[Freedreno] [[RFC]DPU PATCH 3/4] drm/panel: add Innolux TV123WAM eDP panel driver

[spanda at codeaurora.org]

On 2018-04-21 01:13, Sean Paul wrote:
> On Thu, Apr 19, 2018 at 11:26:07PM +0530, Sandeep Panda wrote:
>> Add support for Innolux TV123WAM 12.3" panel which
>> is an eDP panel.
> 
> It seems like you could just use the panel-simple driver, no? Given 
> that this
> driver doesn't have any power timing, that will probably work better 
> since the
> warranty won't be voided :)

While going through the simple panel driver first saw couple of calls to 
mipi_dsi
APIs, and since this panel is an eDP panel so decided to make a new 
driver instead.
But it looks like we can reuse simple-panel for this edp panel also. 
Will use simple-panel driver in next patch.
> 
> Sean
> 
>> 
>> Signed-off-by: Sandeep Panda <spanda at codeaurora.org>
>> ---
>>  drivers/gpu/drm/panel/panel-innolux-tv123wam.c | 293 
>> +++++++++++++++++++++++++
>>  1 file changed, 293 insertions(+)
>>  create mode 100644 drivers/gpu/drm/panel/panel-innolux-tv123wam.c
>> 
>> diff --git a/drivers/gpu/drm/panel/panel-innolux-tv123wam.c 
>> b/drivers/gpu/drm/panel/panel-innolux-tv123wam.c
>> new file mode 100644
>> index 0000000..5632b02
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-innolux-tv123wam.c
>> @@ -0,0 +1,293 @@
>> +/*
>> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <drm/drmP.h>
>> +#include <drm/drm_panel.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regulator/consumer.h>
>> +
>> +struct innolux_edp_2k_panel_desc {
>> +	const struct drm_display_mode *modes;
>> +	unsigned int num_modes;
>> +	u32 bpc;
>> +	u32 bus_flags;
>> +};
>> +
>> +struct innolux_edp_2k_panel {
>> +	struct drm_panel base;
>> +	bool enabled;
>> +	bool prepared;
>> +	const struct innolux_edp_2k_panel_desc *desc;
>> +	struct regulator *supply;
>> +	struct gpio_desc *enable_gpio;
>> +	struct backlight_device *backlight;
>> +};
>> +
>> +static const struct drm_display_mode innolux_edp_2k_mode = {
>> +	.clock = 206016,
>> +	.hdisplay = 2160,
>> +	.hsync_start = 2160 + 48,
>> +	.hsync_end = 2160 + 48 + 32,
>> +	.htotal = 2160 + 48 + 32 + 80,
>> +	.vdisplay = 1440,
>> +	.vsync_start = 1440 + 3,
>> +	.vsync_end = 1440 + 3 + 10,
>> +	.vtotal = 1440 + 3 + 10 + 27,
>> +	.vrefresh = 60,
>> +	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
>> +};
>> +
>> +static const struct innolux_edp_2k_panel_desc innolux_edp_2k = {
>> +	.modes = &innolux_edp_2k_mode,
>> +	.num_modes = 1,
>> +	.bpc = 8,
>> +	.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
>> +};
>> +
>> +static const struct of_device_id platform_of_match[] = {
>> +	{
>> +		.compatible = "innolux, edp_2k_panel",
>> +		.data = &innolux_edp_2k,
>> +	},
>> +};
>> +
>> +static inline struct innolux_edp_2k_panel *
>> +to_innolux_edp_2k_panel(struct drm_panel *panel)
>> +{
>> +	return container_of(panel, struct innolux_edp_2k_panel, base);
>> +}
>> +
>> +static int innolux_edp_2k_panel_disable(struct drm_panel *panel)
>> +{
>> +	struct innolux_edp_2k_panel *pdata = to_innolux_edp_2k_panel(panel);
>> +
>> +	if (!pdata->enabled)
>> +		return 0;
>> +
>> +	if (pdata->backlight) {
>> +		pdata->backlight->props.power = FB_BLANK_POWERDOWN;
>> +		pdata->backlight->props.state |= BL_CORE_FBBLANK;
>> +		backlight_update_status(pdata->backlight);
>> +	}
>> +
>> +	pdata->enabled = false;
>> +
>> +	return 0;
>> +}
>> +
>> +static int innolux_edp_2k_panel_unprepare(struct drm_panel *panel)
>> +{
>> +	struct innolux_edp_2k_panel *pdata = to_innolux_edp_2k_panel(panel);
>> +
>> +	if (!pdata->prepared)
>> +		return 0;
>> +
>> +	if (pdata->enable_gpio)
>> +		gpiod_set_value_cansleep(pdata->enable_gpio, 0);
>> +
>> +	regulator_disable(pdata->supply);
>> +
>> +	pdata->prepared = false;
>> +
>> +	return 0;
>> +}
>> +
>> +static int innolux_edp_2k_panel_prepare(struct drm_panel *panel)
>> +{
>> +	struct innolux_edp_2k_panel *pdata = to_innolux_edp_2k_panel(panel);
>> +	int ret;
>> +
>> +	if (pdata->prepared)
>> +		return 0;
>> +
>> +	ret = regulator_enable(pdata->supply);
>> +	if (ret < 0) {
>> +		dev_err(panel->dev, "failed to enable supply: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	if (pdata->enable_gpio)
>> +		gpiod_set_value_cansleep(pdata->enable_gpio, 1);
>> +
>> +	pdata->prepared = true;
>> +
>> +	return 0;
>> +}
>> +
>> +static int innolux_edp_2k_panel_enable(struct drm_panel *panel)
>> +{
>> +	struct innolux_edp_2k_panel *pdata = to_innolux_edp_2k_panel(panel);
>> +
>> +	if (pdata->enabled)
>> +		return 0;
>> +
>> +	if (pdata->backlight) {
>> +		pdata->backlight->props.state &= ~BL_CORE_FBBLANK;
>> +		pdata->backlight->props.power = FB_BLANK_UNBLANK;
>> +		backlight_update_status(pdata->backlight);
>> +	}
>> +
>> +	pdata->enabled = true;
>> +
>> +	return 0;
>> +}
>> +
>> +static int innolux_edp_2k_panel_get_modes(struct drm_panel *panel)
>> +{
>> +	struct innolux_edp_2k_panel *pdata = to_innolux_edp_2k_panel(panel);
>> +	struct drm_connector *connector = pdata->base.connector;
>> +	struct drm_device *drm = pdata->base.drm;
>> +	struct drm_display_mode *mode;
>> +	unsigned int i, num = 0;
>> +
>> +	if (!pdata->desc || !connector || !drm)
>> +		return 0;
>> +
>> +	for (i = 0; i < pdata->desc->num_modes; i++) {
>> +		const struct drm_display_mode *m = &pdata->desc->modes[i];
>> +
>> +		mode = drm_mode_duplicate(drm, m);
>> +		if (!mode) {
>> +			dev_err(drm->dev, "failed to add mode %ux%u@%u\n",
>> +				m->hdisplay, m->vdisplay, m->vrefresh);
>> +			continue;
>> +		}
>> +
>> +		mode->type |= DRM_MODE_TYPE_DRIVER;
>> +
>> +		if (pdata->desc->num_modes == 1)
>> +			mode->type |= DRM_MODE_TYPE_PREFERRED;
>> +
>> +		drm_mode_set_name(mode);
>> +
>> +		drm_mode_probed_add(connector, mode);
>> +		num++;
>> +	}
>> +
>> +	connector->display_info.bpc = pdata->desc->bpc;
>> +	connector->display_info.bus_flags = pdata->desc->bus_flags;
>> +
>> +	return num;
>> +}
>> +
>> +static const struct drm_panel_funcs innolux_edp_2k_panel_funcs = {
>> +	.disable = innolux_edp_2k_panel_disable,
>> +	.unprepare = innolux_edp_2k_panel_unprepare,
>> +	.prepare = innolux_edp_2k_panel_prepare,
>> +	.enable = innolux_edp_2k_panel_enable,
>> +	.get_modes = innolux_edp_2k_panel_get_modes,
>> +};
>> +
>> +static int innolux_edp_2k_panel_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	const struct of_device_id *id;
>> +	struct device_node *backlight;
>> +	struct innolux_edp_2k_panel *pdata;
>> +	int ret;
>> +
>> +	id = of_match_node(platform_of_match, pdev->dev.of_node);
>> +	if (!id)
>> +		return -ENODEV;
>> +
>> +	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
>> +	if (!pdata)
>> +		return -ENOMEM;
>> +
>> +	pdata->enabled = false;
>> +	pdata->prepared = false;
>> +	pdata->desc = id->data;
>> +
>> +	pdata->supply = devm_regulator_get(dev, "power");
>> +	if (IS_ERR(pdata->supply))
>> +		return PTR_ERR(pdata->supply);
>> +
>> +	pdata->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
>> +	if (IS_ERR(pdata->enable_gpio))
>> +		return PTR_ERR(pdata->enable_gpio);
>> +
>> +	backlight = of_parse_phandle(dev->of_node, "backlight", 0);
>> +	if (backlight) {
>> +		pdata->backlight = of_find_backlight_by_node(backlight);
>> +		of_node_put(backlight);
>> +
>> +		if (!pdata->backlight)
>> +			return -EPROBE_DEFER;
>> +	}
>> +
>> +	drm_panel_init(&pdata->base);
>> +	pdata->base.dev = dev;
>> +	pdata->base.funcs = &innolux_edp_2k_panel_funcs;
>> +
>> +	ret = drm_panel_add(&pdata->base);
>> +	if (ret < 0)
>> +		goto free_backlight;
>> +
>> +	dev_set_drvdata(dev, pdata);
>> +
>> +	return 0;
>> +
>> +free_backlight:
>> +	if (pdata->backlight)
>> +		put_device(&pdata->backlight->dev);
>> +
>> +	return ret;
>> +}
>> +
>> +static int innolux_edp_2k_panel_remove(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct innolux_edp_2k_panel *pdata = dev_get_drvdata(dev);
>> +
>> +	drm_panel_detach(&pdata->base);
>> +	drm_panel_remove(&pdata->base);
>> +
>> +	innolux_edp_2k_panel_disable(&pdata->base);
>> +	innolux_edp_2k_panel_unprepare(&pdata->base);
>> +
>> +	if (pdata->backlight)
>> +		put_device(&pdata->backlight->dev);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct platform_driver innolux_edp_2k_panel_driver = {
>> +	.driver = {
>> +		.name = "innolux-2k-edp-panel",
>> +		.of_match_table = platform_of_match,
>> +	},
>> +	.probe = innolux_edp_2k_panel_probe,
>> +	.remove = innolux_edp_2k_panel_remove,
>> +};
>> +
>> +static int __init innolux_edp_2k_panel_init(void)
>> +{
>> +	int ret;
>> +
>> +	ret = platform_driver_register(&innolux_edp_2k_panel_driver);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	return 0;
>> +}
>> +module_init(innolux_edp_2k_panel_init);
>> +
>> +static void __exit innolux_edp_2k_panel_exit(void)
>> +{
>> +	platform_driver_unregister(&innolux_edp_2k_panel_driver);
>> +}
>> +module_exit(innolux_edp_2k_panel_exit);
>> +
>> +MODULE_DESCRIPTION("Innolux 2k eDP panel driver");
>> +MODULE_LICENSE("GPL");
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
>>