[Freedreno] [PATCH 3/4] ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS

[Dmitry Baryshkov]

On 08/05/2023 11:33, Konrad Dybcio wrote:
> 
> 
> On 7.05.2023 21:07, Dmitry Baryshkov wrote:
>> Enable ADSP and Modem DSPs on APQ8074 dragonboard. The MSS region
>> differs from the one defined in the msm8974, so it overriden locally.
>>
>> The modem is specified use mba.mbn instead of mbn.b00 (for the sake of
>> similarity with other platforms). This requires a patch for remoteproc
>> to be applied [1].
>>
>> [1] https://lore.kernel.org/all/20230507172041.2320279-1-dmitry.baryshkov@linaro.org/
>>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>> ---
>>   .../arm/boot/dts/qcom-apq8074-dragonboard.dts | 28 +++++++++++++++++++
>>   1 file changed, 28 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
>> index 6b047c679370..c893afc00eb4 100644
>> --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
>> +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
>> @@ -4,6 +4,8 @@
>>   #include "qcom-pm8841.dtsi"
>>   #include "qcom-pm8941.dtsi"
>>   
>> +/delete-node/ &mpss_region;
>> +
>>   / {
>>   	model = "Qualcomm APQ8074 Dragonboard";
>>   	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
>> @@ -17,6 +19,13 @@ aliases {
>>   	chosen {
>>   		stdout-path = "serial0:115200n8";
>>   	};
>> +
>> +	reserved-memory {
>> +		mpss_region: mpss at ac00000 {
>> +			reg = <0x0ac00000 0x2500000>;
>> +			no-map;
>> +		};
>> +	};
>>   };
>>   
>>   &blsp1_uart2 {
>> @@ -39,6 +48,25 @@ eeprom: eeprom at 52 {
>>   	};
>>   };
>>   
>> +&remoteproc_adsp {
>> +	cx-supply = <&pm8841_s2>;
>> +
>> +	firmware-name = "qcom/apq8074/adsp.mbn";
>> +
>> +	status = "okay";
>> +};
>> +
>> +&remoteproc_mss {
>> +	cx-supply = <&pm8841_s2>;
>> +	mss-supply = <&pm8841_s3>;
>> +	mx-supply = <&pm8841_s1>;
>> +	pll-supply = <&pm8941_l12>;
> High time to move this to rpmpd!
> I won't object to adding this though, as it obviously works
> and is already used on other boards..

I think the problem is that they are not level-voted on this platform, 
so they are regulators, not PDs.

> 
>> +
>> +	firmware-name = "qcom/apq8074/mba.mbn", "qcom/apq8074/modem.mbn";
> Could you please keep it one entry per line?

Sure.

> 
> Otherwise,
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> 
> Konrad
>> +
>> +	status = "okay";
>> +};
>> +
>>   &rpm_requests {
>>   	regulators-0 {
>>   		compatible = "qcom,rpm-pm8841-regulators";

-- 
With best wishes
Dmitry