[PATCH 4/4] drm/msm/dp: remove ST_DISPLAY_OFF as a hpd_state

[Abhinav Kumar]

ST_DISPLAY_OFF check in msm_dp_bridge_atomic_enable() is used to check
that if the display was disabled while still hotplugged, phy needs
to be re-initialized. This can be replaced with a different check as
it just means the hpd_state was still ST_CONNECTED but without display
being powered on. Replace the ST_DISPLAY_OFF check with a combination
of connected and power_on checks.

Since all consumers of ST_DISPLAY_OFF have now been removed,
drop ST_DISPLAY_OFF from the list of hpd_states as technically
this was never a 'hpd' state anyway.

Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 831876aa5b35..340366bdb277 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -48,7 +48,6 @@ enum {
 	ST_MAINLINK_READY,
 	ST_CONNECTED,
 	ST_DISCONNECT_PENDING,
-	ST_DISPLAY_OFF,
 };
 
 enum {
@@ -1522,7 +1521,7 @@ void msm_dp_bridge_atomic_enable(struct drm_bridge *drm_bridge,
 
 	state =  msm_dp_display->hpd_state;
 
-	if (state == ST_DISPLAY_OFF) {
+	if (state == ST_CONNECTED && !dp->power_on) {
 		msm_dp_display_host_phy_init(msm_dp_display);
 		force_link_train = true;
 	}
@@ -1580,8 +1579,6 @@ void msm_dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
 	if (state == ST_DISCONNECT_PENDING) {
 		/* completed disconnection */
 		msm_dp_display->hpd_state = ST_DISCONNECTED;
-	} else {
-		msm_dp_display->hpd_state = ST_DISPLAY_OFF;
 	}
 
 	drm_dbg_dp(dp->drm_dev, "type=%d Done\n", dp->connector_type);

-- 
2.34.1