[Freedreno] [PATCH] drm/msm: populate intf_audio_select() base on hardware capability

[Kuogee Hsieh]

On 2/11/2022 3:36 PM, Dmitry Baryshkov wrote:
> On Sat, 12 Feb 2022 at 02:23, Kuogee Hsieh<quic_khsieh at quicinc.com>  wrote:
>> intf_audio_select() callback function use to configure
>> HDMI_DP_CORE_SELECT to decide audio output routes to HDMI or DP
>> interface. HDMI is obsoleted at newer chipset. To keep supporting
>> legacy hdmi application, intf_audio_select call back function have
>> to be populated base on hardware chip capability where legacy
>> chipsets have has_audio_select flag set to true.
>>
>> Signed-off-by: Kuogee Hsieh<quic_khsieh at quicinc.com>
>> ---
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 ++
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c     | 9 ++++++---
>>   3 files changed, 9 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> index 272b14b..23680e7 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> @@ -201,6 +201,7 @@ static const struct dpu_caps sdm845_dpu_caps = {
>>          .has_dim_layer = true,
>>          .has_idle_pc = true,
>>          .has_3d_merge = true,
>> +       .has_audio_select = true,
>>          .max_linewidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
>>          .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
>>          .max_hdeci_exp = MAX_HORZ_DECIMATION,
>> @@ -229,6 +230,7 @@ static const struct dpu_caps sm8150_dpu_caps = {
>>          .has_dim_layer = true,
>>          .has_idle_pc = true,
>>          .has_3d_merge = true,
>> +       .has_audio_select = true,
>>          .max_linewidth = 4096,
>>          .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
>>          .max_hdeci_exp = MAX_HORZ_DECIMATION,
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> index e5a96d6..b33f91b 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> @@ -357,6 +357,7 @@ struct dpu_caps {
>>          bool has_dim_layer;
>>          bool has_idle_pc;
>>          bool has_3d_merge;
>> +       bool has_audio_select;
> I'd suggest adding a bit to dpu_mdp_cfg's features instead, following
> the example of other hardware blocks.

it may cause mis leading if we put this in hardware level since 
MDP_HDMI_DP_SELECT  bit has not be connected

to logic for a while even it still present at ipcat. Also this bit but 
will be  removed at next release.

Is dpu_caps level more proper than in hardware feature level?


>
>>          /* SSPP limits */
>>          u32 max_linewidth;
>>          u32 pixel_ram_size;
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> index 282e3c6..e608f4d 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> @@ -261,14 +261,17 @@ static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
>>   }
>>
>>   static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
>> -               unsigned long cap)
>> +               unsigned long cap,
>> +               const struct dpu_mdss_cfg *m)
>>   {
>>          ops->setup_split_pipe = dpu_hw_setup_split_pipe;
>>          ops->setup_clk_force_ctrl = dpu_hw_setup_clk_force_ctrl;
>>          ops->get_danger_status = dpu_hw_get_danger_status;
>>          ops->setup_vsync_source = dpu_hw_setup_vsync_source;
>>          ops->get_safe_status = dpu_hw_get_safe_status;
>> -       ops->intf_audio_select = dpu_hw_intf_audio_select;
>> +
>> +       if (m->caps->has_audio_select)
>> +               ops->intf_audio_select = dpu_hw_intf_audio_select;
>>   }
>>
>>   static const struct dpu_mdp_cfg *_top_offset(enum dpu_mdp mdp,
>> @@ -320,7 +323,7 @@ struct dpu_hw_mdp *dpu_hw_mdptop_init(enum dpu_mdp idx,
>>           */
>>          mdp->idx = idx;
>>          mdp->caps = cfg;
>> -       _setup_mdp_ops(&mdp->ops, mdp->caps->features);
>> +       _setup_mdp_ops(&mdp->ops, mdp->caps->features, m);
>>
>>          return mdp;
>>   }
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/freedreno/attachments/20220214/d029fd15/attachment.htm>