[Freedreno] [PATCH v2 2/3] drm/msm/a6xx: Use rev to identify SKU
Akhil P Oommen
akhilpo at codeaurora.org
Thu Jul 29 15:35:56 UTC 2021
On 7/29/2021 8:57 PM, Rob Clark wrote:
> On Thu, Jul 29, 2021 at 7:33 AM Akhil P Oommen <akhilpo at codeaurora.org> wrote:
>>
>> Use rev instead of revn to identify the SKU. This is in
>> preparation to the introduction of 7c3 gpu which won't have a
>> revn.
>>
>> Signed-off-by: Akhil P Oommen <akhilpo at codeaurora.org>
>> ---
>>
>> (no changes since v1)
>>
>> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 11 +++++------
>> 1 file changed, 5 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> index 183b9f9..0da1a66 100644
>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> @@ -1675,11 +1675,11 @@ static u32 a618_get_speed_bin(u32 fuse)
>> return UINT_MAX;
>> }
>>
>> -static u32 fuse_to_supp_hw(struct device *dev, u32 revn, u32 fuse)
>> +static u32 fuse_to_supp_hw(struct device *dev, struct adreno_rev rev, u32 fuse)
>> {
>> u32 val = UINT_MAX;
>>
>> - if (revn == 618)
>> + if (adreno_cmp_rev(ADRENO_REV(6, 1, 8, ANY_ID), rev))
>
> Looks like adreno_cmp_rev() ended up in patch 3/3 when it should have
> been in this patch..
>
> But I guess we could also move this into adreno_is_a618() and use that here
>
> BR,
> -R
Ahh! I reordered the patches. This is too early in the probe sequence to
call adreno_is_axxx(), right?
-Akhil.
>
>> val = a618_get_speed_bin(fuse);
>>
>> if (val == UINT_MAX) {
>> @@ -1692,8 +1692,7 @@ static u32 fuse_to_supp_hw(struct device *dev, u32 revn, u32 fuse)
>> return (1 << val);
>> }
>>
>> -static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu,
>> - u32 revn)
>> +static int a6xx_set_supported_hw(struct device *dev, struct adreno_rev rev)
>> {
>> u32 supp_hw = UINT_MAX;
>> u16 speedbin;
>> @@ -1714,7 +1713,7 @@ static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu,
>> }
>> speedbin = le16_to_cpu(speedbin);
>>
>> - supp_hw = fuse_to_supp_hw(dev, revn, speedbin);
>> + supp_hw = fuse_to_supp_hw(dev, rev, speedbin);
>>
>> done:
>> ret = devm_pm_opp_set_supported_hw(dev, &supp_hw, 1);
>> @@ -1785,7 +1784,7 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev)
>>
>> a6xx_llc_slices_init(pdev, a6xx_gpu);
>>
>> - ret = a6xx_set_supported_hw(&pdev->dev, a6xx_gpu, info->revn);
>> + ret = a6xx_set_supported_hw(&pdev->dev, config->rev);
>> if (ret) {
>> a6xx_destroy(&(a6xx_gpu->base.base));
>> return ERR_PTR(ret);
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
>> of Code Aurora Forum, hosted by The Linux Foundation.
>>
More information about the Freedreno
mailing list