[Freedreno] [PATCH v3 23/25] drm/msm/dsi: remove temp data from global pll structure
abhinavk at codeaurora.org
abhinavk at codeaurora.org
Tue Mar 30 03:26:19 UTC 2021
On 2021-03-27 04:03, Dmitry Baryshkov wrote:
> The 7nm, 10nm and 14nm drivers would store interim data used during
> VCO/PLL rate setting in the global dsi_pll_Nnm structure. Move this
> data
> structures to the onstack storage. While we are at it, drop
> unused/static 'config' data, unused config fields, etc.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk at codeaurora.org>
> ---
> drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 167 ++++-------
> drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 334 +++++++--------------
> drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 166 ++++------
> 3 files changed, 220 insertions(+), 447 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> index b937e77b3c37..1fbb54f4df98 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> @@ -36,43 +36,25 @@
> */
>
> #define VCO_REF_CLK_RATE 19200000
> -
> -struct dsi_pll_regs {
> - u32 pll_prop_gain_rate;
> - u32 pll_lockdet_rate;
> - u32 decimal_div_start;
> - u32 frac_div_start_low;
> - u32 frac_div_start_mid;
> - u32 frac_div_start_high;
> - u32 pll_clock_inverters;
> - u32 ssc_stepsize_low;
> - u32 ssc_stepsize_high;
> - u32 ssc_div_per_low;
> - u32 ssc_div_per_high;
> - u32 ssc_adjper_low;
> - u32 ssc_adjper_high;
> - u32 ssc_control;
> -};
> +#define FRAC_BITS 18
>
> /* v3.0.0 10nm implementation that requires the old timings settings
> */
> #define DSI_PHY_10NM_QUIRK_OLD_TIMINGS BIT(0)
>
> struct dsi_pll_config {
> - u32 ref_freq;
> - bool div_override;
> - u32 output_div;
> - bool ignore_frac;
> - bool disable_prescaler;
> bool enable_ssc;
> bool ssc_center;
> - u32 dec_bits;
> - u32 frac_bits;
> - u32 lock_timer;
> u32 ssc_freq;
> u32 ssc_offset;
> u32 ssc_adj_per;
> - u32 thresh_cycles;
> - u32 refclk_cycles;
> +
> + /* out */
> + u32 pll_prop_gain_rate;
> + u32 decimal_div_start;
> + u32 frac_div_start;
> + u32 pll_clock_inverters;
> + u32 ssc_stepsize;
> + u32 ssc_div_per;
> };
>
> struct pll_10nm_cached_state {
> @@ -88,15 +70,11 @@ struct dsi_pll_10nm {
>
> struct msm_dsi_phy *phy;
>
> - u64 vco_ref_clk_rate;
> u64 vco_current_rate;
>
> /* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */
> spinlock_t postdiv_lock;
>
> - struct dsi_pll_config pll_configuration;
> - struct dsi_pll_regs reg_setup;
> -
> struct pll_10nm_cached_state cached_state;
>
> struct dsi_pll_10nm *slave;
> @@ -110,34 +88,19 @@ struct dsi_pll_10nm {
> */
> static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX];
>
> -static void dsi_pll_setup_config(struct dsi_pll_10nm *pll)
> +static void dsi_pll_setup_config(struct dsi_pll_config *config)
> {
> - struct dsi_pll_config *config = &pll->pll_configuration;
> -
> - config->ref_freq = pll->vco_ref_clk_rate;
> - config->output_div = 1;
> - config->dec_bits = 8;
> - config->frac_bits = 18;
> - config->lock_timer = 64;
> config->ssc_freq = 31500;
> config->ssc_offset = 5000;
> config->ssc_adj_per = 2;
> - config->thresh_cycles = 32;
> - config->refclk_cycles = 256;
> -
> - config->div_override = false;
> - config->ignore_frac = false;
> - config->disable_prescaler = false;
>
> config->enable_ssc = false;
> - config->ssc_center = 0;
> + config->ssc_center = false;
> }
>
> -static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll)
> +static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll, struct
> dsi_pll_config *config)
> {
> - struct dsi_pll_config *config = &pll->pll_configuration;
> - struct dsi_pll_regs *regs = &pll->reg_setup;
> - u64 fref = pll->vco_ref_clk_rate;
> + u64 fref = VCO_REF_CLK_RATE;
> u64 pll_freq;
> u64 divider;
> u64 dec, dec_multiple;
> @@ -146,40 +109,32 @@ static void dsi_pll_calc_dec_frac(struct
> dsi_pll_10nm *pll)
>
> pll_freq = pll->vco_current_rate;
>
> - if (config->disable_prescaler)
> - divider = fref;
> - else
> - divider = fref * 2;
> + divider = fref * 2;
>
> - multiplier = 1 << config->frac_bits;
> + multiplier = 1 << FRAC_BITS;
> dec_multiple = div_u64(pll_freq * multiplier, divider);
> dec = div_u64_rem(dec_multiple, multiplier, &frac);
>
> if (pll_freq <= 1900000000UL)
> - regs->pll_prop_gain_rate = 8;
> + config->pll_prop_gain_rate = 8;
> else if (pll_freq <= 3000000000UL)
> - regs->pll_prop_gain_rate = 10;
> + config->pll_prop_gain_rate = 10;
> else
> - regs->pll_prop_gain_rate = 12;
> + config->pll_prop_gain_rate = 12;
> if (pll_freq < 1100000000UL)
> - regs->pll_clock_inverters = 8;
> + config->pll_clock_inverters = 8;
> else
> - regs->pll_clock_inverters = 0;
> + config->pll_clock_inverters = 0;
>
> - regs->pll_lockdet_rate = config->lock_timer;
> - regs->decimal_div_start = dec;
> - regs->frac_div_start_low = (frac & 0xff);
> - regs->frac_div_start_mid = (frac & 0xff00) >> 8;
> - regs->frac_div_start_high = (frac & 0x30000) >> 16;
> + config->decimal_div_start = dec;
> + config->frac_div_start = frac;
> }
>
> #define SSC_CENTER BIT(0)
> #define SSC_EN BIT(1)
>
> -static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll)
> +static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll, struct
> dsi_pll_config *config)
> {
> - struct dsi_pll_config *config = &pll->pll_configuration;
> - struct dsi_pll_regs *regs = &pll->reg_setup;
> u32 ssc_per;
> u32 ssc_mod;
> u64 ssc_step_size;
> @@ -190,58 +145,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_10nm
> *pll)
> return;
> }
>
> - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 -
> 1;
> + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / 2 -
> 1;
> ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1);
> ssc_per -= ssc_mod;
>
> - frac = regs->frac_div_start_low |
> - (regs->frac_div_start_mid << 8) |
> - (regs->frac_div_start_high << 16);
> - ssc_step_size = regs->decimal_div_start;
> - ssc_step_size *= (1 << config->frac_bits);
> + frac = config->frac_div_start;
> + ssc_step_size = config->decimal_div_start;
> + ssc_step_size *= (1 << FRAC_BITS);
> ssc_step_size += frac;
> ssc_step_size *= config->ssc_offset;
> ssc_step_size *= (config->ssc_adj_per + 1);
> ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1));
> ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000);
>
> - regs->ssc_div_per_low = ssc_per & 0xFF;
> - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8;
> - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF);
> - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8);
> - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF;
> - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8;
> -
> - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0;
> + config->ssc_div_per = ssc_per;
> + config->ssc_stepsize = ssc_step_size;
>
> pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n",
> - regs->decimal_div_start, frac, config->frac_bits);
> + config->decimal_div_start, frac, FRAC_BITS);
> pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n",
> ssc_per, (u32)ssc_step_size, config->ssc_adj_per);
> }
>
> -static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll)
> +static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll, struct
> dsi_pll_config *config)
> {
> void __iomem *base = pll->phy->pll_base;
> - struct dsi_pll_regs *regs = &pll->reg_setup;
>
> - if (pll->pll_configuration.enable_ssc) {
> + if (config->enable_ssc) {
> pr_debug("SSC is enabled\n");
>
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1,
> - regs->ssc_stepsize_low);
> + config->ssc_stepsize & 0xff);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1,
> - regs->ssc_stepsize_high);
> + config->ssc_stepsize >> 8);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1,
> - regs->ssc_div_per_low);
> + config->ssc_div_per & 0xff);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1,
> - regs->ssc_div_per_high);
> + config->ssc_div_per >> 8);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1,
> - regs->ssc_adjper_low);
> + config->ssc_adj_per & 0xff);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1,
> - regs->ssc_adjper_high);
> + config->ssc_adj_per >> 8);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL,
> - SSC_EN | regs->ssc_control);
> + SSC_EN | (config->ssc_center ? SSC_CENTER : 0));
> }
> }
>
> @@ -271,50 +217,48 @@ static void dsi_pll_config_hzindep_reg(struct
> dsi_pll_10nm *pll)
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f);
> }
>
> -static void dsi_pll_commit(struct dsi_pll_10nm *pll)
> +static void dsi_pll_commit(struct dsi_pll_10nm *pll, struct
> dsi_pll_config *config)
> {
> void __iomem *base = pll->phy->pll_base;
> - struct dsi_pll_regs *reg = &pll->reg_setup;
>
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1,
> - reg->decimal_div_start);
> + config->decimal_div_start);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1,
> - reg->frac_div_start_low);
> + config->frac_div_start & 0xff);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1,
> - reg->frac_div_start_mid);
> + (config->frac_div_start & 0xff00) >> 8);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1,
> - reg->frac_div_start_high);
> - dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1,
> - reg->pll_lockdet_rate);
> + (config->frac_div_start & 0x30000) >> 16);
> + dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, 64);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10);
> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS,
> - reg->pll_clock_inverters);
> + config->pll_clock_inverters);
> }
>
> static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long
> rate,
> unsigned long parent_rate)
> {
> struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw);
> + struct dsi_pll_config config;
>
> DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->phy->id, rate,
> parent_rate);
>
> pll_10nm->vco_current_rate = rate;
> - pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
>
> - dsi_pll_setup_config(pll_10nm);
> + dsi_pll_setup_config(&config);
>
> - dsi_pll_calc_dec_frac(pll_10nm);
> + dsi_pll_calc_dec_frac(pll_10nm, &config);
>
> - dsi_pll_calc_ssc(pll_10nm);
> + dsi_pll_calc_ssc(pll_10nm, &config);
>
> - dsi_pll_commit(pll_10nm);
> + dsi_pll_commit(pll_10nm, &config);
>
> dsi_pll_config_hzindep_reg(pll_10nm);
>
> - dsi_pll_ssc_commit(pll_10nm);
> + dsi_pll_ssc_commit(pll_10nm, &config);
>
> /* flush, ensure all register writes are done*/
> wmb();
> @@ -461,9 +405,8 @@ static unsigned long
> dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> {
> struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw);
> - struct dsi_pll_config *config = &pll_10nm->pll_configuration;
> void __iomem *base = pll_10nm->phy->pll_base;
> - u64 ref_clk = pll_10nm->vco_ref_clk_rate;
> + u64 ref_clk = VCO_REF_CLK_RATE;
> u64 vco_rate = 0x0;
> u64 multiplier;
> u32 frac;
> @@ -483,7 +426,7 @@ static unsigned long
> dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw,
> * TODO:
> * 1. Assumes prescaler is disabled
> */
> - multiplier = 1 << config->frac_bits;
> + multiplier = 1 << FRAC_BITS;
> pll_freq = dec * (ref_clk * 2);
> tmp64 = (ref_clk * 2 * frac);
> pll_freq += div_u64(tmp64, multiplier);
> @@ -565,7 +508,7 @@ static int dsi_10nm_restore_state(struct
> msm_dsi_phy *phy)
> val |= cached->pll_mux;
> dsi_phy_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val);
>
> - ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw,
> pll_10nm->vco_current_rate, pll_10nm->vco_ref_clk_rate);
> + ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw,
> pll_10nm->vco_current_rate, VCO_REF_CLK_RATE);
> if (ret) {
> DRM_DEV_ERROR(&pll_10nm->phy->pdev->dev,
> "restore vco rate failed. ret=%d\n", ret);
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> index 8b4865c5796d..d08ad0c632b4 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> @@ -37,51 +37,19 @@
> #define VCO_MIN_RATE 1300000000UL
> #define VCO_MAX_RATE 2600000000UL
>
> -#define DSI_PLL_DEFAULT_VCO_POSTDIV 1
> +struct dsi_pll_config {
> + u64 vco_current_rate;
>
> -struct dsi_pll_input {
> - u32 fref; /* reference clk */
> - u32 fdata; /* bit clock rate */
> - u32 dsiclk_sel; /* Mux configuration (see diagram) */
> u32 ssc_en; /* SSC enable/disable */
> - u32 ldo_en;
>
> /* fixed params */
> - u32 refclk_dbler_en;
> - u32 vco_measure_time;
> - u32 kvco_measure_time;
> - u32 bandgap_timer;
> - u32 pll_wakeup_timer;
> u32 plllock_cnt;
> - u32 plllock_rng;
> u32 ssc_center;
> u32 ssc_adj_period;
> u32 ssc_spread;
> u32 ssc_freq;
> - u32 pll_ie_trim;
> - u32 pll_ip_trim;
> - u32 pll_iptat_trim;
> - u32 pll_cpcset_cur;
> - u32 pll_cpmset_cur;
> -
> - u32 pll_icpmset;
> - u32 pll_icpcset;
> -
> - u32 pll_icpmset_p;
> - u32 pll_icpmset_m;
> -
> - u32 pll_icpcset_p;
> - u32 pll_icpcset_m;
> -
> - u32 pll_lpf_res1;
> - u32 pll_lpf_cap1;
> - u32 pll_lpf_cap2;
> - u32 pll_c3ctrl;
> - u32 pll_r3ctrl;
> -};
>
> -struct dsi_pll_output {
> - u32 pll_txclk_en;
> + /* calculated */
> u32 dec_start;
> u32 div_frac_start;
> u32 ssc_period;
> @@ -91,19 +59,6 @@ struct dsi_pll_output {
> u32 pll_vco_count;
> u32 pll_kvco_div_ref;
> u32 pll_kvco_count;
> - u32 pll_misc1;
> - u32 pll_lpf2_postdiv;
> - u32 pll_resetsm_cntrl;
> - u32 pll_resetsm_cntrl2;
> - u32 pll_resetsm_cntrl5;
> - u32 pll_kvco_code;
> -
> - u32 cmn_clk_cfg0;
> - u32 cmn_clk_cfg1;
> - u32 cmn_ldo_cntrl;
> -
> - u32 pll_postdiv;
> - u32 fcvo;
> };
>
> struct pll_14nm_cached_state {
> @@ -117,15 +72,9 @@ struct dsi_pll_14nm {
>
> struct msm_dsi_phy *phy;
>
> - struct dsi_pll_input in;
> - struct dsi_pll_output out;
> -
> /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */
> spinlock_t postdiv_lock;
>
> - u64 vco_current_rate;
> - u64 vco_ref_clk_rate;
> -
> struct pll_14nm_cached_state cached_state;
>
> struct dsi_pll_14nm *slave;
> @@ -195,78 +144,50 @@ static bool pll_14nm_poll_for_ready(struct
> dsi_pll_14nm *pll_14nm,
> return pll_locked;
> }
>
> -static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll)
> +static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf)
> {
> - pll->in.fref = pll->vco_ref_clk_rate;
> - pll->in.fdata = 0;
> - pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */
> - pll->in.ldo_en = 0; /* disabled for now */
> -
> /* fixed input */
> - pll->in.refclk_dbler_en = 0;
> - pll->in.vco_measure_time = 5;
> - pll->in.kvco_measure_time = 5;
> - pll->in.bandgap_timer = 4;
> - pll->in.pll_wakeup_timer = 5;
> - pll->in.plllock_cnt = 1;
> - pll->in.plllock_rng = 0;
> + pconf->plllock_cnt = 1;
>
> /*
> * SSC is enabled by default. We might need DT props for configuring
> * some SSC params like PPM and center/down spread etc.
> */
> - pll->in.ssc_en = 1;
> - pll->in.ssc_center = 0; /* down spread by default */
> - pll->in.ssc_spread = 5; /* PPM / 1000 */
> - pll->in.ssc_freq = 31500; /* default recommended */
> - pll->in.ssc_adj_period = 37;
> -
> - pll->in.pll_ie_trim = 4;
> - pll->in.pll_ip_trim = 4;
> - pll->in.pll_cpcset_cur = 1;
> - pll->in.pll_cpmset_cur = 1;
> - pll->in.pll_icpmset = 4;
> - pll->in.pll_icpcset = 4;
> - pll->in.pll_icpmset_p = 0;
> - pll->in.pll_icpmset_m = 0;
> - pll->in.pll_icpcset_p = 0;
> - pll->in.pll_icpcset_m = 0;
> - pll->in.pll_lpf_res1 = 3;
> - pll->in.pll_lpf_cap1 = 11;
> - pll->in.pll_lpf_cap2 = 1;
> - pll->in.pll_iptat_trim = 7;
> - pll->in.pll_c3ctrl = 2;
> - pll->in.pll_r3ctrl = 1;
> + pconf->ssc_en = 1;
> + pconf->ssc_center = 0; /* down spread by default */
> + pconf->ssc_spread = 5; /* PPM / 1000 */
> + pconf->ssc_freq = 31500; /* default recommended */
> + pconf->ssc_adj_period = 37;
> }
>
> #define CEIL(x, y) (((x) + ((y) - 1)) / (y))
>
> -static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll)
> +static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll, struct
> dsi_pll_config *pconf)
> {
> u32 period, ssc_period;
> u32 ref, rem;
> u64 step_size;
>
> - DBG("vco=%lld ref=%lld", pll->vco_current_rate,
> pll->vco_ref_clk_rate);
> + DBG("vco=%lld ref=%d", pconf->vco_current_rate, VCO_REF_CLK_RATE);
>
> - ssc_period = pll->in.ssc_freq / 500;
> - period = (u32)pll->vco_ref_clk_rate / 1000;
> + ssc_period = pconf->ssc_freq / 500;
> + period = (u32)VCO_REF_CLK_RATE / 1000;
> ssc_period = CEIL(period, ssc_period);
> ssc_period -= 1;
> - pll->out.ssc_period = ssc_period;
> + pconf->ssc_period = ssc_period;
>
> - DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq,
> - pll->in.ssc_spread, pll->out.ssc_period);
> + DBG("ssc freq=%d spread=%d period=%d", pconf->ssc_freq,
> + pconf->ssc_spread, pconf->ssc_period);
>
> - step_size = (u32)pll->vco_current_rate;
> - ref = pll->vco_ref_clk_rate;
> + step_size = (u32)pconf->vco_current_rate;
> + ref = VCO_REF_CLK_RATE;
> ref /= 1000;
> step_size = div_u64(step_size, ref);
> step_size <<= 20;
> step_size = div_u64(step_size, 1000);
> - step_size *= pll->in.ssc_spread;
> + step_size *= pconf->ssc_spread;
> step_size = div_u64(step_size, 1000);
> - step_size *= (pll->in.ssc_adj_period + 1);
> + step_size *= (pconf->ssc_adj_period + 1);
>
> rem = 0;
> step_size = div_u64_rem(step_size, ssc_period + 1, &rem);
> @@ -277,18 +198,16 @@ static void pll_14nm_ssc_calc(struct dsi_pll_14nm
> *pll)
>
> step_size &= 0x0ffff; /* take lower 16 bits */
>
> - pll->out.ssc_step_size = step_size;
> + pconf->ssc_step_size = step_size;
> }
>
> -static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll)
> +static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll, struct
> dsi_pll_config *pconf)
> {
> - struct dsi_pll_input *pin = &pll->in;
> - struct dsi_pll_output *pout = &pll->out;
> u64 multiplier = BIT(20);
> u64 dec_start_multiple, dec_start, pll_comp_val;
> u32 duration, div_frac_start;
> - u64 vco_clk_rate = pll->vco_current_rate;
> - u64 fref = pll->vco_ref_clk_rate;
> + u64 vco_clk_rate = pconf->vco_current_rate;
> + u64 fref = VCO_REF_CLK_RATE;
>
> DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref);
>
> @@ -297,14 +216,14 @@ static void pll_14nm_dec_frac_calc(struct
> dsi_pll_14nm *pll)
>
> dec_start = div_u64(dec_start_multiple, multiplier);
>
> - pout->dec_start = (u32)dec_start;
> - pout->div_frac_start = div_frac_start;
> + pconf->dec_start = (u32)dec_start;
> + pconf->div_frac_start = div_frac_start;
>
> - if (pin->plllock_cnt == 0)
> + if (pconf->plllock_cnt == 0)
> duration = 1024;
> - else if (pin->plllock_cnt == 1)
> + else if (pconf->plllock_cnt == 1)
> duration = 256;
> - else if (pin->plllock_cnt == 2)
> + else if (pconf->plllock_cnt == 2)
> duration = 128;
> else
> duration = 32;
> @@ -313,10 +232,7 @@ static void pll_14nm_dec_frac_calc(struct
> dsi_pll_14nm *pll)
> pll_comp_val = div_u64(pll_comp_val, multiplier);
> do_div(pll_comp_val, 10);
>
> - pout->plllock_cmp = (u32)pll_comp_val;
> -
> - pout->pll_txclk_en = 1;
> - pout->cmn_ldo_cntrl = 0x3c;
> + pconf->plllock_cmp = (u32)pll_comp_val;
> }
>
> static u32 pll_14nm_kvco_slop(u32 vrate)
> @@ -333,74 +249,66 @@ static u32 pll_14nm_kvco_slop(u32 vrate)
> return slop;
> }
>
> -static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll)
> +static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll, struct
> dsi_pll_config *pconf)
> {
> - struct dsi_pll_input *pin = &pll->in;
> - struct dsi_pll_output *pout = &pll->out;
> - u64 vco_clk_rate = pll->vco_current_rate;
> - u64 fref = pll->vco_ref_clk_rate;
> + u64 vco_clk_rate = pconf->vco_current_rate;
> + u64 fref = VCO_REF_CLK_RATE;
> + u32 vco_measure_time = 5;
> + u32 kvco_measure_time = 5;
> u64 data;
> u32 cnt;
>
> - data = fref * pin->vco_measure_time;
> + data = fref * vco_measure_time;
> do_div(data, 1000000);
> data &= 0x03ff; /* 10 bits */
> data -= 2;
> - pout->pll_vco_div_ref = data;
> + pconf->pll_vco_div_ref = data;
>
> data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */
> - data *= pin->vco_measure_time;
> + data *= vco_measure_time;
> do_div(data, 10);
> - pout->pll_vco_count = data;
> + pconf->pll_vco_count = data;
>
> - data = fref * pin->kvco_measure_time;
> + data = fref * kvco_measure_time;
> do_div(data, 1000000);
> data &= 0x03ff; /* 10 bits */
> data -= 1;
> - pout->pll_kvco_div_ref = data;
> + pconf->pll_kvco_div_ref = data;
>
> cnt = pll_14nm_kvco_slop(vco_clk_rate);
> cnt *= 2;
> cnt /= 100;
> - cnt *= pin->kvco_measure_time;
> - pout->pll_kvco_count = cnt;
> -
> - pout->pll_misc1 = 16;
> - pout->pll_resetsm_cntrl = 48;
> - pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3;
> - pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer;
> - pout->pll_kvco_code = 0;
> + cnt *= kvco_measure_time;
> + pconf->pll_kvco_count = cnt;
> }
>
> -static void pll_db_commit_ssc(struct dsi_pll_14nm *pll)
> +static void pll_db_commit_ssc(struct dsi_pll_14nm *pll, struct
> dsi_pll_config *pconf)
> {
> void __iomem *base = pll->phy->pll_base;
> - struct dsi_pll_input *pin = &pll->in;
> - struct dsi_pll_output *pout = &pll->out;
> u8 data;
>
> - data = pin->ssc_adj_period;
> + data = pconf->ssc_adj_period;
> data &= 0x0ff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data);
> - data = (pin->ssc_adj_period >> 8);
> + data = (pconf->ssc_adj_period >> 8);
> data &= 0x03;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data);
>
> - data = pout->ssc_period;
> + data = pconf->ssc_period;
> data &= 0x0ff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data);
> - data = (pout->ssc_period >> 8);
> + data = (pconf->ssc_period >> 8);
> data &= 0x0ff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data);
>
> - data = pout->ssc_step_size;
> + data = pconf->ssc_step_size;
> data &= 0x0ff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data);
> - data = (pout->ssc_step_size >> 8);
> + data = (pconf->ssc_step_size >> 8);
> data &= 0x0ff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data);
>
> - data = (pin->ssc_center & 0x01);
> + data = (pconf->ssc_center & 0x01);
> data <<= 1;
> data |= 0x01; /* enable */
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data);
> @@ -409,8 +317,7 @@ static void pll_db_commit_ssc(struct dsi_pll_14nm
> *pll)
> }
>
> static void pll_db_commit_common(struct dsi_pll_14nm *pll,
> - struct dsi_pll_input *pin,
> - struct dsi_pll_output *pout)
> + struct dsi_pll_config *pconf)
> {
> void __iomem *base = pll->phy->pll_base;
> u8 data;
> @@ -419,55 +326,41 @@ static void pll_db_commit_common(struct
> dsi_pll_14nm *pll,
> data = 0;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data);
>
> - data = pout->pll_txclk_en;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, 1);
>
> - data = pout->pll_resetsm_cntrl;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data);
> - data = pout->pll_resetsm_cntrl2;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data);
> - data = pout->pll_resetsm_cntrl5;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, 48);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, 4 << 3);
> /* bandgap_timer */
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, 5); /*
> pll_wakeup_timer */
>
> - data = pout->pll_vco_div_ref & 0xff;
> + data = pconf->pll_vco_div_ref & 0xff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data);
> - data = (pout->pll_vco_div_ref >> 8) & 0x3;
> + data = (pconf->pll_vco_div_ref >> 8) & 0x3;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data);
>
> - data = pout->pll_kvco_div_ref & 0xff;
> + data = pconf->pll_kvco_div_ref & 0xff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data);
> - data = (pout->pll_kvco_div_ref >> 8) & 0x3;
> + data = (pconf->pll_kvco_div_ref >> 8) & 0x3;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data);
>
> - data = pout->pll_misc1;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, 16);
>
> - data = pin->pll_ie_trim;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, 4);
>
> - data = pin->pll_ip_trim;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, 4);
>
> - data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, 1 << 3 | 1);
>
> - data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, 0 << 3 | 0);
>
> - data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, 0 << 3 | 0);
>
> - data = pin->pll_icpmset << 3 | pin->pll_icpcset;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, 4 << 3 | 4);
>
> - data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, 1 << 4 | 11);
>
> - data = pin->pll_iptat_trim;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, 7);
>
> - data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data);
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, 1 << 4 | 2);
> }
>
> static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm)
> @@ -488,8 +381,7 @@ static void pll_14nm_software_reset(struct
> dsi_pll_14nm *pll_14nm)
> }
>
> static void pll_db_commit_14nm(struct dsi_pll_14nm *pll,
> - struct dsi_pll_input *pin,
> - struct dsi_pll_output *pout)
> + struct dsi_pll_config *pconf)
> {
> void __iomem *base = pll->phy->pll_base;
> void __iomem *cmn_base = pll->phy->base;
> @@ -497,57 +389,64 @@ static void pll_db_commit_14nm(struct
> dsi_pll_14nm *pll,
>
> DBG("DSI%d PLL", pll->phy->id);
>
> - data = pout->cmn_ldo_cntrl;
> - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data);
> + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, 0x3c);
>
> - pll_db_commit_common(pll, pin, pout);
> + pll_db_commit_common(pll, pconf);
>
> pll_14nm_software_reset(pll);
>
> - data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */
> - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data);
> + /* Use the /2 path in Mux */
> + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, 1);
>
> data = 0xff; /* data, clk, pll normal operation */
> dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data);
>
> /* configure the frequency dependent pll registers */
> - data = pout->dec_start;
> + data = pconf->dec_start;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data);
>
> - data = pout->div_frac_start & 0xff;
> + data = pconf->div_frac_start & 0xff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data);
> - data = (pout->div_frac_start >> 8) & 0xff;
> + data = (pconf->div_frac_start >> 8) & 0xff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data);
> - data = (pout->div_frac_start >> 16) & 0xf;
> + data = (pconf->div_frac_start >> 16) & 0xf;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data);
>
> - data = pout->plllock_cmp & 0xff;
> + data = pconf->plllock_cmp & 0xff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data);
>
> - data = (pout->plllock_cmp >> 8) & 0xff;
> + data = (pconf->plllock_cmp >> 8) & 0xff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data);
>
> - data = (pout->plllock_cmp >> 16) & 0x3;
> + data = (pconf->plllock_cmp >> 16) & 0x3;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data);
>
> - data = pin->plllock_cnt << 1 | pin->plllock_rng << 3;
> + data = pconf->plllock_cnt << 1 | 0 << 3; /* plllock_rng */
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data);
>
> - data = pout->pll_vco_count & 0xff;
> + data = pconf->pll_vco_count & 0xff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data);
> - data = (pout->pll_vco_count >> 8) & 0xff;
> + data = (pconf->pll_vco_count >> 8) & 0xff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data);
>
> - data = pout->pll_kvco_count & 0xff;
> + data = pconf->pll_kvco_count & 0xff;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data);
> - data = (pout->pll_kvco_count >> 8) & 0x3;
> + data = (pconf->pll_kvco_count >> 8) & 0x3;
> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data);
>
> - data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1;
> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data);
> + /*
> + * High nibble configures the post divider internal to the VCO. It's
> + * fixed to divide by 1 for now.
> + *
> + * 0: divided by 1
> + * 1: divided by 2
> + * 2: divided by 4
> + * 3: divided by 8
> + */
> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, 0 << 4 |
> 3);
>
> - if (pin->ssc_en)
> - pll_db_commit_ssc(pll);
> + if (pconf->ssc_en)
> + pll_db_commit_ssc(pll, pconf);
>
> wmb(); /* make sure register committed */
> }
> @@ -559,35 +458,20 @@ static int dsi_pll_14nm_vco_set_rate(struct
> clk_hw *hw, unsigned long rate,
> unsigned long parent_rate)
> {
> struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
> - struct dsi_pll_input *pin = &pll_14nm->in;
> - struct dsi_pll_output *pout = &pll_14nm->out;
> + struct dsi_pll_config conf;
>
> DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->phy->id, rate,
> parent_rate);
>
> - pll_14nm->vco_current_rate = rate;
> - pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
> -
> - dsi_pll_14nm_input_init(pll_14nm);
> -
> - /*
> - * This configures the post divider internal to the VCO. It's
> - * fixed to divide by 1 for now.
> - *
> - * tx_band = pll_postdiv.
> - * 0: divided by 1
> - * 1: divided by 2
> - * 2: divided by 4
> - * 3: divided by 8
> - */
> - pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV;
> + dsi_pll_14nm_config_init(&conf);
> + conf.vco_current_rate = rate;
>
> - pll_14nm_dec_frac_calc(pll_14nm);
> + pll_14nm_dec_frac_calc(pll_14nm, &conf);
>
> - if (pin->ssc_en)
> - pll_14nm_ssc_calc(pll_14nm);
> + if (conf.ssc_en)
> + pll_14nm_ssc_calc(pll_14nm, &conf);
>
> - pll_14nm_calc_vco_count(pll_14nm);
> + pll_14nm_calc_vco_count(pll_14nm, &conf);
>
> /* commit the slave DSI PLL registers if we're master. Note that we
> * don't lock the slave PLL. We just ensure that the PLL/PHY
> registers
> @@ -596,10 +480,10 @@ static int dsi_pll_14nm_vco_set_rate(struct
> clk_hw *hw, unsigned long rate,
> if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) {
> struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
>
> - pll_db_commit_14nm(pll_14nm_slave, pin, pout);
> + pll_db_commit_14nm(pll_14nm_slave, &conf);
> }
>
> - pll_db_commit_14nm(pll_14nm, pin, pout);
> + pll_db_commit_14nm(pll_14nm, &conf);
>
> return 0;
> }
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> index 4df237ad0eaf..ce6ae2fba993 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> @@ -36,43 +36,24 @@
> */
>
> #define VCO_REF_CLK_RATE 19200000
> -
> -struct dsi_pll_regs {
> - u32 pll_prop_gain_rate;
> - u32 pll_lockdet_rate;
> - u32 decimal_div_start;
> - u32 frac_div_start_low;
> - u32 frac_div_start_mid;
> - u32 frac_div_start_high;
> - u32 pll_clock_inverters;
> - u32 ssc_stepsize_low;
> - u32 ssc_stepsize_high;
> - u32 ssc_div_per_low;
> - u32 ssc_div_per_high;
> - u32 ssc_adjper_low;
> - u32 ssc_adjper_high;
> - u32 ssc_control;
> -};
> +#define FRAC_BITS 18
>
> /* Hardware is V4.1 */
> #define DSI_PHY_7NM_QUIRK_V4_1 BIT(0)
>
> struct dsi_pll_config {
> - u32 ref_freq;
> - bool div_override;
> - u32 output_div;
> - bool ignore_frac;
> - bool disable_prescaler;
> bool enable_ssc;
> bool ssc_center;
> - u32 dec_bits;
> - u32 frac_bits;
> - u32 lock_timer;
> u32 ssc_freq;
> u32 ssc_offset;
> u32 ssc_adj_per;
> - u32 thresh_cycles;
> - u32 refclk_cycles;
> +
> + /* out */
> + u32 decimal_div_start;
> + u32 frac_div_start;
> + u32 pll_clock_inverters;
> + u32 ssc_stepsize;
> + u32 ssc_div_per;
> };
>
> struct pll_7nm_cached_state {
> @@ -88,15 +69,11 @@ struct dsi_pll_7nm {
>
> struct msm_dsi_phy *phy;
>
> - u64 vco_ref_clk_rate;
> u64 vco_current_rate;
>
> /* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */
> spinlock_t postdiv_lock;
>
> - struct dsi_pll_config pll_configuration;
> - struct dsi_pll_regs reg_setup;
> -
> struct pll_7nm_cached_state cached_state;
>
> struct dsi_pll_7nm *slave;
> @@ -110,35 +87,20 @@ struct dsi_pll_7nm {
> */
> static struct dsi_pll_7nm *pll_7nm_list[DSI_MAX];
>
> -static void dsi_pll_setup_config(struct dsi_pll_7nm *pll)
> +static void dsi_pll_setup_config(struct dsi_pll_config *config)
> {
> - struct dsi_pll_config *config = &pll->pll_configuration;
> -
> - config->ref_freq = pll->vco_ref_clk_rate;
> - config->output_div = 1;
> - config->dec_bits = 8;
> - config->frac_bits = 18;
> - config->lock_timer = 64;
> config->ssc_freq = 31500;
> config->ssc_offset = 4800;
> config->ssc_adj_per = 2;
> - config->thresh_cycles = 32;
> - config->refclk_cycles = 256;
> -
> - config->div_override = false;
> - config->ignore_frac = false;
> - config->disable_prescaler = false;
>
> /* TODO: ssc enable */
> config->enable_ssc = false;
> config->ssc_center = 0;
> }
>
> -static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll)
> +static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct
> dsi_pll_config *config)
> {
> - struct dsi_pll_config *config = &pll->pll_configuration;
> - struct dsi_pll_regs *regs = &pll->reg_setup;
> - u64 fref = pll->vco_ref_clk_rate;
> + u64 fref = VCO_REF_CLK_RATE;
> u64 pll_freq;
> u64 divider;
> u64 dec, dec_multiple;
> @@ -147,42 +109,34 @@ static void dsi_pll_calc_dec_frac(struct
> dsi_pll_7nm *pll)
>
> pll_freq = pll->vco_current_rate;
>
> - if (config->disable_prescaler)
> - divider = fref;
> - else
> - divider = fref * 2;
> + divider = fref * 2;
>
> - multiplier = 1 << config->frac_bits;
> + multiplier = 1 << FRAC_BITS;
> dec_multiple = div_u64(pll_freq * multiplier, divider);
> div_u64_rem(dec_multiple, multiplier, &frac);
>
> dec = div_u64(dec_multiple, multiplier);
>
> if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1))
> - regs->pll_clock_inverters = 0x28;
> + config->pll_clock_inverters = 0x28;
> else if (pll_freq <= 1000000000ULL)
> - regs->pll_clock_inverters = 0xa0;
> + config->pll_clock_inverters = 0xa0;
> else if (pll_freq <= 2500000000ULL)
> - regs->pll_clock_inverters = 0x20;
> + config->pll_clock_inverters = 0x20;
> else if (pll_freq <= 3020000000ULL)
> - regs->pll_clock_inverters = 0x00;
> + config->pll_clock_inverters = 0x00;
> else
> - regs->pll_clock_inverters = 0x40;
> + config->pll_clock_inverters = 0x40;
>
> - regs->pll_lockdet_rate = config->lock_timer;
> - regs->decimal_div_start = dec;
> - regs->frac_div_start_low = (frac & 0xff);
> - regs->frac_div_start_mid = (frac & 0xff00) >> 8;
> - regs->frac_div_start_high = (frac & 0x30000) >> 16;
> + config->decimal_div_start = dec;
> + config->frac_div_start = frac;
> }
>
> #define SSC_CENTER BIT(0)
> #define SSC_EN BIT(1)
>
> -static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll)
> +static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll, struct
> dsi_pll_config *config)
> {
> - struct dsi_pll_config *config = &pll->pll_configuration;
> - struct dsi_pll_regs *regs = &pll->reg_setup;
> u32 ssc_per;
> u32 ssc_mod;
> u64 ssc_step_size;
> @@ -193,58 +147,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_7nm
> *pll)
> return;
> }
>
> - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 -
> 1;
> + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / 2 -
> 1;
> ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1);
> ssc_per -= ssc_mod;
>
> - frac = regs->frac_div_start_low |
> - (regs->frac_div_start_mid << 8) |
> - (regs->frac_div_start_high << 16);
> - ssc_step_size = regs->decimal_div_start;
> - ssc_step_size *= (1 << config->frac_bits);
> + frac = config->frac_div_start;
> + ssc_step_size = config->decimal_div_start;
> + ssc_step_size *= (1 << FRAC_BITS);
> ssc_step_size += frac;
> ssc_step_size *= config->ssc_offset;
> ssc_step_size *= (config->ssc_adj_per + 1);
> ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1));
> ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000);
>
> - regs->ssc_div_per_low = ssc_per & 0xFF;
> - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8;
> - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF);
> - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8);
> - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF;
> - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8;
> -
> - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0;
> + config->ssc_div_per = ssc_per;
> + config->ssc_stepsize = ssc_step_size;
>
> pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n",
> - regs->decimal_div_start, frac, config->frac_bits);
> + config->decimal_div_start, frac, FRAC_BITS);
> pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n",
> ssc_per, (u32)ssc_step_size, config->ssc_adj_per);
> }
>
> -static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll)
> +static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll, struct
> dsi_pll_config *config)
> {
> void __iomem *base = pll->phy->pll_base;
> - struct dsi_pll_regs *regs = &pll->reg_setup;
>
> - if (pll->pll_configuration.enable_ssc) {
> + if (config->enable_ssc) {
> pr_debug("SSC is enabled\n");
>
> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_LOW_1,
> - regs->ssc_stepsize_low);
> + config->ssc_stepsize & 0xff);
> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_HIGH_1,
> - regs->ssc_stepsize_high);
> + config->ssc_stepsize >> 8);
> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_LOW_1,
> - regs->ssc_div_per_low);
> + config->ssc_div_per & 0xff);
> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_HIGH_1,
> - regs->ssc_div_per_high);
> + config->ssc_div_per >> 8);
> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_LOW_1,
> - regs->ssc_adjper_low);
> + config->ssc_adj_per & 0xff);
> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_HIGH_1,
> - regs->ssc_adjper_high);
> + config->ssc_adj_per >> 8);
> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_CONTROL,
> - SSC_EN | regs->ssc_control);
> + SSC_EN | (config->ssc_center ? SSC_CENTER : 0));
> }
> }
>
> @@ -296,44 +241,46 @@ static void dsi_pll_config_hzindep_reg(struct
> dsi_pll_7nm *pll)
> }
> }
>
> -static void dsi_pll_commit(struct dsi_pll_7nm *pll)
> +static void dsi_pll_commit(struct dsi_pll_7nm *pll, struct
> dsi_pll_config *config)
> {
> void __iomem *base = pll->phy->pll_base;
> - struct dsi_pll_regs *reg = &pll->reg_setup;
>
> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12);
> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1,
> reg->decimal_div_start);
> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1,
> reg->frac_div_start_low);
> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1,
> reg->frac_div_start_mid);
> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1,
> reg->frac_div_start_high);
> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1,
> reg->pll_lockdet_rate);
> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1,
> config->decimal_div_start);
> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1,
> + config->frac_div_start & 0xff);
> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1,
> + (config->frac_div_start & 0xff00) >> 8);
> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1,
> + (config->frac_div_start & 0x30000) >> 16);
> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40);
> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06);
> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO:
> 0x00 for CPHY */
> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS,
> reg->pll_clock_inverters);
> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS,
> config->pll_clock_inverters);
> }
>
> static int dsi_pll_7nm_vco_set_rate(struct clk_hw *hw, unsigned long
> rate,
> unsigned long parent_rate)
> {
> struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw);
> + struct dsi_pll_config config;
>
> DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_7nm->phy->id, rate,
> parent_rate);
>
> pll_7nm->vco_current_rate = rate;
> - pll_7nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
>
> - dsi_pll_setup_config(pll_7nm);
> + dsi_pll_setup_config(&config);
>
> - dsi_pll_calc_dec_frac(pll_7nm);
> + dsi_pll_calc_dec_frac(pll_7nm, &config);
>
> - dsi_pll_calc_ssc(pll_7nm);
> + dsi_pll_calc_ssc(pll_7nm, &config);
>
> - dsi_pll_commit(pll_7nm);
> + dsi_pll_commit(pll_7nm, &config);
>
> dsi_pll_config_hzindep_reg(pll_7nm);
>
> - dsi_pll_ssc_commit(pll_7nm);
> + dsi_pll_ssc_commit(pll_7nm, &config);
>
> /* flush, ensure all register writes are done*/
> wmb();
> @@ -486,9 +433,8 @@ static unsigned long
> dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> {
> struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw);
> - struct dsi_pll_config *config = &pll_7nm->pll_configuration;
> void __iomem *base = pll_7nm->phy->pll_base;
> - u64 ref_clk = pll_7nm->vco_ref_clk_rate;
> + u64 ref_clk = VCO_REF_CLK_RATE;
> u64 vco_rate = 0x0;
> u64 multiplier;
> u32 frac;
> @@ -508,7 +454,7 @@ static unsigned long
> dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw,
> * TODO:
> * 1. Assumes prescaler is disabled
> */
> - multiplier = 1 << config->frac_bits;
> + multiplier = 1 << FRAC_BITS;
> pll_freq = dec * (ref_clk * 2);
> tmp64 = (ref_clk * 2 * frac);
> pll_freq += div_u64(tmp64, multiplier);
> @@ -590,7 +536,7 @@ static int dsi_7nm_restore_state(struct msm_dsi_phy
> *phy)
> val |= cached->pll_mux;
> dsi_phy_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, val);
>
> - ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw,
> pll_7nm->vco_current_rate, pll_7nm->vco_ref_clk_rate);
> + ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw,
> pll_7nm->vco_current_rate, VCO_REF_CLK_RATE);
> if (ret) {
> DRM_DEV_ERROR(&pll_7nm->phy->pdev->dev,
> "restore vco rate failed. ret=%d\n", ret);
More information about the Freedreno
mailing list