drm/panel/panel-innolux-tv123wam.c

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project