[Freedreno] [PATCH v3 23/25] drm/msm/dsi: remove temp data from global pll structure
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Tue Mar 30 15:23:21 UTC 2021
On 30/03/2021 06:26, abhinavk at codeaurora.org wrote:
> On 2021-03-27 04:03, Dmitry Baryshkov wrote:
>> The 7nm, 10nm and 14nm drivers would store interim data used during
>> VCO/PLL rate setting in the global dsi_pll_Nnm structure. Move this data
>> structures to the onstack storage. While we are at it, drop
>> unused/static 'config' data, unused config fields, etc.
>>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> Reviewed-by: Abhinav Kumar <abhinavk at codeaurora.org>
Thank you for the thorough review. I'll post v4 as soon as we agree on
the patch 24.
>> ---
>> drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 167 ++++-------
>> drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 334 +++++++--------------
>> drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 166 ++++------
>> 3 files changed, 220 insertions(+), 447 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
>> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
>> index b937e77b3c37..1fbb54f4df98 100644
>> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
>> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
>> @@ -36,43 +36,25 @@
>> */
>>
>> #define VCO_REF_CLK_RATE 19200000
>> -
>> -struct dsi_pll_regs {
>> - u32 pll_prop_gain_rate;
>> - u32 pll_lockdet_rate;
>> - u32 decimal_div_start;
>> - u32 frac_div_start_low;
>> - u32 frac_div_start_mid;
>> - u32 frac_div_start_high;
>> - u32 pll_clock_inverters;
>> - u32 ssc_stepsize_low;
>> - u32 ssc_stepsize_high;
>> - u32 ssc_div_per_low;
>> - u32 ssc_div_per_high;
>> - u32 ssc_adjper_low;
>> - u32 ssc_adjper_high;
>> - u32 ssc_control;
>> -};
>> +#define FRAC_BITS 18
>>
>> /* v3.0.0 10nm implementation that requires the old timings settings */
>> #define DSI_PHY_10NM_QUIRK_OLD_TIMINGS BIT(0)
>>
>> struct dsi_pll_config {
>> - u32 ref_freq;
>> - bool div_override;
>> - u32 output_div;
>> - bool ignore_frac;
>> - bool disable_prescaler;
>> bool enable_ssc;
>> bool ssc_center;
>> - u32 dec_bits;
>> - u32 frac_bits;
>> - u32 lock_timer;
>> u32 ssc_freq;
>> u32 ssc_offset;
>> u32 ssc_adj_per;
>> - u32 thresh_cycles;
>> - u32 refclk_cycles;
>> +
>> + /* out */
>> + u32 pll_prop_gain_rate;
>> + u32 decimal_div_start;
>> + u32 frac_div_start;
>> + u32 pll_clock_inverters;
>> + u32 ssc_stepsize;
>> + u32 ssc_div_per;
>> };
>>
>> struct pll_10nm_cached_state {
>> @@ -88,15 +70,11 @@ struct dsi_pll_10nm {
>>
>> struct msm_dsi_phy *phy;
>>
>> - u64 vco_ref_clk_rate;
>> u64 vco_current_rate;
>>
>> /* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */
>> spinlock_t postdiv_lock;
>>
>> - struct dsi_pll_config pll_configuration;
>> - struct dsi_pll_regs reg_setup;
>> -
>> struct pll_10nm_cached_state cached_state;
>>
>> struct dsi_pll_10nm *slave;
>> @@ -110,34 +88,19 @@ struct dsi_pll_10nm {
>> */
>> static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX];
>>
>> -static void dsi_pll_setup_config(struct dsi_pll_10nm *pll)
>> +static void dsi_pll_setup_config(struct dsi_pll_config *config)
>> {
>> - struct dsi_pll_config *config = &pll->pll_configuration;
>> -
>> - config->ref_freq = pll->vco_ref_clk_rate;
>> - config->output_div = 1;
>> - config->dec_bits = 8;
>> - config->frac_bits = 18;
>> - config->lock_timer = 64;
>> config->ssc_freq = 31500;
>> config->ssc_offset = 5000;
>> config->ssc_adj_per = 2;
>> - config->thresh_cycles = 32;
>> - config->refclk_cycles = 256;
>> -
>> - config->div_override = false;
>> - config->ignore_frac = false;
>> - config->disable_prescaler = false;
>>
>> config->enable_ssc = false;
>> - config->ssc_center = 0;
>> + config->ssc_center = false;
>> }
>>
>> -static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll)
>> +static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll, struct
>> dsi_pll_config *config)
>> {
>> - struct dsi_pll_config *config = &pll->pll_configuration;
>> - struct dsi_pll_regs *regs = &pll->reg_setup;
>> - u64 fref = pll->vco_ref_clk_rate;
>> + u64 fref = VCO_REF_CLK_RATE;
>> u64 pll_freq;
>> u64 divider;
>> u64 dec, dec_multiple;
>> @@ -146,40 +109,32 @@ static void dsi_pll_calc_dec_frac(struct
>> dsi_pll_10nm *pll)
>>
>> pll_freq = pll->vco_current_rate;
>>
>> - if (config->disable_prescaler)
>> - divider = fref;
>> - else
>> - divider = fref * 2;
>> + divider = fref * 2;
>>
>> - multiplier = 1 << config->frac_bits;
>> + multiplier = 1 << FRAC_BITS;
>> dec_multiple = div_u64(pll_freq * multiplier, divider);
>> dec = div_u64_rem(dec_multiple, multiplier, &frac);
>>
>> if (pll_freq <= 1900000000UL)
>> - regs->pll_prop_gain_rate = 8;
>> + config->pll_prop_gain_rate = 8;
>> else if (pll_freq <= 3000000000UL)
>> - regs->pll_prop_gain_rate = 10;
>> + config->pll_prop_gain_rate = 10;
>> else
>> - regs->pll_prop_gain_rate = 12;
>> + config->pll_prop_gain_rate = 12;
>> if (pll_freq < 1100000000UL)
>> - regs->pll_clock_inverters = 8;
>> + config->pll_clock_inverters = 8;
>> else
>> - regs->pll_clock_inverters = 0;
>> + config->pll_clock_inverters = 0;
>>
>> - regs->pll_lockdet_rate = config->lock_timer;
>> - regs->decimal_div_start = dec;
>> - regs->frac_div_start_low = (frac & 0xff);
>> - regs->frac_div_start_mid = (frac & 0xff00) >> 8;
>> - regs->frac_div_start_high = (frac & 0x30000) >> 16;
>> + config->decimal_div_start = dec;
>> + config->frac_div_start = frac;
>> }
>>
>> #define SSC_CENTER BIT(0)
>> #define SSC_EN BIT(1)
>>
>> -static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll)
>> +static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll, struct
>> dsi_pll_config *config)
>> {
>> - struct dsi_pll_config *config = &pll->pll_configuration;
>> - struct dsi_pll_regs *regs = &pll->reg_setup;
>> u32 ssc_per;
>> u32 ssc_mod;
>> u64 ssc_step_size;
>> @@ -190,58 +145,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_10nm
>> *pll)
>> return;
>> }
>>
>> - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) /
>> 2 - 1;
>> + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) /
>> 2 - 1;
>> ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1);
>> ssc_per -= ssc_mod;
>>
>> - frac = regs->frac_div_start_low |
>> - (regs->frac_div_start_mid << 8) |
>> - (regs->frac_div_start_high << 16);
>> - ssc_step_size = regs->decimal_div_start;
>> - ssc_step_size *= (1 << config->frac_bits);
>> + frac = config->frac_div_start;
>> + ssc_step_size = config->decimal_div_start;
>> + ssc_step_size *= (1 << FRAC_BITS);
>> ssc_step_size += frac;
>> ssc_step_size *= config->ssc_offset;
>> ssc_step_size *= (config->ssc_adj_per + 1);
>> ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1));
>> ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000);
>>
>> - regs->ssc_div_per_low = ssc_per & 0xFF;
>> - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8;
>> - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF);
>> - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8);
>> - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF;
>> - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8;
>> -
>> - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0;
>> + config->ssc_div_per = ssc_per;
>> + config->ssc_stepsize = ssc_step_size;
>>
>> pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n",
>> - regs->decimal_div_start, frac, config->frac_bits);
>> + config->decimal_div_start, frac, FRAC_BITS);
>> pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n",
>> ssc_per, (u32)ssc_step_size, config->ssc_adj_per);
>> }
>>
>> -static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll)
>> +static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll, struct
>> dsi_pll_config *config)
>> {
>> void __iomem *base = pll->phy->pll_base;
>> - struct dsi_pll_regs *regs = &pll->reg_setup;
>>
>> - if (pll->pll_configuration.enable_ssc) {
>> + if (config->enable_ssc) {
>> pr_debug("SSC is enabled\n");
>>
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1,
>> - regs->ssc_stepsize_low);
>> + config->ssc_stepsize & 0xff);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1,
>> - regs->ssc_stepsize_high);
>> + config->ssc_stepsize >> 8);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1,
>> - regs->ssc_div_per_low);
>> + config->ssc_div_per & 0xff);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1,
>> - regs->ssc_div_per_high);
>> + config->ssc_div_per >> 8);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1,
>> - regs->ssc_adjper_low);
>> + config->ssc_adj_per & 0xff);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1,
>> - regs->ssc_adjper_high);
>> + config->ssc_adj_per >> 8);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL,
>> - SSC_EN | regs->ssc_control);
>> + SSC_EN | (config->ssc_center ? SSC_CENTER : 0));
>> }
>> }
>>
>> @@ -271,50 +217,48 @@ static void dsi_pll_config_hzindep_reg(struct
>> dsi_pll_10nm *pll)
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f);
>> }
>>
>> -static void dsi_pll_commit(struct dsi_pll_10nm *pll)
>> +static void dsi_pll_commit(struct dsi_pll_10nm *pll, struct
>> dsi_pll_config *config)
>> {
>> void __iomem *base = pll->phy->pll_base;
>> - struct dsi_pll_regs *reg = &pll->reg_setup;
>>
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE,
>> 0x12);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1,
>> - reg->decimal_div_start);
>> + config->decimal_div_start);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1,
>> - reg->frac_div_start_low);
>> + config->frac_div_start & 0xff);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1,
>> - reg->frac_div_start_mid);
>> + (config->frac_div_start & 0xff00) >> 8);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1,
>> - reg->frac_div_start_high);
>> - dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1,
>> - reg->pll_lockdet_rate);
>> + (config->frac_div_start & 0x30000) >> 16);
>> + dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, 64);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10);
>> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS,
>> - reg->pll_clock_inverters);
>> + config->pll_clock_inverters);
>> }
>>
>> static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long
>> rate,
>> unsigned long parent_rate)
>> {
>> struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw);
>> + struct dsi_pll_config config;
>>
>> DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->phy->id, rate,
>> parent_rate);
>>
>> pll_10nm->vco_current_rate = rate;
>> - pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
>>
>> - dsi_pll_setup_config(pll_10nm);
>> + dsi_pll_setup_config(&config);
>>
>> - dsi_pll_calc_dec_frac(pll_10nm);
>> + dsi_pll_calc_dec_frac(pll_10nm, &config);
>>
>> - dsi_pll_calc_ssc(pll_10nm);
>> + dsi_pll_calc_ssc(pll_10nm, &config);
>>
>> - dsi_pll_commit(pll_10nm);
>> + dsi_pll_commit(pll_10nm, &config);
>>
>> dsi_pll_config_hzindep_reg(pll_10nm);
>>
>> - dsi_pll_ssc_commit(pll_10nm);
>> + dsi_pll_ssc_commit(pll_10nm, &config);
>>
>> /* flush, ensure all register writes are done*/
>> wmb();
>> @@ -461,9 +405,8 @@ static unsigned long
>> dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw,
>> unsigned long parent_rate)
>> {
>> struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw);
>> - struct dsi_pll_config *config = &pll_10nm->pll_configuration;
>> void __iomem *base = pll_10nm->phy->pll_base;
>> - u64 ref_clk = pll_10nm->vco_ref_clk_rate;
>> + u64 ref_clk = VCO_REF_CLK_RATE;
>> u64 vco_rate = 0x0;
>> u64 multiplier;
>> u32 frac;
>> @@ -483,7 +426,7 @@ static unsigned long
>> dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw,
>> * TODO:
>> * 1. Assumes prescaler is disabled
>> */
>> - multiplier = 1 << config->frac_bits;
>> + multiplier = 1 << FRAC_BITS;
>> pll_freq = dec * (ref_clk * 2);
>> tmp64 = (ref_clk * 2 * frac);
>> pll_freq += div_u64(tmp64, multiplier);
>> @@ -565,7 +508,7 @@ static int dsi_10nm_restore_state(struct
>> msm_dsi_phy *phy)
>> val |= cached->pll_mux;
>> dsi_phy_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val);
>>
>> - ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw,
>> pll_10nm->vco_current_rate, pll_10nm->vco_ref_clk_rate);
>> + ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw,
>> pll_10nm->vco_current_rate, VCO_REF_CLK_RATE);
>> if (ret) {
>> DRM_DEV_ERROR(&pll_10nm->phy->pdev->dev,
>> "restore vco rate failed. ret=%d\n", ret);
>> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
>> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
>> index 8b4865c5796d..d08ad0c632b4 100644
>> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
>> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
>> @@ -37,51 +37,19 @@
>> #define VCO_MIN_RATE 1300000000UL
>> #define VCO_MAX_RATE 2600000000UL
>>
>> -#define DSI_PLL_DEFAULT_VCO_POSTDIV 1
>> +struct dsi_pll_config {
>> + u64 vco_current_rate;
>>
>> -struct dsi_pll_input {
>> - u32 fref; /* reference clk */
>> - u32 fdata; /* bit clock rate */
>> - u32 dsiclk_sel; /* Mux configuration (see diagram) */
>> u32 ssc_en; /* SSC enable/disable */
>> - u32 ldo_en;
>>
>> /* fixed params */
>> - u32 refclk_dbler_en;
>> - u32 vco_measure_time;
>> - u32 kvco_measure_time;
>> - u32 bandgap_timer;
>> - u32 pll_wakeup_timer;
>> u32 plllock_cnt;
>> - u32 plllock_rng;
>> u32 ssc_center;
>> u32 ssc_adj_period;
>> u32 ssc_spread;
>> u32 ssc_freq;
>> - u32 pll_ie_trim;
>> - u32 pll_ip_trim;
>> - u32 pll_iptat_trim;
>> - u32 pll_cpcset_cur;
>> - u32 pll_cpmset_cur;
>> -
>> - u32 pll_icpmset;
>> - u32 pll_icpcset;
>> -
>> - u32 pll_icpmset_p;
>> - u32 pll_icpmset_m;
>> -
>> - u32 pll_icpcset_p;
>> - u32 pll_icpcset_m;
>> -
>> - u32 pll_lpf_res1;
>> - u32 pll_lpf_cap1;
>> - u32 pll_lpf_cap2;
>> - u32 pll_c3ctrl;
>> - u32 pll_r3ctrl;
>> -};
>>
>> -struct dsi_pll_output {
>> - u32 pll_txclk_en;
>> + /* calculated */
>> u32 dec_start;
>> u32 div_frac_start;
>> u32 ssc_period;
>> @@ -91,19 +59,6 @@ struct dsi_pll_output {
>> u32 pll_vco_count;
>> u32 pll_kvco_div_ref;
>> u32 pll_kvco_count;
>> - u32 pll_misc1;
>> - u32 pll_lpf2_postdiv;
>> - u32 pll_resetsm_cntrl;
>> - u32 pll_resetsm_cntrl2;
>> - u32 pll_resetsm_cntrl5;
>> - u32 pll_kvco_code;
>> -
>> - u32 cmn_clk_cfg0;
>> - u32 cmn_clk_cfg1;
>> - u32 cmn_ldo_cntrl;
>> -
>> - u32 pll_postdiv;
>> - u32 fcvo;
>> };
>>
>> struct pll_14nm_cached_state {
>> @@ -117,15 +72,9 @@ struct dsi_pll_14nm {
>>
>> struct msm_dsi_phy *phy;
>>
>> - struct dsi_pll_input in;
>> - struct dsi_pll_output out;
>> -
>> /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */
>> spinlock_t postdiv_lock;
>>
>> - u64 vco_current_rate;
>> - u64 vco_ref_clk_rate;
>> -
>> struct pll_14nm_cached_state cached_state;
>>
>> struct dsi_pll_14nm *slave;
>> @@ -195,78 +144,50 @@ static bool pll_14nm_poll_for_ready(struct
>> dsi_pll_14nm *pll_14nm,
>> return pll_locked;
>> }
>>
>> -static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll)
>> +static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf)
>> {
>> - pll->in.fref = pll->vco_ref_clk_rate;
>> - pll->in.fdata = 0;
>> - pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */
>> - pll->in.ldo_en = 0; /* disabled for now */
>> -
>> /* fixed input */
>> - pll->in.refclk_dbler_en = 0;
>> - pll->in.vco_measure_time = 5;
>> - pll->in.kvco_measure_time = 5;
>> - pll->in.bandgap_timer = 4;
>> - pll->in.pll_wakeup_timer = 5;
>> - pll->in.plllock_cnt = 1;
>> - pll->in.plllock_rng = 0;
>> + pconf->plllock_cnt = 1;
>>
>> /*
>> * SSC is enabled by default. We might need DT props for configuring
>> * some SSC params like PPM and center/down spread etc.
>> */
>> - pll->in.ssc_en = 1;
>> - pll->in.ssc_center = 0; /* down spread by default */
>> - pll->in.ssc_spread = 5; /* PPM / 1000 */
>> - pll->in.ssc_freq = 31500; /* default recommended */
>> - pll->in.ssc_adj_period = 37;
>> -
>> - pll->in.pll_ie_trim = 4;
>> - pll->in.pll_ip_trim = 4;
>> - pll->in.pll_cpcset_cur = 1;
>> - pll->in.pll_cpmset_cur = 1;
>> - pll->in.pll_icpmset = 4;
>> - pll->in.pll_icpcset = 4;
>> - pll->in.pll_icpmset_p = 0;
>> - pll->in.pll_icpmset_m = 0;
>> - pll->in.pll_icpcset_p = 0;
>> - pll->in.pll_icpcset_m = 0;
>> - pll->in.pll_lpf_res1 = 3;
>> - pll->in.pll_lpf_cap1 = 11;
>> - pll->in.pll_lpf_cap2 = 1;
>> - pll->in.pll_iptat_trim = 7;
>> - pll->in.pll_c3ctrl = 2;
>> - pll->in.pll_r3ctrl = 1;
>> + pconf->ssc_en = 1;
>> + pconf->ssc_center = 0; /* down spread by default */
>> + pconf->ssc_spread = 5; /* PPM / 1000 */
>> + pconf->ssc_freq = 31500; /* default recommended */
>> + pconf->ssc_adj_period = 37;
>> }
>>
>> #define CEIL(x, y) (((x) + ((y) - 1)) / (y))
>>
>> -static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll)
>> +static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll, struct
>> dsi_pll_config *pconf)
>> {
>> u32 period, ssc_period;
>> u32 ref, rem;
>> u64 step_size;
>>
>> - DBG("vco=%lld ref=%lld", pll->vco_current_rate,
>> pll->vco_ref_clk_rate);
>> + DBG("vco=%lld ref=%d", pconf->vco_current_rate, VCO_REF_CLK_RATE);
>>
>> - ssc_period = pll->in.ssc_freq / 500;
>> - period = (u32)pll->vco_ref_clk_rate / 1000;
>> + ssc_period = pconf->ssc_freq / 500;
>> + period = (u32)VCO_REF_CLK_RATE / 1000;
>> ssc_period = CEIL(period, ssc_period);
>> ssc_period -= 1;
>> - pll->out.ssc_period = ssc_period;
>> + pconf->ssc_period = ssc_period;
>>
>> - DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq,
>> - pll->in.ssc_spread, pll->out.ssc_period);
>> + DBG("ssc freq=%d spread=%d period=%d", pconf->ssc_freq,
>> + pconf->ssc_spread, pconf->ssc_period);
>>
>> - step_size = (u32)pll->vco_current_rate;
>> - ref = pll->vco_ref_clk_rate;
>> + step_size = (u32)pconf->vco_current_rate;
>> + ref = VCO_REF_CLK_RATE;
>> ref /= 1000;
>> step_size = div_u64(step_size, ref);
>> step_size <<= 20;
>> step_size = div_u64(step_size, 1000);
>> - step_size *= pll->in.ssc_spread;
>> + step_size *= pconf->ssc_spread;
>> step_size = div_u64(step_size, 1000);
>> - step_size *= (pll->in.ssc_adj_period + 1);
>> + step_size *= (pconf->ssc_adj_period + 1);
>>
>> rem = 0;
>> step_size = div_u64_rem(step_size, ssc_period + 1, &rem);
>> @@ -277,18 +198,16 @@ static void pll_14nm_ssc_calc(struct
>> dsi_pll_14nm *pll)
>>
>> step_size &= 0x0ffff; /* take lower 16 bits */
>>
>> - pll->out.ssc_step_size = step_size;
>> + pconf->ssc_step_size = step_size;
>> }
>>
>> -static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll)
>> +static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll, struct
>> dsi_pll_config *pconf)
>> {
>> - struct dsi_pll_input *pin = &pll->in;
>> - struct dsi_pll_output *pout = &pll->out;
>> u64 multiplier = BIT(20);
>> u64 dec_start_multiple, dec_start, pll_comp_val;
>> u32 duration, div_frac_start;
>> - u64 vco_clk_rate = pll->vco_current_rate;
>> - u64 fref = pll->vco_ref_clk_rate;
>> + u64 vco_clk_rate = pconf->vco_current_rate;
>> + u64 fref = VCO_REF_CLK_RATE;
>>
>> DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref);
>>
>> @@ -297,14 +216,14 @@ static void pll_14nm_dec_frac_calc(struct
>> dsi_pll_14nm *pll)
>>
>> dec_start = div_u64(dec_start_multiple, multiplier);
>>
>> - pout->dec_start = (u32)dec_start;
>> - pout->div_frac_start = div_frac_start;
>> + pconf->dec_start = (u32)dec_start;
>> + pconf->div_frac_start = div_frac_start;
>>
>> - if (pin->plllock_cnt == 0)
>> + if (pconf->plllock_cnt == 0)
>> duration = 1024;
>> - else if (pin->plllock_cnt == 1)
>> + else if (pconf->plllock_cnt == 1)
>> duration = 256;
>> - else if (pin->plllock_cnt == 2)
>> + else if (pconf->plllock_cnt == 2)
>> duration = 128;
>> else
>> duration = 32;
>> @@ -313,10 +232,7 @@ static void pll_14nm_dec_frac_calc(struct
>> dsi_pll_14nm *pll)
>> pll_comp_val = div_u64(pll_comp_val, multiplier);
>> do_div(pll_comp_val, 10);
>>
>> - pout->plllock_cmp = (u32)pll_comp_val;
>> -
>> - pout->pll_txclk_en = 1;
>> - pout->cmn_ldo_cntrl = 0x3c;
>> + pconf->plllock_cmp = (u32)pll_comp_val;
>> }
>>
>> static u32 pll_14nm_kvco_slop(u32 vrate)
>> @@ -333,74 +249,66 @@ static u32 pll_14nm_kvco_slop(u32 vrate)
>> return slop;
>> }
>>
>> -static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll)
>> +static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll, struct
>> dsi_pll_config *pconf)
>> {
>> - struct dsi_pll_input *pin = &pll->in;
>> - struct dsi_pll_output *pout = &pll->out;
>> - u64 vco_clk_rate = pll->vco_current_rate;
>> - u64 fref = pll->vco_ref_clk_rate;
>> + u64 vco_clk_rate = pconf->vco_current_rate;
>> + u64 fref = VCO_REF_CLK_RATE;
>> + u32 vco_measure_time = 5;
>> + u32 kvco_measure_time = 5;
>> u64 data;
>> u32 cnt;
>>
>> - data = fref * pin->vco_measure_time;
>> + data = fref * vco_measure_time;
>> do_div(data, 1000000);
>> data &= 0x03ff; /* 10 bits */
>> data -= 2;
>> - pout->pll_vco_div_ref = data;
>> + pconf->pll_vco_div_ref = data;
>>
>> data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */
>> - data *= pin->vco_measure_time;
>> + data *= vco_measure_time;
>> do_div(data, 10);
>> - pout->pll_vco_count = data;
>> + pconf->pll_vco_count = data;
>>
>> - data = fref * pin->kvco_measure_time;
>> + data = fref * kvco_measure_time;
>> do_div(data, 1000000);
>> data &= 0x03ff; /* 10 bits */
>> data -= 1;
>> - pout->pll_kvco_div_ref = data;
>> + pconf->pll_kvco_div_ref = data;
>>
>> cnt = pll_14nm_kvco_slop(vco_clk_rate);
>> cnt *= 2;
>> cnt /= 100;
>> - cnt *= pin->kvco_measure_time;
>> - pout->pll_kvco_count = cnt;
>> -
>> - pout->pll_misc1 = 16;
>> - pout->pll_resetsm_cntrl = 48;
>> - pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3;
>> - pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer;
>> - pout->pll_kvco_code = 0;
>> + cnt *= kvco_measure_time;
>> + pconf->pll_kvco_count = cnt;
>> }
>>
>> -static void pll_db_commit_ssc(struct dsi_pll_14nm *pll)
>> +static void pll_db_commit_ssc(struct dsi_pll_14nm *pll, struct
>> dsi_pll_config *pconf)
>> {
>> void __iomem *base = pll->phy->pll_base;
>> - struct dsi_pll_input *pin = &pll->in;
>> - struct dsi_pll_output *pout = &pll->out;
>> u8 data;
>>
>> - data = pin->ssc_adj_period;
>> + data = pconf->ssc_adj_period;
>> data &= 0x0ff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data);
>> - data = (pin->ssc_adj_period >> 8);
>> + data = (pconf->ssc_adj_period >> 8);
>> data &= 0x03;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data);
>>
>> - data = pout->ssc_period;
>> + data = pconf->ssc_period;
>> data &= 0x0ff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data);
>> - data = (pout->ssc_period >> 8);
>> + data = (pconf->ssc_period >> 8);
>> data &= 0x0ff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data);
>>
>> - data = pout->ssc_step_size;
>> + data = pconf->ssc_step_size;
>> data &= 0x0ff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data);
>> - data = (pout->ssc_step_size >> 8);
>> + data = (pconf->ssc_step_size >> 8);
>> data &= 0x0ff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data);
>>
>> - data = (pin->ssc_center & 0x01);
>> + data = (pconf->ssc_center & 0x01);
>> data <<= 1;
>> data |= 0x01; /* enable */
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data);
>> @@ -409,8 +317,7 @@ static void pll_db_commit_ssc(struct dsi_pll_14nm
>> *pll)
>> }
>>
>> static void pll_db_commit_common(struct dsi_pll_14nm *pll,
>> - struct dsi_pll_input *pin,
>> - struct dsi_pll_output *pout)
>> + struct dsi_pll_config *pconf)
>> {
>> void __iomem *base = pll->phy->pll_base;
>> u8 data;
>> @@ -419,55 +326,41 @@ static void pll_db_commit_common(struct
>> dsi_pll_14nm *pll,
>> data = 0;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data);
>>
>> - data = pout->pll_txclk_en;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, 1);
>>
>> - data = pout->pll_resetsm_cntrl;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data);
>> - data = pout->pll_resetsm_cntrl2;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data);
>> - data = pout->pll_resetsm_cntrl5;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, 48);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, 4 << 3);
>> /* bandgap_timer */
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, 5); /*
>> pll_wakeup_timer */
>>
>> - data = pout->pll_vco_div_ref & 0xff;
>> + data = pconf->pll_vco_div_ref & 0xff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data);
>> - data = (pout->pll_vco_div_ref >> 8) & 0x3;
>> + data = (pconf->pll_vco_div_ref >> 8) & 0x3;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data);
>>
>> - data = pout->pll_kvco_div_ref & 0xff;
>> + data = pconf->pll_kvco_div_ref & 0xff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data);
>> - data = (pout->pll_kvco_div_ref >> 8) & 0x3;
>> + data = (pconf->pll_kvco_div_ref >> 8) & 0x3;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data);
>>
>> - data = pout->pll_misc1;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, 16);
>>
>> - data = pin->pll_ie_trim;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, 4);
>>
>> - data = pin->pll_ip_trim;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, 4);
>>
>> - data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, 1 << 3 | 1);
>>
>> - data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, 0 << 3 | 0);
>>
>> - data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, 0 << 3 | 0);
>>
>> - data = pin->pll_icpmset << 3 | pin->pll_icpcset;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, 4 << 3 | 4);
>>
>> - data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, 1 << 4 | 11);
>>
>> - data = pin->pll_iptat_trim;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, 7);
>>
>> - data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data);
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, 1 << 4 | 2);
>> }
>>
>> static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm)
>> @@ -488,8 +381,7 @@ static void pll_14nm_software_reset(struct
>> dsi_pll_14nm *pll_14nm)
>> }
>>
>> static void pll_db_commit_14nm(struct dsi_pll_14nm *pll,
>> - struct dsi_pll_input *pin,
>> - struct dsi_pll_output *pout)
>> + struct dsi_pll_config *pconf)
>> {
>> void __iomem *base = pll->phy->pll_base;
>> void __iomem *cmn_base = pll->phy->base;
>> @@ -497,57 +389,64 @@ static void pll_db_commit_14nm(struct
>> dsi_pll_14nm *pll,
>>
>> DBG("DSI%d PLL", pll->phy->id);
>>
>> - data = pout->cmn_ldo_cntrl;
>> - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data);
>> + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, 0x3c);
>>
>> - pll_db_commit_common(pll, pin, pout);
>> + pll_db_commit_common(pll, pconf);
>>
>> pll_14nm_software_reset(pll);
>>
>> - data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */
>> - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data);
>> + /* Use the /2 path in Mux */
>> + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, 1);
>>
>> data = 0xff; /* data, clk, pll normal operation */
>> dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data);
>>
>> /* configure the frequency dependent pll registers */
>> - data = pout->dec_start;
>> + data = pconf->dec_start;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data);
>>
>> - data = pout->div_frac_start & 0xff;
>> + data = pconf->div_frac_start & 0xff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data);
>> - data = (pout->div_frac_start >> 8) & 0xff;
>> + data = (pconf->div_frac_start >> 8) & 0xff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data);
>> - data = (pout->div_frac_start >> 16) & 0xf;
>> + data = (pconf->div_frac_start >> 16) & 0xf;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data);
>>
>> - data = pout->plllock_cmp & 0xff;
>> + data = pconf->plllock_cmp & 0xff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data);
>>
>> - data = (pout->plllock_cmp >> 8) & 0xff;
>> + data = (pconf->plllock_cmp >> 8) & 0xff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data);
>>
>> - data = (pout->plllock_cmp >> 16) & 0x3;
>> + data = (pconf->plllock_cmp >> 16) & 0x3;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data);
>>
>> - data = pin->plllock_cnt << 1 | pin->plllock_rng << 3;
>> + data = pconf->plllock_cnt << 1 | 0 << 3; /* plllock_rng */
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data);
>>
>> - data = pout->pll_vco_count & 0xff;
>> + data = pconf->pll_vco_count & 0xff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data);
>> - data = (pout->pll_vco_count >> 8) & 0xff;
>> + data = (pconf->pll_vco_count >> 8) & 0xff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data);
>>
>> - data = pout->pll_kvco_count & 0xff;
>> + data = pconf->pll_kvco_count & 0xff;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data);
>> - data = (pout->pll_kvco_count >> 8) & 0x3;
>> + data = (pconf->pll_kvco_count >> 8) & 0x3;
>> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data);
>>
>> - data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1;
>> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data);
>> + /*
>> + * High nibble configures the post divider internal to the VCO. It's
>> + * fixed to divide by 1 for now.
>> + *
>> + * 0: divided by 1
>> + * 1: divided by 2
>> + * 2: divided by 4
>> + * 3: divided by 8
>> + */
>> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, 0 <<
>> 4 | 3);
>>
>> - if (pin->ssc_en)
>> - pll_db_commit_ssc(pll);
>> + if (pconf->ssc_en)
>> + pll_db_commit_ssc(pll, pconf);
>>
>> wmb(); /* make sure register committed */
>> }
>> @@ -559,35 +458,20 @@ static int dsi_pll_14nm_vco_set_rate(struct
>> clk_hw *hw, unsigned long rate,
>> unsigned long parent_rate)
>> {
>> struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
>> - struct dsi_pll_input *pin = &pll_14nm->in;
>> - struct dsi_pll_output *pout = &pll_14nm->out;
>> + struct dsi_pll_config conf;
>>
>> DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->phy->id, rate,
>> parent_rate);
>>
>> - pll_14nm->vco_current_rate = rate;
>> - pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
>> -
>> - dsi_pll_14nm_input_init(pll_14nm);
>> -
>> - /*
>> - * This configures the post divider internal to the VCO. It's
>> - * fixed to divide by 1 for now.
>> - *
>> - * tx_band = pll_postdiv.
>> - * 0: divided by 1
>> - * 1: divided by 2
>> - * 2: divided by 4
>> - * 3: divided by 8
>> - */
>> - pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV;
>> + dsi_pll_14nm_config_init(&conf);
>> + conf.vco_current_rate = rate;
>>
>> - pll_14nm_dec_frac_calc(pll_14nm);
>> + pll_14nm_dec_frac_calc(pll_14nm, &conf);
>>
>> - if (pin->ssc_en)
>> - pll_14nm_ssc_calc(pll_14nm);
>> + if (conf.ssc_en)
>> + pll_14nm_ssc_calc(pll_14nm, &conf);
>>
>> - pll_14nm_calc_vco_count(pll_14nm);
>> + pll_14nm_calc_vco_count(pll_14nm, &conf);
>>
>> /* commit the slave DSI PLL registers if we're master. Note that we
>> * don't lock the slave PLL. We just ensure that the PLL/PHY
>> registers
>> @@ -596,10 +480,10 @@ static int dsi_pll_14nm_vco_set_rate(struct
>> clk_hw *hw, unsigned long rate,
>> if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) {
>> struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
>>
>> - pll_db_commit_14nm(pll_14nm_slave, pin, pout);
>> + pll_db_commit_14nm(pll_14nm_slave, &conf);
>> }
>>
>> - pll_db_commit_14nm(pll_14nm, pin, pout);
>> + pll_db_commit_14nm(pll_14nm, &conf);
>>
>> return 0;
>> }
>> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
>> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
>> index 4df237ad0eaf..ce6ae2fba993 100644
>> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
>> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
>> @@ -36,43 +36,24 @@
>> */
>>
>> #define VCO_REF_CLK_RATE 19200000
>> -
>> -struct dsi_pll_regs {
>> - u32 pll_prop_gain_rate;
>> - u32 pll_lockdet_rate;
>> - u32 decimal_div_start;
>> - u32 frac_div_start_low;
>> - u32 frac_div_start_mid;
>> - u32 frac_div_start_high;
>> - u32 pll_clock_inverters;
>> - u32 ssc_stepsize_low;
>> - u32 ssc_stepsize_high;
>> - u32 ssc_div_per_low;
>> - u32 ssc_div_per_high;
>> - u32 ssc_adjper_low;
>> - u32 ssc_adjper_high;
>> - u32 ssc_control;
>> -};
>> +#define FRAC_BITS 18
>>
>> /* Hardware is V4.1 */
>> #define DSI_PHY_7NM_QUIRK_V4_1 BIT(0)
>>
>> struct dsi_pll_config {
>> - u32 ref_freq;
>> - bool div_override;
>> - u32 output_div;
>> - bool ignore_frac;
>> - bool disable_prescaler;
>> bool enable_ssc;
>> bool ssc_center;
>> - u32 dec_bits;
>> - u32 frac_bits;
>> - u32 lock_timer;
>> u32 ssc_freq;
>> u32 ssc_offset;
>> u32 ssc_adj_per;
>> - u32 thresh_cycles;
>> - u32 refclk_cycles;
>> +
>> + /* out */
>> + u32 decimal_div_start;
>> + u32 frac_div_start;
>> + u32 pll_clock_inverters;
>> + u32 ssc_stepsize;
>> + u32 ssc_div_per;
>> };
>>
>> struct pll_7nm_cached_state {
>> @@ -88,15 +69,11 @@ struct dsi_pll_7nm {
>>
>> struct msm_dsi_phy *phy;
>>
>> - u64 vco_ref_clk_rate;
>> u64 vco_current_rate;
>>
>> /* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */
>> spinlock_t postdiv_lock;
>>
>> - struct dsi_pll_config pll_configuration;
>> - struct dsi_pll_regs reg_setup;
>> -
>> struct pll_7nm_cached_state cached_state;
>>
>> struct dsi_pll_7nm *slave;
>> @@ -110,35 +87,20 @@ struct dsi_pll_7nm {
>> */
>> static struct dsi_pll_7nm *pll_7nm_list[DSI_MAX];
>>
>> -static void dsi_pll_setup_config(struct dsi_pll_7nm *pll)
>> +static void dsi_pll_setup_config(struct dsi_pll_config *config)
>> {
>> - struct dsi_pll_config *config = &pll->pll_configuration;
>> -
>> - config->ref_freq = pll->vco_ref_clk_rate;
>> - config->output_div = 1;
>> - config->dec_bits = 8;
>> - config->frac_bits = 18;
>> - config->lock_timer = 64;
>> config->ssc_freq = 31500;
>> config->ssc_offset = 4800;
>> config->ssc_adj_per = 2;
>> - config->thresh_cycles = 32;
>> - config->refclk_cycles = 256;
>> -
>> - config->div_override = false;
>> - config->ignore_frac = false;
>> - config->disable_prescaler = false;
>>
>> /* TODO: ssc enable */
>> config->enable_ssc = false;
>> config->ssc_center = 0;
>> }
>>
>> -static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll)
>> +static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct
>> dsi_pll_config *config)
>> {
>> - struct dsi_pll_config *config = &pll->pll_configuration;
>> - struct dsi_pll_regs *regs = &pll->reg_setup;
>> - u64 fref = pll->vco_ref_clk_rate;
>> + u64 fref = VCO_REF_CLK_RATE;
>> u64 pll_freq;
>> u64 divider;
>> u64 dec, dec_multiple;
>> @@ -147,42 +109,34 @@ static void dsi_pll_calc_dec_frac(struct
>> dsi_pll_7nm *pll)
>>
>> pll_freq = pll->vco_current_rate;
>>
>> - if (config->disable_prescaler)
>> - divider = fref;
>> - else
>> - divider = fref * 2;
>> + divider = fref * 2;
>>
>> - multiplier = 1 << config->frac_bits;
>> + multiplier = 1 << FRAC_BITS;
>> dec_multiple = div_u64(pll_freq * multiplier, divider);
>> div_u64_rem(dec_multiple, multiplier, &frac);
>>
>> dec = div_u64(dec_multiple, multiplier);
>>
>> if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1))
>> - regs->pll_clock_inverters = 0x28;
>> + config->pll_clock_inverters = 0x28;
>> else if (pll_freq <= 1000000000ULL)
>> - regs->pll_clock_inverters = 0xa0;
>> + config->pll_clock_inverters = 0xa0;
>> else if (pll_freq <= 2500000000ULL)
>> - regs->pll_clock_inverters = 0x20;
>> + config->pll_clock_inverters = 0x20;
>> else if (pll_freq <= 3020000000ULL)
>> - regs->pll_clock_inverters = 0x00;
>> + config->pll_clock_inverters = 0x00;
>> else
>> - regs->pll_clock_inverters = 0x40;
>> + config->pll_clock_inverters = 0x40;
>>
>> - regs->pll_lockdet_rate = config->lock_timer;
>> - regs->decimal_div_start = dec;
>> - regs->frac_div_start_low = (frac & 0xff);
>> - regs->frac_div_start_mid = (frac & 0xff00) >> 8;
>> - regs->frac_div_start_high = (frac & 0x30000) >> 16;
>> + config->decimal_div_start = dec;
>> + config->frac_div_start = frac;
>> }
>>
>> #define SSC_CENTER BIT(0)
>> #define SSC_EN BIT(1)
>>
>> -static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll)
>> +static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll, struct
>> dsi_pll_config *config)
>> {
>> - struct dsi_pll_config *config = &pll->pll_configuration;
>> - struct dsi_pll_regs *regs = &pll->reg_setup;
>> u32 ssc_per;
>> u32 ssc_mod;
>> u64 ssc_step_size;
>> @@ -193,58 +147,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_7nm
>> *pll)
>> return;
>> }
>>
>> - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) /
>> 2 - 1;
>> + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) /
>> 2 - 1;
>> ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1);
>> ssc_per -= ssc_mod;
>>
>> - frac = regs->frac_div_start_low |
>> - (regs->frac_div_start_mid << 8) |
>> - (regs->frac_div_start_high << 16);
>> - ssc_step_size = regs->decimal_div_start;
>> - ssc_step_size *= (1 << config->frac_bits);
>> + frac = config->frac_div_start;
>> + ssc_step_size = config->decimal_div_start;
>> + ssc_step_size *= (1 << FRAC_BITS);
>> ssc_step_size += frac;
>> ssc_step_size *= config->ssc_offset;
>> ssc_step_size *= (config->ssc_adj_per + 1);
>> ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1));
>> ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000);
>>
>> - regs->ssc_div_per_low = ssc_per & 0xFF;
>> - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8;
>> - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF);
>> - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8);
>> - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF;
>> - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8;
>> -
>> - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0;
>> + config->ssc_div_per = ssc_per;
>> + config->ssc_stepsize = ssc_step_size;
>>
>> pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n",
>> - regs->decimal_div_start, frac, config->frac_bits);
>> + config->decimal_div_start, frac, FRAC_BITS);
>> pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n",
>> ssc_per, (u32)ssc_step_size, config->ssc_adj_per);
>> }
>>
>> -static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll)
>> +static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll, struct
>> dsi_pll_config *config)
>> {
>> void __iomem *base = pll->phy->pll_base;
>> - struct dsi_pll_regs *regs = &pll->reg_setup;
>>
>> - if (pll->pll_configuration.enable_ssc) {
>> + if (config->enable_ssc) {
>> pr_debug("SSC is enabled\n");
>>
>> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_LOW_1,
>> - regs->ssc_stepsize_low);
>> + config->ssc_stepsize & 0xff);
>> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_HIGH_1,
>> - regs->ssc_stepsize_high);
>> + config->ssc_stepsize >> 8);
>> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_LOW_1,
>> - regs->ssc_div_per_low);
>> + config->ssc_div_per & 0xff);
>> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_HIGH_1,
>> - regs->ssc_div_per_high);
>> + config->ssc_div_per >> 8);
>> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_LOW_1,
>> - regs->ssc_adjper_low);
>> + config->ssc_adj_per & 0xff);
>> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_HIGH_1,
>> - regs->ssc_adjper_high);
>> + config->ssc_adj_per >> 8);
>> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_CONTROL,
>> - SSC_EN | regs->ssc_control);
>> + SSC_EN | (config->ssc_center ? SSC_CENTER : 0));
>> }
>> }
>>
>> @@ -296,44 +241,46 @@ static void dsi_pll_config_hzindep_reg(struct
>> dsi_pll_7nm *pll)
>> }
>> }
>>
>> -static void dsi_pll_commit(struct dsi_pll_7nm *pll)
>> +static void dsi_pll_commit(struct dsi_pll_7nm *pll, struct
>> dsi_pll_config *config)
>> {
>> void __iomem *base = pll->phy->pll_base;
>> - struct dsi_pll_regs *reg = &pll->reg_setup;
>>
>> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12);
>> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1,
>> reg->decimal_div_start);
>> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1,
>> reg->frac_div_start_low);
>> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1,
>> reg->frac_div_start_mid);
>> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1,
>> reg->frac_div_start_high);
>> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1,
>> reg->pll_lockdet_rate);
>> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1,
>> config->decimal_div_start);
>> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1,
>> + config->frac_div_start & 0xff);
>> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1,
>> + (config->frac_div_start & 0xff00) >> 8);
>> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1,
>> + (config->frac_div_start & 0x30000) >> 16);
>> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40);
>> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06);
>> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO:
>> 0x00 for CPHY */
>> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS,
>> reg->pll_clock_inverters);
>> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS,
>> config->pll_clock_inverters);
>> }
>>
>> static int dsi_pll_7nm_vco_set_rate(struct clk_hw *hw, unsigned long
>> rate,
>> unsigned long parent_rate)
>> {
>> struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw);
>> + struct dsi_pll_config config;
>>
>> DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_7nm->phy->id, rate,
>> parent_rate);
>>
>> pll_7nm->vco_current_rate = rate;
>> - pll_7nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
>>
>> - dsi_pll_setup_config(pll_7nm);
>> + dsi_pll_setup_config(&config);
>>
>> - dsi_pll_calc_dec_frac(pll_7nm);
>> + dsi_pll_calc_dec_frac(pll_7nm, &config);
>>
>> - dsi_pll_calc_ssc(pll_7nm);
>> + dsi_pll_calc_ssc(pll_7nm, &config);
>>
>> - dsi_pll_commit(pll_7nm);
>> + dsi_pll_commit(pll_7nm, &config);
>>
>> dsi_pll_config_hzindep_reg(pll_7nm);
>>
>> - dsi_pll_ssc_commit(pll_7nm);
>> + dsi_pll_ssc_commit(pll_7nm, &config);
>>
>> /* flush, ensure all register writes are done*/
>> wmb();
>> @@ -486,9 +433,8 @@ static unsigned long
>> dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw,
>> unsigned long parent_rate)
>> {
>> struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw);
>> - struct dsi_pll_config *config = &pll_7nm->pll_configuration;
>> void __iomem *base = pll_7nm->phy->pll_base;
>> - u64 ref_clk = pll_7nm->vco_ref_clk_rate;
>> + u64 ref_clk = VCO_REF_CLK_RATE;
>> u64 vco_rate = 0x0;
>> u64 multiplier;
>> u32 frac;
>> @@ -508,7 +454,7 @@ static unsigned long
>> dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw,
>> * TODO:
>> * 1. Assumes prescaler is disabled
>> */
>> - multiplier = 1 << config->frac_bits;
>> + multiplier = 1 << FRAC_BITS;
>> pll_freq = dec * (ref_clk * 2);
>> tmp64 = (ref_clk * 2 * frac);
>> pll_freq += div_u64(tmp64, multiplier);
>> @@ -590,7 +536,7 @@ static int dsi_7nm_restore_state(struct
>> msm_dsi_phy *phy)
>> val |= cached->pll_mux;
>> dsi_phy_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, val);
>>
>> - ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw,
>> pll_7nm->vco_current_rate, pll_7nm->vco_ref_clk_rate);
>> + ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw,
>> pll_7nm->vco_current_rate, VCO_REF_CLK_RATE);
>> if (ret) {
>> DRM_DEV_ERROR(&pll_7nm->phy->pdev->dev,
>> "restore vco rate failed. ret=%d\n", ret);
--
With best wishes
Dmitry
More information about the Freedreno
mailing list