[Freedreno] [PATCH] drm/msm: populate intf_audio_select() base on hardware capability
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Mon Feb 14 21:00:26 UTC 2022
On 14/02/2022 20:55, Kuogee Hsieh wrote:
>
> On 2/11/2022 3:36 PM, Dmitry Baryshkov wrote:
>> On Sat, 12 Feb 2022 at 02:23, Kuogee Hsieh<quic_khsieh at quicinc.com> wrote:
>>> intf_audio_select() callback function use to configure
>>> HDMI_DP_CORE_SELECT to decide audio output routes to HDMI or DP
>>> interface. HDMI is obsoleted at newer chipset. To keep supporting
>>> legacy hdmi application, intf_audio_select call back function have
>>> to be populated base on hardware chip capability where legacy
>>> chipsets have has_audio_select flag set to true.
>>>
>>> Signed-off-by: Kuogee Hsieh<quic_khsieh at quicinc.com>
>>> ---
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 ++
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c | 9 ++++++---
>>> 3 files changed, 9 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>> index 272b14b..23680e7 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>> @@ -201,6 +201,7 @@ static const struct dpu_caps sdm845_dpu_caps = {
>>> .has_dim_layer = true,
>>> .has_idle_pc = true,
>>> .has_3d_merge = true,
>>> + .has_audio_select = true,
>>> .max_linewidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
>>> .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
>>> .max_hdeci_exp = MAX_HORZ_DECIMATION,
>>> @@ -229,6 +230,7 @@ static const struct dpu_caps sm8150_dpu_caps = {
>>> .has_dim_layer = true,
>>> .has_idle_pc = true,
>>> .has_3d_merge = true,
>>> + .has_audio_select = true,
>>> .max_linewidth = 4096,
>>> .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
>>> .max_hdeci_exp = MAX_HORZ_DECIMATION,
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> index e5a96d6..b33f91b 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> @@ -357,6 +357,7 @@ struct dpu_caps {
>>> bool has_dim_layer;
>>> bool has_idle_pc;
>>> bool has_3d_merge;
>>> + bool has_audio_select;
>> I'd suggest adding a bit to dpu_mdp_cfg's features instead, following
>> the example of other hardware blocks.
>
> it may cause mis leading if we put this in hardware level since
> MDP_HDMI_DP_SELECT bit has not be connected
>
> to logic for a while even it still present at ipcat. Also this bit but
> will be removed at next release.
I'm sorry, I can't quite catch you. Why would you like to remove this
bit at the next release?
>
> Is dpu_caps level more proper than in hardware feature level?
A priciple of the least surprise. In other hardware-dependent virtual
functions selection we use block's caps->features rather than boolean flags.
>
>
>>> /* SSPP limits */
>>> u32 max_linewidth;
>>> u32 pixel_ram_size;
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>>> index 282e3c6..e608f4d 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>>> @@ -261,14 +261,17 @@ static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
>>> }
>>>
>>> static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
>>> - unsigned long cap)
>>> + unsigned long cap,
>>> + const struct dpu_mdss_cfg *m)
>>> {
>>> ops->setup_split_pipe = dpu_hw_setup_split_pipe;
>>> ops->setup_clk_force_ctrl = dpu_hw_setup_clk_force_ctrl;
>>> ops->get_danger_status = dpu_hw_get_danger_status;
>>> ops->setup_vsync_source = dpu_hw_setup_vsync_source;
>>> ops->get_safe_status = dpu_hw_get_safe_status;
>>> - ops->intf_audio_select = dpu_hw_intf_audio_select;
>>> +
>>> + if (m->caps->has_audio_select)
>>> + ops->intf_audio_select = dpu_hw_intf_audio_select;
>>> }
>>>
>>> static const struct dpu_mdp_cfg *_top_offset(enum dpu_mdp mdp,
>>> @@ -320,7 +323,7 @@ struct dpu_hw_mdp *dpu_hw_mdptop_init(enum dpu_mdp idx,
>>> */
>>> mdp->idx = idx;
>>> mdp->caps = cfg;
>>> - _setup_mdp_ops(&mdp->ops, mdp->caps->features);
>>> + _setup_mdp_ops(&mdp->ops, mdp->caps->features, m);
>>>
>>> return mdp;
>>> }
--
With best wishes
Dmitry
More information about the Freedreno
mailing list