[Freedreno] [[RFC]DPU PATCH 2/4] dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings

[Rob Clark]

On Wed, Apr 25, 2018 at 7:45 PM, Stephen Boyd <swboyd at chromium.org> wrote:
> Quoting Sandeep Panda (2018-04-19 10:56:06)
>> Document the bindings used for the sn65dsi86 DSI to eDP bridge.
>>
>> Changes in v1:
>>  - Rephrase the dt-binding descriptions to be more inline with existing
>>    bindings (Andrzej Hajda).
>>  - Add missing dt-binding that are parsed by corresponding driver
>>    (Andrzej Hajda).
>>
>> Changes in v2:
>>  - Removed edp panel specific dt-binding entries. Only keep bridge
>>    specific entries (Sean Paul).
>>  - Remove custom-modes dt entry since its usage is removed from driver also (Sean Paul).
>>  - Remove is-pluggable dt entry since this will not be needed anymore (Sean Paul).
>>
>> Changes in v3:
>>  - Removed irq-gpio dt entry and instead populate is an interrupt
>>    property (Rob Herring).
>
> These changelogs usually go below the triple dash, but maybe drm is
> different and wants them?

yeah, drm generally wants them in the commit msg rather than below the
triple-dash, although I guess for bindings docs it should follow the
rules for that tree.. I usually just fix up these sort of things as I
apply patches, but not sure what other maintainers prefer

BR,
-R

>>
>> Signed-off-by: Sandeep Panda <spanda at codeaurora.org>
>> ---
>>  .../bindings/display/bridge/ti,sn65dsi86.txt       | 61 ++++++++++++++++++++++
>>  1 file changed, 61 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
>> new file mode 100644
>> index 0000000..412c4a2
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
>> @@ -0,0 +1,61 @@
>> +SN65DSI86 DSI to eDP bridge chip
>> +--------------------------------
>> +
>> +This is the binding for Texas Instruments SN65DSI86 bridge.
>
> Can you add a link to the datasheet here please?
>
>> +
>> +Required properties:
>> +- compatible: Must be "ti,sn65dsi86"
>> +- reg: i2c address of the chip, 0x2d as per datasheet
>> +- enable-gpios: OF device-tree gpio specifications for bridge_en pin
>> +
>> +- vccio-supply: A 1.8V supply that powers up the digital IOs.
>> +- vcca-supply: A 1.2V supply that powers up the analog circuits.
>
> Can you add vpll and vcc from the datasheet as well?
>
> Also refclk would be good to have just in case it's present (so
> optional?), and hpd should be another gpio property (could be optional I
> suppose).
>
> It also looks like this chip has a gpio controller on it, so it would
> need to have a gpio-controller property and #gpio-cells. And one of
> those GPIOs does PWM, so it would need #pwm-cells as well. I'm not
> saying the code needs to be written yet, but at least the binding would
> need to specify these things.