[Freedreno] [PATCH v2 2/3] drm/msm/a6xx: Use rev to identify SKU

[Rob Clark]

On Thu, Jul 29, 2021 at 7:33 AM Akhil P Oommen <akhilpo at codeaurora.org> wrote:
>
> Use rev instead of revn to identify the SKU. This is in
> preparation to the introduction of 7c3 gpu which won't have a
> revn.
>
> Signed-off-by: Akhil P Oommen <akhilpo at codeaurora.org>
> ---
>
> (no changes since v1)
>
>  drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index 183b9f9..0da1a66 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -1675,11 +1675,11 @@ static u32 a618_get_speed_bin(u32 fuse)
>         return UINT_MAX;
>  }
>
> -static u32 fuse_to_supp_hw(struct device *dev, u32 revn, u32 fuse)
> +static u32 fuse_to_supp_hw(struct device *dev, struct adreno_rev rev, u32 fuse)
>  {
>         u32 val = UINT_MAX;
>
> -       if (revn == 618)
> +       if (adreno_cmp_rev(ADRENO_REV(6, 1, 8, ANY_ID), rev))

Looks like adreno_cmp_rev() ended up in patch 3/3 when it should have
been in this patch..

But I guess we could also move this into adreno_is_a618() and use that here

BR,
-R

>                 val = a618_get_speed_bin(fuse);
>
>         if (val == UINT_MAX) {
> @@ -1692,8 +1692,7 @@ static u32 fuse_to_supp_hw(struct device *dev, u32 revn, u32 fuse)
>         return (1 << val);
>  }
>
> -static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu,
> -               u32 revn)
> +static int a6xx_set_supported_hw(struct device *dev, struct adreno_rev rev)
>  {
>         u32 supp_hw = UINT_MAX;
>         u16 speedbin;
> @@ -1714,7 +1713,7 @@ static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu,
>         }
>         speedbin = le16_to_cpu(speedbin);
>
> -       supp_hw = fuse_to_supp_hw(dev, revn, speedbin);
> +       supp_hw = fuse_to_supp_hw(dev, rev, speedbin);
>
>  done:
>         ret = devm_pm_opp_set_supported_hw(dev, &supp_hw, 1);
> @@ -1785,7 +1784,7 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev)
>
>         a6xx_llc_slices_init(pdev, a6xx_gpu);
>
> -       ret = a6xx_set_supported_hw(&pdev->dev, a6xx_gpu, info->revn);
> +       ret = a6xx_set_supported_hw(&pdev->dev, config->rev);
>         if (ret) {
>                 a6xx_destroy(&(a6xx_gpu->base.base));
>                 return ERR_PTR(ret);
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation.
>