[Freedreno] [[RFC]DPU PATCH 4/4] dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings

[Sandeep Panda]

The Innolux TV123WAM is a 12.3" eDP display panel
with 2160x1440 resolution.

Signed-off-by: Sandeep Panda <spanda at codeaurora.org>
---
 .../bindings/display/panel/innolux,edp-2k-panel.txt | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt b/Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
new file mode 100644
index 0000000..19f271c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
@@ -0,0 +1,21 @@
+Innolux TV123WAM 12.3 inch eDP display panel
+
+Required properties:
+- power-supply: regulator to provide the supply voltage
+- enable-gpios: GPIO pin to enable or disable the panel
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	edp_panel: edp_panel {
+		compatible = "innolux, edp_2k_panel";
+		reg = <0>;
+
+		enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+
+		power-supply = <&pm8916_l8>;
+
+		backlight = <&backlight>;
+	};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project