December 2024 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Dec 1 16:36:23 UTC 2024
Ending: Tue Dec 31 14:04:22 UTC 2024
Messages: 889

• [PATCH] dt-bindings: display: msm: sm8350-mdss: document the third interconnect path   Rob Herring (Arm)
• [PATCH v3 4/6] dt-bindings: opp: Add v2-qcom-adreno vendor bindings   Rob Herring (Arm)
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Connor Abbott
• [RFC] drm/msm: Add UABI to request perfcntr usage   Connor Abbott
• [PATCH v2] drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp   Doug Anderson
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Bjorn Andersson
• [PATCH v4 0/9] Add display support for QCS615 platform   Bjorn Andersson
• (subset) [PATCH v2 0/4] drm/msm/adreno: Add A615 GPU for SDM670 and Pixel 3a   Bjorn Andersson
• (subset) [PATCH v6 0/7] drm/msm: adreno: add support for DDR bandwidth scaling via GMU   Bjorn Andersson
• [PATCH v2 0/2] arm64: dts: qcom: sm8[56]50: correct MDSS interconnects   Bjorn Andersson
• [PATCH v3 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   Neil Armstrong
• [PATCH v3 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   Neil Armstrong
• [PATCH v3 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750   Neil Armstrong
• [PATCH] dt-bindings: display: msm: sm8350-mdss: document the third interconnect path   Neil Armstrong
• [PATCH] dt-bindings: display: msm: sm8350-mdss: document the third interconnect path   Neil Armstrong
• [PATCH v3 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   Neil Armstrong
• [PATCH v4 0/7] drm/msm: adreno: add support for DDR bandwidth scaling via GMU   Neil Armstrong
• [PATCH v4 1/7] drm/msm: adreno: add defines for gpu & gmu frequency table sizes   Neil Armstrong
• [PATCH v4 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   Neil Armstrong
• [PATCH v4 3/7] drm/msm: adreno: dynamically generate GMU bw table   Neil Armstrong
• [PATCH v4 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Neil Armstrong
• [PATCH v4 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750   Neil Armstrong
• [PATCH v4 6/7] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU   Neil Armstrong
• [PATCH v4 7/7] arm64: qcom: dts: sm8650: add interconnect and opp-peak-kBps for GPU   Neil Armstrong
• [PATCH v4 6/7] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU   Neil Armstrong
• [PATCH v4 3/7] drm/msm: adreno: dynamically generate GMU bw table   Neil Armstrong
• [PATCH v5 0/7] drm/msm: adreno: add support for DDR bandwidth scaling via GMU   Neil Armstrong
• [PATCH v5 1/7] drm/msm: adreno: add defines for gpu & gmu frequency table sizes   Neil Armstrong
• [PATCH v5 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   Neil Armstrong
• [PATCH v5 3/7] drm/msm: adreno: dynamically generate GMU bw table   Neil Armstrong
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Neil Armstrong
• [PATCH v5 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750   Neil Armstrong
• [PATCH v5 6/7] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU   Neil Armstrong
• [PATCH v5 7/7] arm64: qcom: dts: sm8650: add interconnect and opp-peak-kBps for GPU   Neil Armstrong
• [PATCH v5 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750   Neil Armstrong
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Neil Armstrong
• [PATCH v5 3/7] drm/msm: adreno: dynamically generate GMU bw table   Neil Armstrong
• [PATCH v5 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   Neil Armstrong
• [PATCH v6 0/7] drm/msm: adreno: add support for DDR bandwidth scaling via GMU   Neil Armstrong
• [PATCH v6 1/7] drm/msm: adreno: add defines for gpu & gmu frequency table sizes   Neil Armstrong
• [PATCH v6 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   Neil Armstrong
• [PATCH v6 3/7] drm/msm: adreno: dynamically generate GMU bw table   Neil Armstrong
• [PATCH v6 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Neil Armstrong
• [PATCH v6 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750   Neil Armstrong
• [PATCH v6 6/7] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU   Neil Armstrong
• [PATCH v6 7/7] arm64: qcom: dts: sm8650: add interconnect and opp-peak-kBps for GPU   Neil Armstrong
• [PATCH v2 2/2] arm64: dts: qcom: sm8650: correct MDSS interconnects   Neil Armstrong
• [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes   Dmitry Baryshkov
• [PATCH v2 00/14] drm/msm/dp: perform misc cleanups   Dmitry Baryshkov
• [PATCH v2 01/14] drm/msm/dp: set safe_to_exit_level before printing it   Dmitry Baryshkov
• [PATCH v2 02/14] drm/msm/dp: fix msm_dp_utils_pack_sdp_header interface   Dmitry Baryshkov
• [PATCH v2 03/14] drm/msm/dp: drop msm_dp_panel_dump_regs() and msm_dp_catalog_dump_regs()   Dmitry Baryshkov
• [PATCH v2 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Dmitry Baryshkov
• [PATCH v2 05/14] drm/msm/dp: move I/O functions to global header   Dmitry Baryshkov
• [PATCH v2 06/14] drm/msm/dp: move/inline AUX register functions   Dmitry Baryshkov
• [PATCH v2 07/14] drm/msm/dp: move/inline ctrl register functions   Dmitry Baryshkov
• [PATCH v2 08/14] drm/msm/dp: move/inline panel related functions   Dmitry Baryshkov
• [PATCH v2 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Dmitry Baryshkov
• [PATCH v2 10/14] drm/msm/dp: drop obsolete audio headers access through catalog   Dmitry Baryshkov
• [PATCH v2 11/14] drm/msm/dp: move/inline audio related functions   Dmitry Baryshkov
• [PATCH v2 12/14] drm/msm/dp: move more AUX functions to dp_aux.c   Dmitry Baryshkov
• [PATCH v2 13/14] drm/msm/dp: drop struct msm_dp_panel_in   Dmitry Baryshkov
• [PATCH v2 14/14] drm/msm/dp: move interrupt handling to dp_ctrl   Dmitry Baryshkov
• [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration   Dmitry Baryshkov
• [PATCH 00/10] drm/connector: add eld_mutex to protect connector->eld   Dmitry Baryshkov
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Dmitry Baryshkov
• [PATCH 1/1] drm/msm: Expose uche trap base via uapi   Dmitry Baryshkov
• [PATCH 1/1] drm/msm: Expose uche trap base via uapi   Dmitry Baryshkov
• [PATCH 2/4] dt-bindings: display: msm: dp-controller: document clock parents better   Dmitry Baryshkov
• [PATCH 3/4] dt-bindings: display/msm: add stream 1 pixel clock binding   Dmitry Baryshkov
• [PATCH 0/4] drm/msm/dp: ST_DISPLAY_OFF hpd cleanup   Dmitry Baryshkov
• [PATCH 1/4] drm/msm/dp: remove redundant checks related to ST_DISPLAY_OFF in plug/irq_ipd handlers   Dmitry Baryshkov
• [PATCH 2/4] drm/msm/dp: remove redundant ST_DISPLAY_OFF checks in msm_dp_bridge_atomic_enable()   Dmitry Baryshkov
• [PATCH 3/4] drm/msm/dp: replace ST_DISPLAY_OFF with power_on in msm_dp_hpd_unplug_handle()   Dmitry Baryshkov
• [PATCH 4/4] drm/msm/dp: remove ST_DISPLAY_OFF as a hpd_state   Dmitry Baryshkov
• [PATCH 07/10] drm/msm/dp: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes   Dmitry Baryshkov
• [PATCH 7/8] drm/msm/dp: Retry Link Training 2 with lower pattern   Dmitry Baryshkov
• [PATCH 0/3] drm/msm/dp: Fix and utilize TPG with a debugfs   Dmitry Baryshkov
• [PATCH 1/3] drm/msm/dp: account for widebus in msm_dp_catalog_panel_tpg_enable()   Dmitry Baryshkov
• [PATCH 1/1] drm/msm: Expose uche trap base via uapi   Dmitry Baryshkov
• [PATCH 2/3] drm/msm/dp: do not touch the MMSS_DP_INTF_CONFIG for tpg   Dmitry Baryshkov
• [PATCH 0/3] drm/msm/dp: Fix and utilize TPG with a debugfs   Dmitry Baryshkov
• [PATCH 3/3] drm/msm/dp: add a debugfs node for using tpg   Dmitry Baryshkov
• [PATCH v2 1/1] drm/msm: Expose uche trap base via uapi   Dmitry Baryshkov
• [PATCH 1/4] drm/msm/dp: remove redundant checks related to ST_DISPLAY_OFF in plug/irq_ipd handlers   Dmitry Baryshkov
• [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag   Dmitry Baryshkov
• [PATCH 2/4] dt-bindings: display: msm: dp-controller: document clock parents better   Dmitry Baryshkov
• [PATCH 2/4] drm/msm/dp: remove redundant ST_DISPLAY_OFF checks in msm_dp_bridge_atomic_enable()   Dmitry Baryshkov
• [PATCH 3/3] drm/msm/dp: add a debugfs node for using tpg   Dmitry Baryshkov
• [PATCH] dt-bindings: display: msm: sm8350-mdss: document the third interconnect path   Dmitry Baryshkov
• [PATCH 2/5] dt-bindings: display/msm: Document the DPU for QCS8300   Dmitry Baryshkov
• [PATCH 2/4] dt-bindings: display: msm: dp-controller: document clock parents better   Dmitry Baryshkov
• [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration   Dmitry Baryshkov
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Dmitry Baryshkov
• [PATCH 02/45] drm/msm/dp: disable the opp table request even for dp_ctrl_off_link()   Dmitry Baryshkov
• [PATCH 03/45] drm/msm/dp: fix the intf_type of MST interfaces   Dmitry Baryshkov
• [PATCH 04/45] drm/msm/dp: split msm_dp_panel_read_sink_caps() into two parts   Dmitry Baryshkov
• [PATCH 05/45] drm/msm/dp: add a helper to read mst caps for dp_panel   Dmitry Baryshkov
• [PATCH 06/45] drm/msm/dp: remove dp_display's dp_mode and use dp_panel's instead   Dmitry Baryshkov
• [PATCH 07/45] drm/msm/dp: break up dp_display_enable into two parts   Dmitry Baryshkov
• [PATCH 09/45] drm/msm/dp: allow dp_ctrl stream APIs to use any panel passed to it   Dmitry Baryshkov
• [PATCH 10/45] drm/msm/dp: move the pixel clock control to its own API   Dmitry Baryshkov
• [PATCH 11/45] drm/msm/dp: split dp_ctrl_off() into stream and link parts   Dmitry Baryshkov
• [PATCH 40/45] drm/msm: add a stream to intf map for DP controller   Dmitry Baryshkov
• [PATCH 41/45] drm/msm/dpu: use msm_dp_get_mst_intf_id() to get the intf id   Dmitry Baryshkov
• [PATCH 37/45] drm/msm: add support for non-blocking commits   Dmitry Baryshkov
• [PATCH 29/45] drm/msm/dp: skip reading the EDID for MST cases   Dmitry Baryshkov
• [PATCH 16/45] drm/msm/dp: add support for programming p1 register block   Dmitry Baryshkov
• [PATCH 16/45] drm/msm/dp: add support for programming p1 register block   Dmitry Baryshkov
• [PATCH v2 00/10] drm/connector: add eld_mutex to protect connector->eld   Dmitry Baryshkov
• [PATCH v2 01/10] drm/connector: add mutex to protect ELD from concurrent access   Dmitry Baryshkov
• [PATCH v2 02/10] drm/bridge: anx7625: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 03/10] drm/bridge: ite-it66121: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 05/10] drm/exynos: hdmi: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 06/10] drm/i915/audio: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 07/10] drm/msm/dp: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 08/10] drm/radeon: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 09/10] drm/sti: hdmi: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 10/10] drm/vc4: hdmi: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH 31/45] drm/msm/dp: add dp_mst_drm to manage DP MST bridge operations   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Dmitry Baryshkov
• [PATCH 17/45] drm/msm/dp: use stream_id to change offsets in dp_catalog   Dmitry Baryshkov
• [PATCH 18/45] drm/msm/dp: add support to send ACT packets for MST   Dmitry Baryshkov
• [PATCH 20/45] drm/msm/dp: no need to update tu calculation for mst   Dmitry Baryshkov
• [PATCH 21/45] drm/msm/dp: add support for mst channel slot allocation   Dmitry Baryshkov
• [PATCH 22/45] drm/msm/dp: add support to send vcpf packets in dp controller   Dmitry Baryshkov
• [PATCH 16/45] drm/msm/dp: add support for programming p1 register block   Dmitry Baryshkov
• [PATCH 38/45] drm/msm: initialize DRM MST encoders for DP controllers   Dmitry Baryshkov
• [PATCH 39/45] drm/msm/dp: initialize dp_mst module for each DP MST controller   Dmitry Baryshkov
• [PATCH 33/45] drm/msm/dp: add irq hpd callback for dp mst   Dmitry Baryshkov
• [PATCH 31/45] drm/msm/dp: add dp_mst_drm to manage DP MST bridge operations   Dmitry Baryshkov
• [PATCH 32/45] drm/msm/dp: add connector abstraction for DP MST   Dmitry Baryshkov
• [PATCH 30/45] drm/msm/dp: add dp_display_get_panel() to initialize DP panel   Dmitry Baryshkov
• [PATCH 34/45] drm/msm/dp: add support to re-use and clear the panel edid   Dmitry Baryshkov
• [PATCH 35/45] drm/msm/dp: add a mst session mutex to protect bridge ops   Dmitry Baryshkov
• [PATCH 36/45] drm/msm/dp: propagate hpd state changes to dp mst module   Dmitry Baryshkov
• [PATCH 12/45] drm/msm/dp: make bridge helpers use dp_display to allow re-use   Dmitry Baryshkov
• [PATCH 14/45] drm/msm/dp: introduce stream_id for each DP panel   Dmitry Baryshkov
• [PATCH 15/45] drm/msm/dp: convert dp_display_set_mode() to use dp_panel argument   Dmitry Baryshkov
• [PATCH 19/45] drm/msm/dp: add support to program mst support in mainlink   Dmitry Baryshkov
• [PATCH 23/45] drm/msm/dp: always program MST_FIFO_CONSTANT_FILL for MST   Dmitry Baryshkov
• [PATCH 24/45] drm/msm/dp: abstract out the dp_display stream helpers to accept a panel   Dmitry Baryshkov
• [PATCH 25/45] drm/msm/dp: move link related operations to dp_display_unprepare()   Dmitry Baryshkov
• [PATCH 26/45] drm/msm/dp: replace power_on with active_stream_cnt for dp_display   Dmitry Baryshkov
• [PATCH 27/45] drm/msm/dp: make the SST bridge disconnected when mst is active   Dmitry Baryshkov
• [PATCH 28/45] drm/msm/dp: add an API to initialize MST on sink side   Dmitry Baryshkov
• [PATCH 42/45] drm/msm/dp: mark ST_DISCONNECTED only if all streams are disabled   Dmitry Baryshkov
• [PATCH 43/45] drm/msm/dp: populate the max_streams for sa8775 mst controller   Dmitry Baryshkov
• [PATCH 08/45] drm/msm/dp: re-arrange dp_display_disable() into functional parts   Dmitry Baryshkov
• [PATCH v3] drm/msm/dpu1: don't choke on disabling the writeback connector   Dmitry Baryshkov
• [PATCH 01/45] drm/msm/dp: dont call dp_catalog_ctrl_mainlink_ctrl in dp_ctrl_configure_source_params()   Dmitry Baryshkov
• [PATCH v3] drm/msm/dpu1: don't choke on disabling the writeback connector   Dmitry Baryshkov
• [PATCH v4] drm/msm/dpu1: don't choke on disabling the writeback connector   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp   Dmitry Baryshkov
• [PATCH v2] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Dmitry Baryshkov
• [PATCH v4] drm/msm/dpu1: don't choke on disabling the writeback connector   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Dmitry Baryshkov
• [PATCH v3] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Dmitry Baryshkov
• [PATCH v4] drm/msm/dpu1: don't choke on disabling the writeback connector   Dmitry Baryshkov
• [PATCH v4] drm/msm/dpu1: don't choke on disabling the writeback connector   Dmitry Baryshkov
• [PATCH v4 7/9] drm/msm/dsi: Add support for SM6150   Dmitry Baryshkov
• [PATCH v4 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board   Dmitry Baryshkov
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Dmitry Baryshkov
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Dmitry Baryshkov
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Dmitry Baryshkov
• [PATCH RFC 4/4] drm/msm/dp: Add support for LTTPR handling   Dmitry Baryshkov
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Dmitry Baryshkov
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Dmitry Baryshkov
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Dmitry Baryshkov
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Dmitry Baryshkov
• [PATCH v2] drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp   Dmitry Baryshkov
• [PATCH v7 2/3] drm/msm/dpu: allow using two SSPP blocks for a single plane   Dmitry Baryshkov
• [PATCH v7 2/3] drm/msm/dpu: allow using two SSPP blocks for a single plane   Dmitry Baryshkov
• [PATCH v3 00/14] drm/msm/dp: perform misc cleanups   Dmitry Baryshkov
• [PATCH v3 01/14] drm/msm/dp: set safe_to_exit_level before printing it   Dmitry Baryshkov
• [PATCH v3 02/14] drm/msm/dp: fix msm_dp_utils_pack_sdp_header interface   Dmitry Baryshkov
• [PATCH v3 03/14] drm/msm/dp: drop msm_dp_panel_dump_regs() and msm_dp_catalog_dump_regs()   Dmitry Baryshkov
• [PATCH v3 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Dmitry Baryshkov
• [PATCH v3 05/14] drm/msm/dp: move I/O functions to global header   Dmitry Baryshkov
• [PATCH v3 06/14] drm/msm/dp: move/inline AUX register functions   Dmitry Baryshkov
• [PATCH v3 07/14] drm/msm/dp: move/inline ctrl register functions   Dmitry Baryshkov
• [PATCH v3 08/14] drm/msm/dp: move/inline panel related functions   Dmitry Baryshkov
• [PATCH v3 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Dmitry Baryshkov
• [PATCH v3 10/14] drm/msm/dp: drop obsolete audio headers access through catalog   Dmitry Baryshkov
• [PATCH v3 11/14] drm/msm/dp: move/inline audio related functions   Dmitry Baryshkov
• [PATCH v3 12/14] drm/msm/dp: move more AUX functions to dp_aux.c   Dmitry Baryshkov
• [PATCH v3 13/14] drm/msm/dp: drop struct msm_dp_panel_in   Dmitry Baryshkov
• [PATCH v3 14/14] drm/msm/dp: move interrupt handling to dp_ctrl   Dmitry Baryshkov
• [PATCH v3 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Dmitry Baryshkov
• [PATCH v3 13/14] drm/msm/dp: drop struct msm_dp_panel_in   Dmitry Baryshkov
• [PATCH v3 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Dmitry Baryshkov
• [PATCH v3 01/14] drm/msm/dp: set safe_to_exit_level before printing it   Dmitry Baryshkov
• [PATCH v3 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Dmitry Baryshkov
• [PATCH v3 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Dmitry Baryshkov
• [PATCH v3 01/14] drm/msm/dp: set safe_to_exit_level before printing it   Dmitry Baryshkov
• [PATCH v3 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: Filter modes based on adjusted mode clock   Dmitry Baryshkov
• [PATCH v4 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board   Dmitry Baryshkov
• [PATCH RESEND v2 4/4] arm64: dts: qcom: qcs615-ride: Enable Adreno 612 GPU   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: Filter modes based on adjusted mode clock   Dmitry Baryshkov
• [PATCH 00/35] drm/msm/dpu: rework HW block feature handling   Dmitry Baryshkov
• [PATCH 01/35] drm/msm/dpu: skip watchdog timer programming through TOP on >= SM8450   Dmitry Baryshkov
• [PATCH 02/35] drm/msm/dpu: enable DPU_WB_INPUT_CTRL for DPU 5.x   Dmitry Baryshkov
• [PATCH 03/35] drm/msm/dpu: stop passing mdss_ver to setup_timing_gen()   Dmitry Baryshkov
• [PATCH 04/35] drm/msm/dpu: drop INTF_SC7280_MASK   Dmitry Baryshkov
• [PATCH 05/35] drm/msm/dpu: inline _setup_ctl_ops()   Dmitry Baryshkov
• [PATCH 06/35] drm/msm/dpu: inline _setup_dsc_ops()   Dmitry Baryshkov
• [PATCH 07/35] drm/msm/dpu: inline _setup_dspp_ops()   Dmitry Baryshkov
• [PATCH 08/35] drm/msm/dpu: inline _setup_mixer_ops()   Dmitry Baryshkov
• [PATCH 09/35] drm/msm/dpu: remove DSPP_SC7180_MASK   Dmitry Baryshkov
• [PATCH 10/35] drm/msm/dpu: get rid of DPU_CTL_HAS_LAYER_EXT4   Dmitry Baryshkov
• [PATCH 11/35] drm/msm/dpu: get rid of DPU_CTL_ACTIVE_CFG   Dmitry Baryshkov
• [PATCH 12/35] drm/msm/dpu: get rid of DPU_CTL_FETCH_ACTIVE   Dmitry Baryshkov
• [PATCH 13/35] drm/msm/dpu: get rid of DPU_CTL_DSPP_SUB_BLOCK_FLUSH   Dmitry Baryshkov
• [PATCH 14/35] drm/msm/dpu: get rid of DPU_CTL_VM_CFG   Dmitry Baryshkov
• [PATCH 15/35] drm/msm/dpu: get rid of DPU_DATA_HCTL_EN   Dmitry Baryshkov
• [PATCH 16/35] drm/msm/dpu: get rid of DPU_INTF_STATUS_SUPPORTED   Dmitry Baryshkov
• [PATCH 17/35] drm/msm/dpu: get rid of DPU_INTF_INPUT_CTRL   Dmitry Baryshkov
• [PATCH 18/35] drm/msm/dpu: get rid of DPU_PINGPONG_DSC   Dmitry Baryshkov
• [PATCH 19/35] drm/msm/dpu: get rid of DPU_PINGPONG_DITHER   Dmitry Baryshkov
• [PATCH 20/35] drm/msm/dpu: get rid of DPU_MDP_VSYNC_SEL   Dmitry Baryshkov
• [PATCH 21/35] drm/msm/dpu: get rid of DPU_MDP_PERIPH_0_REMOVED   Dmitry Baryshkov
• [PATCH 22/35] drm/msm/dpu: get rid of DPU_MDP_AUDIO_SELECT   Dmitry Baryshkov
• [PATCH 23/35] drm/msm/dpu: get rid of DPU_MIXER_COMBINED_ALPHA   Dmitry Baryshkov
• [PATCH 24/35] drm/msm/dpu: get rid of DPU_DIM_LAYER   Dmitry Baryshkov
• [PATCH 25/35] drm/msm/dpu: get rid of DPU_DSC_HW_REV_1_2   Dmitry Baryshkov
• [PATCH 26/35] drm/msm/dpu: get rid of DPU_DSC_OUTPUT_CTRL   Dmitry Baryshkov
• [PATCH 27/35] drm/msm/dpu: get rid of DPU_WB_INPUT_CTRL   Dmitry Baryshkov
• [PATCH 28/35] drm/msm/dpu: get rid of DPU_SSPP_QOS_8LVL   Dmitry Baryshkov
• [PATCH 29/35] drm/msm/dpu: drop unused MDP TOP features   Dmitry Baryshkov
• [PATCH 30/35] drm/msm/dpu: drop ununused PINGPONG features   Dmitry Baryshkov
• [PATCH 31/35] drm/msm/dpu: drop ununused MIXER features   Dmitry Baryshkov
• [PATCH 32/35] drm/msm/dpu: get rid of DPU_MIXER_SOURCESPLIT   Dmitry Baryshkov
• [PATCH 33/35] drm/msm/dpu: get rid of DPU_DSC_NATIVE_42x_EN   Dmitry Baryshkov
• [PATCH 34/35] drm/msm/dpu: get rid of DPU_CTL_SPLIT_DISPLAY   Dmitry Baryshkov
• [PATCH 35/35] drm/msm/dpu: move features out of the DPU_HW_BLK_INFO   Dmitry Baryshkov
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Dmitry Baryshkov
• [PATCH v2 1/5] drm/encoder_slave: make mode_valid accept const struct drm_display_mode   Dmitry Baryshkov
• [PATCH v2 2/5] drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()   Dmitry Baryshkov
• [PATCH v2 3/5] drm/sti: hda: pass const struct drm_display_mode* to hda_get_mode_idx()   Dmitry Baryshkov
• [PATCH v2 4/5] drm/connector: make mode_valid_ctx take a const struct drm_display_mode   Dmitry Baryshkov
• [PATCH v2 5/5] drm/connector: make mode_valid take a const struct drm_display_mode   Dmitry Baryshkov
• [PATCH v3 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Dmitry Baryshkov
• [PATCH v8 0/3] drm/msm/dpu: support virtual wide planes   Dmitry Baryshkov
• [PATCH v8 1/3] drm/msm/dpu: add support for virtual planes   Dmitry Baryshkov
• [PATCH v8 2/3] drm/msm/dpu: allow using two SSPP blocks for a single plane   Dmitry Baryshkov
• [PATCH v8 3/3] drm/msm/dpu: include SSPP allocation state into the dumped state   Dmitry Baryshkov
• [PATCH v8 2/3] drm/msm/dpu: allow using two SSPP blocks for a single plane   Dmitry Baryshkov
• [PATCH v5] drm/msm/dpu: allow sharing SSPP between planes   Dmitry Baryshkov
• [PATCH v3 0/3] drm/msm/mdss: rework UBWC registers programming   Dmitry Baryshkov
• [PATCH v8 0/3] drm/msm/dpu: support virtual wide planes   Dmitry Baryshkov
• [PATCH v3] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Dmitry Baryshkov
• [PATCH v4 0/9] Add display support for QCS615 platform   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: Add VBIF to DPU snapshot   Dmitry Baryshkov
• [PATCH v4 00/16] drm/msm/dp: perform misc cleanups   Dmitry Baryshkov
• [PATCH v4 01/16] drm/msm/dp: drop msm_dp_panel_dump_regs() and msm_dp_catalog_dump_regs()   Dmitry Baryshkov
• [PATCH v4 02/16] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Dmitry Baryshkov
• [PATCH v4 03/16] drm/msm/dp: drop obsolete audio headers access through catalog   Dmitry Baryshkov
• [PATCH v4 04/16] drm/msm/dp: drop struct msm_dp_panel_in   Dmitry Baryshkov
• [PATCH v4 05/16] drm/msm/dp: stop passing panel to msm_dp_audio_get()   Dmitry Baryshkov
• [PATCH v4 06/16] drm/msm/dp: split MMSS_DP_DSC_DTO register write to a separate function   Dmitry Baryshkov
• [PATCH v4 07/16] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Dmitry Baryshkov
• [PATCH v4 08/16] drm/msm/dp: move I/O functions to global header   Dmitry Baryshkov
• [PATCH v4 09/16] drm/msm/dp: move/inline AUX register functions   Dmitry Baryshkov
• [PATCH v4 10/16] drm/msm/dp: move/inline ctrl register functions   Dmitry Baryshkov
• [PATCH v4 11/16] drm/msm/dp: move/inline panel related functions   Dmitry Baryshkov
• [PATCH v4 12/16] drm/msm/dp: move/inline audio related functions   Dmitry Baryshkov
• [PATCH v4 13/16] drm/msm/dp: move more AUX functions to dp_aux.c   Dmitry Baryshkov
• [PATCH v4 14/16] drm/msm/dp: move interrupt handling to dp_ctrl   Dmitry Baryshkov
• [PATCH v4 15/16] drm/msm/dp: read hw revision only once   Dmitry Baryshkov
• [PATCH v4 16/16] drm/msm/dp: drop the msm_dp_catalog module   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: correct LM pairing for SM6150   Dmitry Baryshkov
• [PATCH 0/8] drm/msm/dpu: catalog corrections   Dmitry Baryshkov
• [PATCH 1/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8150   Dmitry Baryshkov
• [PATCH 2/8] drm/msm/dpu: link DSPP_2/_3 blocks on SC8180X   Dmitry Baryshkov
• [PATCH 3/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8250   Dmitry Baryshkov
• [PATCH 4/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8350   Dmitry Baryshkov
• [PATCH 5/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8550   Dmitry Baryshkov
• [PATCH 6/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8650   Dmitry Baryshkov
• [PATCH 7/8] drm/msm/dpu: link DSPP_2/_3 blocks on X1E80100   Dmitry Baryshkov
• [PATCH 8/8] drm/msm/dpu: provide DSPP and correct LM config for SDM670   Dmitry Baryshkov
• [PATCH] drm/msm: fix -Wformat-security warnings   Dmitry Baryshkov
• [PATCH v2 00/10] drm/connector: add eld_mutex to protect connector->eld   Dmitry Baryshkov
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 00/10] drm/connector: add eld_mutex to protect connector->eld   Dmitry Baryshkov
• [PATCH 1/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8150   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: correct LM pairing for SM6150   Dmitry Baryshkov
• [PATCH v4 02/16] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Dmitry Baryshkov
• [PATCH v4 06/16] drm/msm/dp: split MMSS_DP_DSC_DTO register write to a separate function   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: Filter modes based on adjusted mode clock   Dmitry Baryshkov
• [PATCH v3 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Dmitry Baryshkov
• [PATCH v4 05/25] drm/msm/dpu: get rid of struct dpu_rm_requirements   Dmitry Baryshkov
• [PATCH 7/8] drm/msm/dpu: link DSPP_2/_3 blocks on X1E80100   Dmitry Baryshkov
• [PATCH v4 5/9] drm/msm/dpu: Add SM6150 support   Dmitry Baryshkov
• [PATCH v4 5/9] drm/msm/dpu: Add SM6150 support   Dmitry Baryshkov
• [PATCH v2] drm/msm/dpu: correct LM pairing for SM6150   Dmitry Baryshkov
• [PATCH v2 5/5] drm/msm/dpu: rate limit snapshot capture for mmu faults   Dmitry Baryshkov
• [PATCH v4 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board   Dmitry Baryshkov
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Dmitry Baryshkov
• [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration   Dmitry Baryshkov
• [PATCH v3 02/15] drm/msm/dpu: configure DSC per number in use   Dmitry Baryshkov
• [PATCH v3 03/15] drm/msm/dpu: polish log for resource allocation   Dmitry Baryshkov
• [PATCH v3 01/15] drm/msm/dpu: Do not fix number of DSC   Dmitry Baryshkov
• [PATCH v3 04/15] drm/msm/dpu: decide right side per last bit   Dmitry Baryshkov
• [PATCH v3 05/15] drm/msm/dpu: fix mixer number counter on allocation   Dmitry Baryshkov
• [PATCH v3 08/15] drm/msm/dpu: handle pipes as array   Dmitry Baryshkov
• [PATCH v3 09/15] drm/msm/dpu: split PIPES_PER_STAGE definition per plane and mixer   Dmitry Baryshkov
• [PATCH v3 10/15] drm/msm/dpu: Add pipe as trace argument   Dmitry Baryshkov
• [PATCH v3 11/15] drm/msm/dpu: blend pipes per mixer pairs config   Dmitry Baryshkov
• [PATCH v3 12/15] drm/msm/dpu: support plane splitting in quad-pipe case   Dmitry Baryshkov
• [PATCH v3 13/15] drm/msm/dpu: Support quad-pipe in SSPP checking   Dmitry Baryshkov
• [PATCH v3 14/15] drm/msm/dpu: support SSPP assignment for quad-pipe case   Dmitry Baryshkov
• [PATCH v3 15/15] drm/msm/dpu: Enable quad-pipe for DSC and dual-DSI case   Dmitry Baryshkov
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Dmitry Baryshkov
• [PATCH v2 0/8] drm/msm/dpu: catalog corrections   Dmitry Baryshkov
• [PATCH v2 1/8] drm/msm/dpu: provide DSPP and correct LM config for SDM670   Dmitry Baryshkov
• [PATCH v2 2/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8150   Dmitry Baryshkov
• [PATCH v2 3/8] drm/msm/dpu: link DSPP_2/_3 blocks on SC8180X   Dmitry Baryshkov
• [PATCH v2 4/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8250   Dmitry Baryshkov
• [PATCH v2 5/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8350   Dmitry Baryshkov
• [PATCH v2 6/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8550   Dmitry Baryshkov
• [PATCH v2 7/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8650   Dmitry Baryshkov
• [PATCH v2 8/8] drm/msm/dpu: link DSPP_2/_3 blocks on X1E80100   Dmitry Baryshkov
• [PATCH v4 07/25] drm/msm/dpu: move resource allocation to CRTC   Dmitry Baryshkov
• [PATCH v4 08/25] drm/msm/dpu: fill CRTC resources in dpu_crtc.c   Dmitry Baryshkov
• [PATCH v4 07/25] drm/msm/dpu: move resource allocation to CRTC   Dmitry Baryshkov
• [PATCH v4 08/25] drm/msm/dpu: fill CRTC resources in dpu_crtc.c   Dmitry Baryshkov
• [PATCH v4 15/25] drm/msm/dpu: Add CWB to msm_display_topology   Dmitry Baryshkov
• [PATCH v4 00/25] drm/msm/dpu: Add Concurrent Writeback Support for DPU 10.x+   Dmitry Baryshkov
• [PATCH v4 16/25] drm/msm/dpu: Require modeset if clone mode status changes   Dmitry Baryshkov
• [PATCH v4 17/25] drm/msm/dpu: Fail atomic_check if CWB and CDM are enabled   Dmitry Baryshkov
• [PATCH v4 18/25] drm/msm/dpu: Reserve resources for CWB   Dmitry Baryshkov
• [PATCH v4 19/25] drm/msm/dpu: Configure CWB in writeback encoder   Dmitry Baryshkov
• [PATCH v4 24/25] drm/msm/dpu: Reorder encoder kickoff for CWB   Dmitry Baryshkov
• [PATCH v3] drm/msm/a6xx: Add support for Adreno 612   Dmitry Baryshkov
• [PATCH v4 18/25] drm/msm/dpu: Reserve resources for CWB   Dmitry Baryshkov
• [PATCH 0/6] drm: enforce rules for drm_atomic_helper_check_modeset()   Dmitry Baryshkov
• [PATCH 1/6] drm/atomic-helper: document drm_atomic_helper_check() restrictions   Dmitry Baryshkov
• [PATCH 2/6] drm/atomic: prepare to check that drivers follow restrictions for needs_modeset   Dmitry Baryshkov
• [PATCH 3/6] drm/msm/dpu: don't use active in atomic_check()   Dmitry Baryshkov
• [PATCH 4/6] drm/msm/dpu: move needs_cdm setting to dpu_encoder_get_topology()   Dmitry Baryshkov
• [PATCH 5/6] drm/msm/dpu: simplify dpu_encoder_get_topology() interface   Dmitry Baryshkov
• [PATCH 6/6] drm/msm/dpu: don't set crtc_state->mode_changed from atomic_check()   Dmitry Baryshkov
• [PATCH v4 00/16] drm/msm/dp: perform misc cleanups   Dmitry Baryshkov
• [PATCH v5 00/11] drm/msm/dp: perform misc cleanups   Dmitry Baryshkov
• [PATCH v5 01/11] drm/msm/dp: split MMSS_DP_DSC_DTO register write to a separate function   Dmitry Baryshkov
• [PATCH v5 02/11] drm/msm/dp: read hw revision only once   Dmitry Baryshkov
• [PATCH v5 03/11] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Dmitry Baryshkov
• [PATCH v5 04/11] drm/msm/dp: move I/O functions to global header   Dmitry Baryshkov
• [PATCH v5 05/11] drm/msm/dp: move/inline AUX register functions   Dmitry Baryshkov
• [PATCH v5 06/11] drm/msm/dp: move/inline panel related functions   Dmitry Baryshkov
• [PATCH v5 07/11] drm/msm/dp: move/inline audio related functions   Dmitry Baryshkov
• [PATCH v5 08/11] drm/msm/dp: move/inline ctrl register functions   Dmitry Baryshkov
• [PATCH v5 09/11] drm/msm/dp: move more AUX functions to dp_aux.c   Dmitry Baryshkov
• [PATCH v5 10/11] drm/msm/dp: move interrupt handling to dp_ctrl   Dmitry Baryshkov
• [PATCH v5 11/11] drm/msm/dp: drop the msm_dp_catalog module   Dmitry Baryshkov
• [PATCH v2 2/3] dt-bindings: opp: Add v2-qcom-adreno vendor bindings   Dmitry Baryshkov
• [PATCH 0/4] drm/msm/dpu: enable CDM for all supported platforms   Dmitry Baryshkov
• [PATCH 1/4] drm/msm/dpu: rename CDM block definition   Dmitry Baryshkov
• [PATCH 2/4] drm/msm/dpu: enable CDM_0 for all DPUs which are known to have it   Dmitry Baryshkov
• [PATCH 3/4] drm/msm/dpu: enable CDM_0 for SC8280XP platform   Dmitry Baryshkov
• [PATCH 4/4] drm/msm/dpu: enable CDM_0 for X Elite platform   Dmitry Baryshkov
• [PATCH v4 06/25] drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocation   Dmitry Baryshkov
• [PATCH v4 07/25] drm/msm/dpu: move resource allocation to CRTC   Dmitry Baryshkov
• [PATCH 2/4] drm/msm/dp: remove redundant ST_DISPLAY_OFF checks in msm_dp_bridge_atomic_enable()   Dmitry Baryshkov
• [PATCH v3 10/23] drm/msm/dpu: Add dpu_hw_cwb abstraction for CWB block   Dmitry Baryshkov
• [PATCH v4 06/25] drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocation   Dmitry Baryshkov
• [PATCH] drm/msm: fix -Wformat-security warnings   Dmitry Baryshkov
• [PATCH 0/3] drm/msm/mdp4: fix probe deferral issues   Dmitry Baryshkov
• [PATCH v2 0/8] drm/msm/dpu: catalog corrections   Dmitry Baryshkov
• [PATCH v4 00/16] drm/msm/dp: perform misc cleanups   Dmitry Baryshkov
• [PATCH 0/4] dt-bindings: msm/dp: add support for pixel clock to driver another stream   Dmitry Baryshkov
• [PATCH v4 00/25] drm/msm/dpu: Add Concurrent Writeback Support for DPU 10.x+   Dmitry Baryshkov
• [PATCH] drm/msm: Check return value of of_dma_configure()   Dmitry Baryshkov
• [PATCH v2 4/5] dt-bindings: phy: Add eDP PHY compatible for QCS8300   Dmitry Baryshkov
• [PATCH v2 0/5] Display enablement changes for Qualcomm QCS8300 platform   Dmitry Baryshkov
• [PATCH v4 18/25] drm/msm/dpu: Reserve resources for CWB   Dmitry Baryshkov
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Dmitry Baryshkov
• [PATCH v4 17/25] drm/msm/dpu: Fail atomic_check if CWB and CDM are enabled   Dmitry Baryshkov
• [PATCH v3 10/15] drm/msm/dpu: Add pipe as trace argument   Dmitry Baryshkov
• [PATCH] drm/msm: fix -Wformat-security warnings   Arnd Bergmann
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Elliot Berman
• [PATCH v2 05/14] drm/msm/dp: move I/O functions to global header   Stephen Boyd
• [PATCH v2 06/14] drm/msm/dp: move/inline AUX register functions   Stephen Boyd
• [PATCH v2 01/14] drm/msm/dp: set safe_to_exit_level before printing it   Stephen Boyd
• [PATCH v2 02/14] drm/msm/dp: fix msm_dp_utils_pack_sdp_header interface   Stephen Boyd
• [PATCH v2 03/14] drm/msm/dp: drop msm_dp_panel_dump_regs() and msm_dp_catalog_dump_regs()   Stephen Boyd
• [PATCH v2 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Stephen Boyd
• [PATCH v2 07/14] drm/msm/dp: move/inline ctrl register functions   Stephen Boyd
• [PATCH v2 08/14] drm/msm/dp: move/inline panel related functions   Stephen Boyd
• [PATCH v2 10/14] drm/msm/dp: drop obsolete audio headers access through catalog   Stephen Boyd
• [PATCH v2 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Stephen Boyd
• [PATCH v2 11/14] drm/msm/dp: move/inline audio related functions   Stephen Boyd
• [PATCH v2 13/14] drm/msm/dp: drop struct msm_dp_panel_in   Stephen Boyd
• [PATCH v2 12/14] drm/msm/dp: move more AUX functions to dp_aux.c   Stephen Boyd
• [PATCH v2 14/14] drm/msm/dp: move interrupt handling to dp_ctrl   Stephen Boyd
• [PATCH v2] drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp   Stephen Boyd
• [PATCH v3 05/14] drm/msm/dp: move I/O functions to global header   Stephen Boyd
• [PATCH v3 06/14] drm/msm/dp: move/inline AUX register functions   Stephen Boyd
• [PATCH v3 00/14] drm/msm/dp: perform misc cleanups   Stephen Boyd
• [PATCH v4 02/16] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Stephen Boyd
• [PATCH v4 05/16] drm/msm/dp: stop passing panel to msm_dp_audio_get()   Stephen Boyd
• [PATCH v4 06/16] drm/msm/dp: split MMSS_DP_DSC_DTO register write to a separate function   Stephen Boyd
• [PATCH v4 15/16] drm/msm/dp: read hw revision only once   Stephen Boyd
• [PATCH v4 16/16] drm/msm/dp: drop the msm_dp_catalog module   Stephen Boyd
• [bug report] drm/msm/dpu: add support for virtual planes   Dan Carpenter
• [PATCH v2 1/2] drm/msm/adreno: Introduce ADRENO_QUIRK_NO_SYSCACHE   Rob Clark
• [PATCH 1/1] drm/msm: Expose uche trap base via uapi   Rob Clark
• [PATCH v2 1/2] drm/msm/adreno: Introduce ADRENO_QUIRK_NO_SYSCACHE   Rob Clark
• [PATCH v2 1/2] drm/msm/adreno: Introduce ADRENO_QUIRK_NO_SYSCACHE   Rob Clark
• [RFC] drm/msm: Add UABI to request perfcntr usage   Rob Clark
• [RFC 00/24] drm/msm: sparse / "VM_BIND" support   Rob Clark
• [RFC 01/24] HACK: drm/msm: Disable shrinker   Rob Clark
• [RFC 02/24] drm/gpuvm: Don't require obj lock in destructor path   Rob Clark
• [RFC 03/24] drm/gpuvm: Remove bogus lock assert   Rob Clark
• [RFC 04/24] drm/msm: Rename msm_file_private -> msm_context   Rob Clark
• [RFC 05/24] drm/msm: Improve msm_context comments   Rob Clark
• [RFC 06/24] drm/msm: Rename msm_gem_address_space -> msm_gem_vm   Rob Clark
• [RFC 07/24] drm/msm: Remove vram carveout support   Rob Clark
• [RFC 08/24] drm/msm: Collapse vma allocation and initialization   Rob Clark
• [RFC 09/24] drm/msm: Collapse vma close and delete   Rob Clark
• [RFC 10/24] drm/msm: drm_gpuvm conversion   Rob Clark
• [RFC 11/24] drm/msm: Use drm_gpuvm types more   Rob Clark
• [RFC 12/24] drm/msm: Split submit_pin_objects()   Rob Clark
• [RFC 13/24] drm/msm: Lazily create context VM   Rob Clark
• [RFC 14/24] drm/msm: Add opt-in for VM_BIND   Rob Clark
• [RFC 15/24] drm/msm: Mark VM as unusable on faults   Rob Clark
• [RFC 16/24] drm/msm: Extend SUBMIT ioctl for VM_BIND   Rob Clark
• [RFC 17/24] drm/msm: Add VM_BIND submitqueue   Rob Clark
• [RFC 18/24] drm/msm: Add _NO_SHARE flag   Rob Clark
• [RFC 19/24] drm/msm: Split out helper to get iommu prot flags   Rob Clark
• [RFC 20/24] drm/msm: Add mmu support for non-zero offset   Rob Clark
• [RFC 21/24] drm/msm: Add PRR support   Rob Clark
• [RFC 22/24] drm/msm: Rename msm_gem_vma_purge() -> _unmap()   Rob Clark
• [RFC 23/24] drm/msm: Wire up gpuvm ops   Rob Clark
• [RFC 24/24] drm/msm: Bump UAPI version   Rob Clark
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Rob Clark
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Rob Clark
• [PATCH v10 0/4] io-pgtable-arm + drm/msm: Extend iova fault debugging   Rob Clark
• [PATCH v11 0/4] io-pgtable-arm + drm/msm: Extend iova fault debugging   Rob Clark
• [PATCH v11 1/4] iommu/io-pgtable-arm: Make pgtable walker more generic   Rob Clark
• [PATCH v11 2/4] iommu/io-pgtable-arm: Re-use the pgtable walk for iova_to_phys   Rob Clark
• [PATCH v11 3/4] iommu/io-pgtable-arm: Add way to debug pgtable walk   Rob Clark
• [PATCH v11 4/4] drm/msm: Extend gpu devcore dumps with pgtbl info   Rob Clark
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Rob Clark
• [RFC] drm/msm: Add UABI to request perfcntr usage   Rob Clark
• [RFC] drm/msm: Add UABI to request perfcntr usage   Rob Clark
• [PATCH] drm/msm: UAPI error reporting   Rob Clark
• [RFC] drm/msm: Add UABI to request perfcntr usage   Rob Clark
• [PATCH] iommu/arm-smmu-qcom: Only enable stall on smmu-v2   Rob Clark
• [RFC] drm/msm: Add UABI to request perfcntr usage   Rob Clark
• [RFC] drm/msm: Add UABI to request perfcntr usage   Rob Clark
• [PATCH] iommu/arm-smmu-qcom: Only enable stall on smmu-v2   Rob Clark
• [PATCH] iommu/arm-smmu-qcom: Only enable stall on smmu-v2   Rob Clark
• [PATCH v2] drm/msm: UAPI error reporting   Rob Clark
• [PATCH 1/1] drm/msm: Expose uche trap base via uapi   Danylo
• [PATCH 1/1] drm/msm: Expose uche trap base via uapi   Danylo
• [PATCH v10 0/4] io-pgtable-arm + drm/msm: Extend iova fault debugging   Will Deacon
• [PATCH] iommu/arm-smmu-qcom: Only enable stall on smmu-v2   Will Deacon
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Alex Deucher
• [PATCH v2 1/2] arm64: dts: qcom: sm8550: correct MDSS interconnects   Konrad Dybcio
• [PATCH 2/3] arm64: dts: qcom: qcs615: Add gpu and gmu nodes   Konrad Dybcio
• [PATCH 44/45] arm64: dts: qcom: add mst support for pixel stream clk for DP0   Konrad Dybcio
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Konrad Dybcio
• [PATCH v5 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   Konrad Dybcio
• [PATCH v5 3/7] drm/msm: adreno: dynamically generate GMU bw table   Konrad Dybcio
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Konrad Dybcio
• [PATCH v5 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750   Konrad Dybcio
• [PATCH v2 2/4] dt-bindings: display/msm/gmu: Document RGMU   Konrad Dybcio
• [PATCH v2 3/4] arm64: dts: qcom: qcs615: Add gpu and gmu nodes   Konrad Dybcio
• [PATCH v2 4/4] arm64: dts: qcom: qcs615-ride: Enable Adreno 612 GPU   Konrad Dybcio
• [PATCH v5 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750   Konrad Dybcio
• [PATCH] drm/msm: UAPI error reporting   Konrad Dybcio
• [PATCH RESEND v2 3/4] arm64: dts: qcom: qcs615: Add gpu and gmu nodes   Konrad Dybcio
• [PATCH RESEND v2 3/4] arm64: dts: qcom: qcs615: Add gpu and gmu nodes   Konrad Dybcio
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Konrad Dybcio
• [PATCH] drm/msm: UAPI error reporting   Konrad Dybcio
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Konrad Dybcio
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Konrad Dybcio
• [PATCH 0/2] Print GMU version at boot on >A630   Konrad Dybcio
• [PATCH 1/2] drm/msm: registers: Add GMU FW version register   Konrad Dybcio
• [PATCH 2/2] drm/msm/a6xx: Print GMU core firmware version at boot   Konrad Dybcio
• [PATCH v3] drm/msm/a6xx: Add support for Adreno 612   Konrad Dybcio
• [PATCH v2 2/3] dt-bindings: opp: Add v2-qcom-adreno vendor bindings   Konrad Dybcio
• [PATCH v6 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Konrad Dybcio
• [PATCH v6 6/7] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU   Konrad Dybcio
• [PATCH v6 7/7] arm64: qcom: dts: sm8650: add interconnect and opp-peak-kBps for GPU   Konrad Dybcio
• [PATCH v6 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   Konrad Dybcio
• [PATCH v6 3/7] drm/msm: adreno: dynamically generate GMU bw table   Konrad Dybcio
• [PATCH v2 2/3] dt-bindings: opp: Add v2-qcom-adreno vendor bindings   Konrad Dybcio
• [PATCH v3 4/6] dt-bindings: opp: Add v2-qcom-adreno vendor bindings   Konrad Dybcio
• [PATCH v3 3/6] drm/msm/adreno: Add module param to disable ACD   Konrad Dybcio
• [PATCH] drm/ci: add kms_cursor_legacy at torture-bo to apq8016 flakes   Helen Mae Koike Fornazier
• [PATCH] drm/ci: add kms_cursor_legacy at torture-bo to apq8016 flakes   Helen Mae Koike Fornazier
• [PATCH 09/10] drm/sti: hdmi: use eld_mutex to protect access to connector->eld   Raphaël Gallais-Pou
• [PATCH 13/45] drm/msm/dp: separate dp_display_prepare() into its own API   Stephan Gerhold
• [PATCH v2 1/2] drm/msm/dpu1: don't choke on disabling the writeback connector   Johan Hovold
• [PATCH v3] drm/msm/dpu1: don't choke on disabling the writeback connector   Johan Hovold
• [PATCH v3] drm/msm/dpu1: don't choke on disabling the writeback connector   Johan Hovold
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Johan Hovold
• [PATCH v2 4/4] drm/msm/dp: Add support for LTTPR handling   Johan Hovold
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Johan Hovold
• [PATCH 7/8] drm/msm/dpu: link DSPP_2/_3 blocks on X1E80100   Johan Hovold
• [PATCH 7/8] drm/msm/dpu: link DSPP_2/_3 blocks on X1E80100   Johan Hovold
• [PATCH] drm/msm: Check return value of of_dma_configure()   Sui Jingfeng
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Pavan Kondeti
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Pavan Kondeti
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Pavan Kondeti
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Pavan Kondeti
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Pavan Kondeti
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Pavan Kondeti
• [PATCH v2] dt-bindings: display/msm: qcom, sa8775p-mdss: fix the example   Krzysztof Kozlowski
• [PATCH 2/4] dt-bindings: display: msm: dp-controller: document clock parents better   Krzysztof Kozlowski
• [PATCH 1/4] dt-bindings: display: msm: dp-controller: document pixel clock stream   Krzysztof Kozlowski
• [PATCH 3/4] dt-bindings: display/msm: add stream 1 pixel clock binding   Krzysztof Kozlowski
• [PATCH 2/4] dt-bindings: display: msm: dp-controller: document clock parents better   Krzysztof Kozlowski
• [PATCH 2/4] dt-bindings: display: msm: dp-controller: document clock parents better   Krzysztof Kozlowski
• [PATCH v4 2/9] dt-bindings: display/msm: dsi-controller-main: Document SM6150   Krzysztof Kozlowski
• [PATCH v4 3/9] dt-bindings: display/msm: Add SM6150 MDSS & DPU   Krzysztof Kozlowski
• [PATCH 4/4] dt-bindings: display: msm: dp: update maintainer entry   Krzysztof Kozlowski
• [PATCH RESEND v2 1/4] dt-bindings: display/msm: gpu: Document A612 GPU   Krzysztof Kozlowski
• [PATCH RESEND v2 2/4] dt-bindings: display/msm/gmu: Document RGMU   Krzysztof Kozlowski
• [PATCH v2 2/3] dt-bindings: opp: Add v2-qcom-adreno vendor bindings   Krzysztof Kozlowski
• [PATCH v2 0/5] Display enablement changes for Qualcomm QCS8300 platform   Krzysztof Kozlowski
• [PATCH v2 2/5] dt-bindings: display: msm: dp-controller: document QCS8300 compatible   Krzysztof Kozlowski
• [PATCH v2 1/5] dt-bindings: display/msm: Document the DPU for QCS8300   Krzysztof Kozlowski
• [PATCH v2 4/5] dt-bindings: phy: Add eDP PHY compatible for QCS8300   Krzysztof Kozlowski
• [PATCH 6.1 769/772] drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer needed   Greg Kroah-Hartman
• [PATCH 0/3] drm/msm/dp: Fix and utilize TPG with a debugfs   Abhinav Kumar
• [PATCH 1/3] drm/msm/dp: account for widebus in msm_dp_catalog_panel_tpg_enable()   Abhinav Kumar
• [PATCH 2/3] drm/msm/dp: do not touch the MMSS_DP_INTF_CONFIG for tpg   Abhinav Kumar
• [PATCH 3/3] drm/msm/dp: add a debugfs node for using tpg   Abhinav Kumar
• [PATCH 0/4] drm/msm/dp: ST_DISPLAY_OFF hpd cleanup   Abhinav Kumar
• [PATCH 1/4] drm/msm/dp: remove redundant checks related to ST_DISPLAY_OFF in plug/irq_ipd handlers   Abhinav Kumar
• [PATCH 2/4] drm/msm/dp: remove redundant ST_DISPLAY_OFF checks in msm_dp_bridge_atomic_enable()   Abhinav Kumar
• [PATCH 3/4] drm/msm/dp: replace ST_DISPLAY_OFF with power_on in msm_dp_hpd_unplug_handle()   Abhinav Kumar
• [PATCH 4/4] drm/msm/dp: remove ST_DISPLAY_OFF as a hpd_state   Abhinav Kumar
• [PATCH v2 01/14] drm/msm/dp: set safe_to_exit_level before printing it   Abhinav Kumar
• [PATCH v2 02/14] drm/msm/dp: fix msm_dp_utils_pack_sdp_header interface   Abhinav Kumar
• [PATCH] drm/msm/hdmi: simplify code in pll_get_integloop_gain   Abhinav Kumar
• [PATCH] drm/msm/dpu: fix x1e80100 intf_6 underrun/vsync interrupt   Abhinav Kumar
• [PATCH 07/10] drm/msm/dp: use eld_mutex to protect access to connector->eld   Abhinav Kumar
• [PATCH 0/4] dt-bindings: msm/dp: add support for pixel clock to driver another stream   Abhinav Kumar
• [PATCH 1/4] dt-bindings: display: msm: dp-controller: document pixel clock stream   Abhinav Kumar
• [PATCH 2/4] dt-bindings: display: msm: dp-controller: document clock parents better   Abhinav Kumar
• [PATCH 3/4] dt-bindings: display/msm: add stream 1 pixel clock binding   Abhinav Kumar
• [PATCH 4/4] dt-bindings: display: msm: dp: update maintainer entry   Abhinav Kumar
• [PATCH v2] dt-bindings: display/msm: qcom, sa8775p-mdss: fix the example   Abhinav Kumar
• [PATCH 0/3] drm/msm/dp: Fix and utilize TPG with a debugfs   Abhinav Kumar
• [PATCH 1/3] drm/msm/dp: account for widebus in msm_dp_catalog_panel_tpg_enable()   Abhinav Kumar
• [PATCH 0/4] drm/msm/dp: ST_DISPLAY_OFF hpd cleanup   Abhinav Kumar
• [PATCH 1/4] drm/msm/dp: remove redundant checks related to ST_DISPLAY_OFF in plug/irq_ipd handlers   Abhinav Kumar
• [PATCH 2/4] drm/msm/dp: remove redundant ST_DISPLAY_OFF checks in msm_dp_bridge_atomic_enable()   Abhinav Kumar
• [PATCH 3/3] drm/msm/dp: add a debugfs node for using tpg   Abhinav Kumar
• [PATCH] drm/ci: add kms_cursor_legacy at torture-bo to apq8016 flakes   Abhinav Kumar
• [PATCH v2] drm/ci: add kms_cursor_legacy at torture-bo to apq8016 flakes   Abhinav Kumar
• [PATCH 07/10] drm/msm/dp: use eld_mutex to protect access to connector->eld   Abhinav Kumar
• [PATCH 00/45] drm/msm/dp: Add MST support for MSM chipsets   Abhinav Kumar
• [PATCH 01/45] drm/msm/dp: dont call dp_catalog_ctrl_mainlink_ctrl in dp_ctrl_configure_source_params()   Abhinav Kumar
• [PATCH 02/45] drm/msm/dp: disable the opp table request even for dp_ctrl_off_link()   Abhinav Kumar
• [PATCH 03/45] drm/msm/dp: fix the intf_type of MST interfaces   Abhinav Kumar
• [PATCH 04/45] drm/msm/dp: split msm_dp_panel_read_sink_caps() into two parts   Abhinav Kumar
• [PATCH 05/45] drm/msm/dp: add a helper to read mst caps for dp_panel   Abhinav Kumar
• [PATCH 06/45] drm/msm/dp: remove dp_display's dp_mode and use dp_panel's instead   Abhinav Kumar
• [PATCH 07/45] drm/msm/dp: break up dp_display_enable into two parts   Abhinav Kumar
• [PATCH 08/45] drm/msm/dp: re-arrange dp_display_disable() into functional parts   Abhinav Kumar
• [PATCH 09/45] drm/msm/dp: allow dp_ctrl stream APIs to use any panel passed to it   Abhinav Kumar
• [PATCH 10/45] drm/msm/dp: move the pixel clock control to its own API   Abhinav Kumar
• [PATCH 11/45] drm/msm/dp: split dp_ctrl_off() into stream and link parts   Abhinav Kumar
• [PATCH 12/45] drm/msm/dp: make bridge helpers use dp_display to allow re-use   Abhinav Kumar
• [PATCH 13/45] drm/msm/dp: separate dp_display_prepare() into its own API   Abhinav Kumar
• [PATCH 14/45] drm/msm/dp: introduce stream_id for each DP panel   Abhinav Kumar
• [PATCH 15/45] drm/msm/dp: convert dp_display_set_mode() to use dp_panel argument   Abhinav Kumar
• [PATCH 16/45] drm/msm/dp: add support for programming p1 register block   Abhinav Kumar
• [PATCH 17/45] drm/msm/dp: use stream_id to change offsets in dp_catalog   Abhinav Kumar
• [PATCH 18/45] drm/msm/dp: add support to send ACT packets for MST   Abhinav Kumar
• [PATCH 19/45] drm/msm/dp: add support to program mst support in mainlink   Abhinav Kumar
• [PATCH 20/45] drm/msm/dp: no need to update tu calculation for mst   Abhinav Kumar
• [PATCH 21/45] drm/msm/dp: add support for mst channel slot allocation   Abhinav Kumar
• [PATCH 22/45] drm/msm/dp: add support to send vcpf packets in dp controller   Abhinav Kumar
• [PATCH 23/45] drm/msm/dp: always program MST_FIFO_CONSTANT_FILL for MST   Abhinav Kumar
• [PATCH 24/45] drm/msm/dp: abstract out the dp_display stream helpers to accept a panel   Abhinav Kumar
• [PATCH 25/45] drm/msm/dp: move link related operations to dp_display_unprepare()   Abhinav Kumar
• [PATCH 26/45] drm/msm/dp: replace power_on with active_stream_cnt for dp_display   Abhinav Kumar
• [PATCH 27/45] drm/msm/dp: make the SST bridge disconnected when mst is active   Abhinav Kumar
• [PATCH 28/45] drm/msm/dp: add an API to initialize MST on sink side   Abhinav Kumar
• [PATCH 29/45] drm/msm/dp: skip reading the EDID for MST cases   Abhinav Kumar
• [PATCH 30/45] drm/msm/dp: add dp_display_get_panel() to initialize DP panel   Abhinav Kumar
• [PATCH 31/45] drm/msm/dp: add dp_mst_drm to manage DP MST bridge operations   Abhinav Kumar
• [PATCH 32/45] drm/msm/dp: add connector abstraction for DP MST   Abhinav Kumar
• [PATCH 33/45] drm/msm/dp: add irq hpd callback for dp mst   Abhinav Kumar
• [PATCH 34/45] drm/msm/dp: add support to re-use and clear the panel edid   Abhinav Kumar
• [PATCH 35/45] drm/msm/dp: add a mst session mutex to protect bridge ops   Abhinav Kumar
• [PATCH 36/45] drm/msm/dp: propagate hpd state changes to dp mst module   Abhinav Kumar
• [PATCH 37/45] drm/msm: add support for non-blocking commits   Abhinav Kumar
• [PATCH 38/45] drm/msm: initialize DRM MST encoders for DP controllers   Abhinav Kumar
• [PATCH 39/45] drm/msm/dp: initialize dp_mst module for each DP MST controller   Abhinav Kumar
• [PATCH 40/45] drm/msm: add a stream to intf map for DP controller   Abhinav Kumar
• [PATCH 41/45] drm/msm/dpu: use msm_dp_get_mst_intf_id() to get the intf id   Abhinav Kumar
• [PATCH 42/45] drm/msm/dp: mark ST_DISCONNECTED only if all streams are disabled   Abhinav Kumar
• [PATCH 43/45] drm/msm/dp: populate the max_streams for sa8775 mst controller   Abhinav Kumar
• [PATCH 44/45] arm64: dts: qcom: add mst support for pixel stream clk for DP0   Abhinav Kumar
• [PATCH 45/45] arm64: dts: qcom: add mst support for pixel 1 stream clk for DP1   Abhinav Kumar
• [PATCH] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Abhinav Kumar
• [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes   Abhinav Kumar
• [PATCH v3 5/9] drm/msm/dpu: Add SM6150 support   Abhinav Kumar
• [PATCH v4] drm/msm/dpu1: don't choke on disabling the writeback connector   Abhinav Kumar
• [PATCH] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Abhinav Kumar
• [PATCH v2] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Abhinav Kumar
• [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes   Abhinav Kumar
• [PATCH] drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp   Abhinav Kumar
• [PATCH v3] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Abhinav Kumar
• [PATCH v2] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Abhinav Kumar
• [PATCH] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Abhinav Kumar
• [PATCH v4] drm/msm/dpu1: don't choke on disabling the writeback connector   Abhinav Kumar
• [PATCH v4] drm/msm/dpu1: don't choke on disabling the writeback connector   Abhinav Kumar
• [PATCH v4] drm/msm/dpu1: don't choke on disabling the writeback connector   Abhinav Kumar
• [PATCH v2] drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp   Abhinav Kumar
• [PATCH] drm/ci: add kms_cursor_legacy at torture-bo to apq8016 flakes   Abhinav Kumar
• [PATCH v7 2/3] drm/msm/dpu: allow using two SSPP blocks for a single plane   Abhinav Kumar
• [PATCH v7 2/3] drm/msm/dpu: allow using two SSPP blocks for a single plane   Abhinav Kumar
• [PATCH v3 03/14] drm/msm/dp: drop msm_dp_panel_dump_regs() and msm_dp_catalog_dump_regs()   Abhinav Kumar
• [PATCH v3 01/14] drm/msm/dp: set safe_to_exit_level before printing it   Abhinav Kumar
• [PATCH v3 02/14] drm/msm/dp: fix msm_dp_utils_pack_sdp_header interface   Abhinav Kumar
• [PATCH v3 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Abhinav Kumar
• [PATCH v3 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Abhinav Kumar
• [PATCH v3 13/14] drm/msm/dp: drop struct msm_dp_panel_in   Abhinav Kumar
• [PATCH v3 01/14] drm/msm/dp: set safe_to_exit_level before printing it   Abhinav Kumar
• [PATCH v3 01/14] drm/msm/dp: set safe_to_exit_level before printing it   Abhinav Kumar
• [PATCH v3 13/14] drm/msm/dp: drop struct msm_dp_panel_in   Abhinav Kumar
• [PATCH v3 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Abhinav Kumar
• [PATCH v3 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Abhinav Kumar
• [PATCH v3 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Abhinav Kumar
• [PATCH] drm/msm/dpu: Filter modes based on adjusted mode clock   Abhinav Kumar
• [PATCH] drm/ci: add kms_cursor_legacy at torture-bo to apq8016 flakes   Abhinav Kumar
• [PATCH v3 09/14] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Abhinav Kumar
• [PATCH v3 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Abhinav Kumar
• [PATCH v2 02/22] drm: Add valid clones check   Abhinav Kumar
• [PATCH] drm/ci: add kms_cursor_legacy at torture-bo to apq8016 flakes   Abhinav Kumar
• [PATCH] drm/msm: fix -Wformat-security warnings   Abhinav Kumar
• [PATCH] drm/msm/dpu: Filter modes based on adjusted mode clock   Abhinav Kumar
• [PATCH] drm/msm/dpu: correct LM pairing for SM6150   Abhinav Kumar
• [PATCH v4 02/16] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Abhinav Kumar
• [PATCH v4 03/16] drm/msm/dp: drop obsolete audio headers access through catalog   Abhinav Kumar
• [PATCH v4 05/16] drm/msm/dp: stop passing panel to msm_dp_audio_get()   Abhinav Kumar
• [PATCH v4 06/16] drm/msm/dp: split MMSS_DP_DSC_DTO register write to a separate function   Abhinav Kumar
• [PATCH v4 07/16] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Abhinav Kumar
• [PATCH v3 04/14] drm/msm/dp: pull I/O data out of msm_dp_catalog_private()   Abhinav Kumar
• [PATCH v4 15/16] drm/msm/dp: read hw revision only once   Abhinav Kumar
• [PATCH 1/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8150   Abhinav Kumar
• [PATCH 2/8] drm/msm/dpu: link DSPP_2/_3 blocks on SC8180X   Abhinav Kumar
• [PATCH 3/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8250   Abhinav Kumar
• [PATCH 4/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8350   Abhinav Kumar
• [PATCH 5/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8550   Abhinav Kumar
• [PATCH 6/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8650   Abhinav Kumar
• [PATCH 7/8] drm/msm/dpu: link DSPP_2/_3 blocks on X1E80100   Abhinav Kumar
• [PATCH 1/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8150   Abhinav Kumar
• [PATCH v4 02/16] drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packets   Abhinav Kumar
• [PATCH 8/8] drm/msm/dpu: provide DSPP and correct LM config for SDM670   Abhinav Kumar
• [PATCH 0/8] drm/msm/dpu: catalog corrections   Abhinav Kumar
• [PATCH v4 06/16] drm/msm/dp: split MMSS_DP_DSC_DTO register write to a separate function   Abhinav Kumar
• [PATCH] drm/msm/dpu: correct LM pairing for SM6150   Abhinav Kumar
• [PATCH v4 08/25] drm/msm/dpu: fill CRTC resources in dpu_crtc.c   Abhinav Kumar
• [PATCH v4 07/25] drm/msm/dpu: move resource allocation to CRTC   Abhinav Kumar
• [PATCH v4 01/25] drm: add clone mode check for CRTC   Abhinav Kumar
• [PATCH v4 02/25] drm/tests: Add test for drm_crtc_in_clone_mode()   Abhinav Kumar
• [PATCH v4 05/25] drm/msm/dpu: get rid of struct dpu_rm_requirements   Abhinav Kumar
• [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag   Luoxi Li
• [RFC] drm/msm: Add UABI to request perfcntr usage   Antonino Maniscalco
• [RFC] drm/msm: Add UABI to request perfcntr usage   Antonino Maniscalco
• [PATCH 2/5] dt-bindings: display/msm: Document the DPU for QCS8300   Yongxing Mou
• [PATCH 3/5] drm/msm: mdss: Add QCS8300 support   Yongxing Mou
• [PATCH 4/5] drm/msm/dpu: Add QCS8300 support   Yongxing Mou
• [PATCH 3/5] drm/msm: mdss: Add QCS8300 support   Yongxing Mou
• [PATCH v2 0/5] Display enablement changes for Qualcomm QCS8300 platform   Yongxing Mou
• [PATCH v2 1/5] dt-bindings: display/msm: Document the DPU for QCS8300   Yongxing Mou
• [PATCH v2 2/5] dt-bindings: display: msm: dp-controller: document QCS8300 compatible   Yongxing Mou
• [PATCH v2 3/5] dt-bindings: display/msm: Document MDSS on QCS8300   Yongxing Mou
• [PATCH v2 4/5] dt-bindings: phy: Add eDP PHY compatible for QCS8300   Yongxing Mou
• [PATCH v2 5/5] drm/msm: mdss: Add QCS8300 support   Yongxing Mou
• [PATCH] iommu/arm-smmu-qcom: Only enable stall on smmu-v2   Robin Murphy
• [PATCH v3 00/15] (no cover subject)   Jun Nie
• [PATCH v3 01/15] drm/msm/dpu: Do not fix number of DSC   Jun Nie
• [PATCH v3 02/15] drm/msm/dpu: configure DSC per number in use   Jun Nie
• [PATCH v3 03/15] drm/msm/dpu: polish log for resource allocation   Jun Nie
• [PATCH v3 04/15] drm/msm/dpu: decide right side per last bit   Jun Nie
• [PATCH v3 05/15] drm/msm/dpu: fix mixer number counter on allocation   Jun Nie
• [PATCH v3 06/15] drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocation   Jun Nie
• [PATCH v3 07/15] drm/msm/dpu: bind correct pingpong for quad pipe   Jun Nie
• [PATCH v3 08/15] drm/msm/dpu: handle pipes as array   Jun Nie
• [PATCH v3 09/15] drm/msm/dpu: split PIPES_PER_STAGE definition per plane and mixer   Jun Nie
• [PATCH v3 10/15] drm/msm/dpu: Add pipe as trace argument   Jun Nie
• [PATCH v3 11/15] drm/msm/dpu: blend pipes per mixer pairs config   Jun Nie
• [PATCH v3 12/15] drm/msm/dpu: support plane splitting in quad-pipe case   Jun Nie
• [PATCH v3 13/15] drm/msm/dpu: Support quad-pipe in SSPP checking   Jun Nie
• [PATCH v3 14/15] drm/msm/dpu: support SSPP assignment for quad-pipe case   Jun Nie
• [PATCH v3 15/15] drm/msm/dpu: Enable quad-pipe for DSC and dual-DSI case   Jun Nie
• [PATCH v3 00/15] drm/msm/dpu: Support quad pipe with dual-DSI   Jun Nie
• [PATCH v3 10/15] drm/msm/dpu: Add pipe as trace argument   Jun Nie
• [PATCH 01/10] drm/connector: add mutex to protect ELD from concurrent access   Jani Nikula
• [PATCH 06/10] drm/i915/audio: use eld_mutex to protect access to connector->eld   Jani Nikula
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Jani Nikula
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Jani Nikula
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Jani Nikula
• [PATCH v2 1/2] drm/msm/adreno: Introduce ADRENO_QUIRK_NO_SYSCACHE   Akhil P Oommen
• [PATCH v3 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   Akhil P Oommen
• [PATCH v2 1/2] drm/msm/adreno: Introduce ADRENO_QUIRK_NO_SYSCACHE   Akhil P Oommen
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Akhil P Oommen
• [PATCH v4 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   Akhil P Oommen
• [PATCH v4 3/7] drm/msm: adreno: dynamically generate GMU bw table   Akhil P Oommen
• [PATCH v4 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Akhil P Oommen
• [PATCH v4 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750   Akhil P Oommen
• [PATCH v4 6/7] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU   Akhil P Oommen
• [PATCH v4 6/7] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU   Akhil P Oommen
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Akhil P Oommen
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Akhil P Oommen
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Akhil P Oommen
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Akhil P Oommen
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Akhil P Oommen
• [PATCH 2/3] arm64: dts: qcom: qcs615: Add gpu and gmu nodes   Akhil P Oommen
• [RFC] drm/msm: Add UABI to request perfcntr usage   Akhil P Oommen
• [PATCH v2 0/4] Devicetree changes for QCS615's GPU   Akhil P Oommen
• [PATCH v2 1/4] dt-bindings: display/msm: gpu: Document A612 GPU   Akhil P Oommen
• [PATCH v2 2/4] dt-bindings: display/msm/gmu: Document RGMU   Akhil P Oommen
• [PATCH v2 3/4] arm64: dts: qcom: qcs615: Add gpu and gmu nodes   Akhil P Oommen
• [PATCH v2 4/4] arm64: dts: qcom: qcs615-ride: Enable Adreno 612 GPU   Akhil P Oommen
• [PATCH v2 0/4] Devicetree changes for QCS615's GPU   Akhil P Oommen
• [PATCH RESEND v2 00/26] Devicetree changes for QCS615's GPU   Akhil P Oommen
• [PATCH RESEND v2 01/26] dt-bindings: qcom,pdc: document QCS615 Power Domain Controller   Akhil P Oommen
• [PATCH RESEND v2 0/4] Devicetree changes for QCS615's GPU   Akhil P Oommen
• [PATCH RESEND v2 1/4] dt-bindings: display/msm: gpu: Document A612 GPU   Akhil P Oommen
• [PATCH RESEND v2 2/4] dt-bindings: display/msm/gmu: Document RGMU   Akhil P Oommen
• [PATCH RESEND v2 3/4] arm64: dts: qcom: qcs615: Add gpu and gmu nodes   Akhil P Oommen
• [PATCH RESEND v2 4/4] arm64: dts: qcom: qcs615-ride: Enable Adreno 612 GPU   Akhil P Oommen
• [PATCH RESEND v2 01/26] dt-bindings: qcom,pdc: document QCS615 Power Domain Controller   Akhil P Oommen
• [PATCH RESEND v2 00/26] Devicetree changes for QCS615's GPU   Akhil P Oommen
• [PATCH v3] drm/msm/a6xx: Add support for Adreno 612   Akhil P Oommen
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Akhil P Oommen
• [PATCH v5 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750   Akhil P Oommen
• [PATCH v2 3/4] arm64: dts: qcom: qcs615: Add gpu and gmu nodes   Akhil P Oommen
• [PATCH v2 2/4] dt-bindings: display/msm/gmu: Document RGMU   Akhil P Oommen
• [RFC] drm/msm: Add UABI to request perfcntr usage   Akhil P Oommen
• [RFC] drm/msm: Add UABI to request perfcntr usage   Akhil P Oommen
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Akhil P Oommen
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   Akhil P Oommen
• [RFC] drm/msm: Add UABI to request perfcntr usage   Akhil P Oommen
• [RFC] drm/msm: Add UABI to request perfcntr usage   Akhil P Oommen
• [RFC] drm/msm: Add UABI to request perfcntr usage   Akhil P Oommen
• [PATCH] iommu/arm-smmu-qcom: Only enable stall on smmu-v2   Akhil P Oommen
• [PATCH v6 3/7] drm/msm: adreno: dynamically generate GMU bw table   Akhil P Oommen
• [RFC] drm/msm: Add UABI to request perfcntr usage   Akhil P Oommen
• [PATCH v3] drm/msm/a6xx: Add support for Adreno 612   Akhil P Oommen
• [PATCH v2 2/3] dt-bindings: opp: Add v2-qcom-adreno vendor bindings   Akhil P Oommen
• [PATCH v3 0/6] Support for GPU ACD feature on Adreno X1-85   Akhil P Oommen
• [PATCH v3 1/6] drm/msm/adreno: Add support for ACD   Akhil P Oommen
• [PATCH v3 2/6] drm/msm: a6x: Rework qmp_get() error handling   Akhil P Oommen
• [PATCH v3 3/6] drm/msm/adreno: Add module param to disable ACD   Akhil P Oommen
• [PATCH v3 4/6] dt-bindings: opp: Add v2-qcom-adreno vendor bindings   Akhil P Oommen
• [PATCH v3 5/6] arm64: dts: qcom: x1e80100: Add ACD levels for GPU   Akhil P Oommen
• [PATCH v3 6/6] arm64: dts: qcom: x1e80100: Add OPPs up to Turbo L3 for GPU   Akhil P Oommen
• [PATCH v2 5/5] drm/connector: make mode_valid take a const struct drm_display_mode   Lyude Paul
• [PATCH v2 1/5] drm/encoder_slave: make mode_valid accept const struct drm_display_mode   Lyude Paul
• [PATCH v2 2/4] drm/nouveau/dp: Use the generic helper to control LTTPR transparent mode   Lyude Paul
• [PATCH 0/1] Expose UCHE_TRAP_BASE value via uapi   Danylo Piliaiev
• [PATCH 1/1] drm/msm: Expose uche trap base via uapi   Danylo Piliaiev
• [PATCH v2 0/1] Expose UCHE_TRAP_BASE value via uapi   Danylo Piliaiev
• [PATCH v2 1/1] drm/msm: Expose uche trap base via uapi   Danylo Piliaiev
• [PATCH] drm/ci: add kms_cursor_legacy at torture-bo to apq8016 flakes   Vignesh Raman
• [PATCH] drm/ci: add kms_cursor_legacy at torture-bo to apq8016 flakes   Vignesh Raman
• [PATCH] drm/ci: add kms_cursor_legacy at torture-bo to apq8016 flakes   Vignesh Raman
• [PATCH 00/10] drm/connector: add eld_mutex to protect connector->eld   Maxime Ripard
• [PATCH 00/10] drm/connector: add eld_mutex to protect connector->eld   Maxime Ripard
• [PATCH v2 02/22] drm: Add valid clones check   Maxime Ripard
• [PATCH v2 00/10] drm/connector: add eld_mutex to protect connector->eld   Maxime Ripard
• [PATCH v4 04/25] drm/tests: Add test for drm_atomic_helper_check_modeset()   Maxime Ripard
• [PATCH v4 01/25] drm: add clone mode check for CRTC   Maxime Ripard
• [PATCH v4 02/25] drm/tests: Add test for drm_crtc_in_clone_mode()   Maxime Ripard
• [PATCH v4 03/25] drm: Add valid clones check   Maxime Ripard
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Mark Rutland
• [PATCH v10 1/4] iommu/io-pgtable-arm: Make pgtable walker more generic   Mostafa Saleh
• [PATCH v10 2/4] iommu/io-pgtable-arm: Re-use the pgtable walk for iova_to_phys   Mostafa Saleh
• [PATCH v10 3/4] iommu/io-pgtable-arm: Add way to debug pgtable walk   Mostafa Saleh
• [PATCH 0/4] dt-bindings: msm/dp: add support for pixel clock to driver another stream   Marijn Suijten
• [PATCH 0/3] drm/msm/dp: Fix and utilize TPG with a debugfs   Marijn Suijten
• [PATCH] drm/msm: UAPI error reporting   Tvrtko Ursulin
• [PATCH RFC 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH RFC 2/4] drm/nouveau/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH RFC 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH v2 0/4] drm/dp: Rework LTTPR transparent mode handling and add support to msm driver   Abel Vesa
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Abel Vesa
• [PATCH v2 2/4] drm/nouveau/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH v2 3/4] drm/i915/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH v2 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Abel Vesa
• [PATCH v2 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Abel Vesa
• [PATCH v2 02/22] drm: Add valid clones check   Simona Vetter
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Harry Wentland
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Harry Wentland
• [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration   Xiangxu Yin
• [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes   Xiangxu Yin
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Xiangxu Yin
• [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes   Xiangxu Yin
• [PATCH 7/8] drm/msm/dp: Retry Link Training 2 with lower pattern   Xiangxu Yin
• [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration   Xiangxu Yin
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Xiangxu Yin
• [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes   Xiangxu Yin
• [PATCH v3] drm/msm/dpu: filter out too wide modes if no 3dmux is present   Xiangxu Yin
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Xiangxu Yin
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Xiangxu Yin
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Xiangxu Yin
• [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration   Xiangxu Yin
• [PATCH v4 0/9] Add display support for QCS615 platform   Fange Zhang
• [PATCH v4 1/9] dt-bindings: display/msm: Add SM6150 DSI phy   Fange Zhang
• [PATCH v4 2/9] dt-bindings: display/msm: dsi-controller-main: Document SM6150   Fange Zhang
• [PATCH v4 3/9] dt-bindings: display/msm: Add SM6150 MDSS & DPU   Fange Zhang
• [PATCH v4 4/9] drm/msm: mdss: Add SM6150 support   Fange Zhang
• [PATCH v4 5/9] drm/msm/dpu: Add SM6150 support   Fange Zhang
• [PATCH v4 6/9] drm/msm/dsi: Add dsi phy support for SM6150   Fange Zhang
• [PATCH v4 7/9] drm/msm/dsi: Add support for SM6150   Fange Zhang
• [PATCH v4 8/9] arm64: dts: qcom: Add display support for QCS615   Fange Zhang
• [PATCH v4 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board   Fange Zhang
• [PATCH v2 02/22] drm: Add valid clones check   Jessica Zhang
• [PATCH v4] drm/msm/dpu1: don't choke on disabling the writeback connector   Jessica Zhang
• [PATCH] drm/msm/dpu: Filter modes based on adjusted mode clock   Jessica Zhang
• [PATCH v2 02/22] drm: Add valid clones check   Jessica Zhang
• [PATCH v2 02/22] drm: Add valid clones check   Jessica Zhang
• [PATCH v4 00/25] drm/msm/dpu: Add Concurrent Writeback Support for DPU 10.x+   Jessica Zhang
• [PATCH v4 01/25] drm: add clone mode check for CRTC   Jessica Zhang
• [PATCH v4 02/25] drm/tests: Add test for drm_crtc_in_clone_mode()   Jessica Zhang
• [PATCH v4 03/25] drm: Add valid clones check   Jessica Zhang
• [PATCH v4 04/25] drm/tests: Add test for drm_atomic_helper_check_modeset()   Jessica Zhang
• [PATCH v4 05/25] drm/msm/dpu: get rid of struct dpu_rm_requirements   Jessica Zhang
• [PATCH v4 06/25] drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocation   Jessica Zhang
• [PATCH v4 07/25] drm/msm/dpu: move resource allocation to CRTC   Jessica Zhang
• [PATCH v4 08/25] drm/msm/dpu: fill CRTC resources in dpu_crtc.c   Jessica Zhang
• [PATCH v4 09/25] drm/msm/dpu: Add CWB entry to catalog for SM8650   Jessica Zhang
• [PATCH v4 10/25] drm/msm/dpu: Specify dedicated CWB pingpong blocks   Jessica Zhang
• [PATCH v4 11/25] drm/msm/dpu: add devcoredumps for cwb registers   Jessica Zhang
• [PATCH v4 12/25] drm/msm/dpu: Add dpu_hw_cwb abstraction for CWB block   Jessica Zhang
• [PATCH v4 13/25] drm/msm/dpu: add CWB support to dpu_hw_wb   Jessica Zhang
• [PATCH v4 14/25] drm/msm/dpu: Add RM support for allocating CWB   Jessica Zhang
• [PATCH v4 15/25] drm/msm/dpu: Add CWB to msm_display_topology   Jessica Zhang
• [PATCH v4 16/25] drm/msm/dpu: Require modeset if clone mode status changes   Jessica Zhang
• [PATCH v4 17/25] drm/msm/dpu: Fail atomic_check if CWB and CDM are enabled   Jessica Zhang
• [PATCH v4 18/25] drm/msm/dpu: Reserve resources for CWB   Jessica Zhang
• [PATCH v4 19/25] drm/msm/dpu: Configure CWB in writeback encoder   Jessica Zhang
• [PATCH v4 20/25] drm/msm/dpu: Support CWB in dpu_hw_ctl   Jessica Zhang
• [PATCH v4 21/25] drm/msm/dpu: Adjust writeback phys encoder setup for CWB   Jessica Zhang
• [PATCH v4 22/25] drm/msm/dpu: Start frame done timer after encoder kickoff   Jessica Zhang
• [PATCH v4 23/25] drm/msm/dpu: Skip trigger flush and start for CWB   Jessica Zhang
• [PATCH v4 24/25] drm/msm/dpu: Reorder encoder kickoff for CWB   Jessica Zhang
• [PATCH v4 25/25] drm/msm/dpu: Set possible clones for all encoders   Jessica Zhang
• [PATCH v2 0/5] drm/msm: add a display mmu fault handler   Jessica Zhang
• [PATCH v2 1/5] drm/msm: register a fault handler for display mmu faults   Jessica Zhang
• [PATCH v2 2/5] drm/msm/iommu: rename msm_fault_handler to msm_gpu_fault_handler   Jessica Zhang
• [PATCH v2 3/5] drm/msm/iommu: introduce msm_iommu_disp_new() for msm_kms   Jessica Zhang
• [PATCH v2 4/5] drm/msm: switch msm_kms to use msm_iommu_disp_new()   Jessica Zhang
• [PATCH v2 5/5] drm/msm/dpu: rate limit snapshot capture for mmu faults   Jessica Zhang
• [PATCH v2 5/5] drm/msm/dpu: rate limit snapshot capture for mmu faults   Jessica Zhang
• [PATCH v4 00/25] drm/msm/dpu: Add Concurrent Writeback Support for DPU 10.x+   Jessica Zhang
• [PATCH v4 18/25] drm/msm/dpu: Reserve resources for CWB   Jessica Zhang
• [PATCH v4 18/25] drm/msm/dpu: Reserve resources for CWB   Jessica Zhang
• [PATCH v4 17/25] drm/msm/dpu: Fail atomic_check if CWB and CDM are enabled   Jessica Zhang
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Marc Zyngier
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Marc Zyngier
• [PATCH] drm/msm/a6xx: Skip gpu secure fw load in EL2 mode   Marc Zyngier
• [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU   neil.armstrong at linaro.org
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   neil.armstrong at linaro.org
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   neil.armstrong at linaro.org
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   neil.armstrong at linaro.org
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   neil.armstrong at linaro.org
• [PATCH v5 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index   neil.armstrong at linaro.org
• [PATCH v4] drm/msm/dpu1: don't choke on disabling the writeback connector   neil.armstrong at linaro.org
• [PATCH v3 1/6] drm/msm/adreno: Add support for ACD   neil.armstrong at linaro.org
• Patch "drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer needed" has been added to the 6.1-stable tree   gregkh at linuxfoundation.org
• [PATCH v5 11/11] drm/msm/dp: drop the msm_dp_catalog module   kernel test robot
• [PATCH v3 5/9] drm/msm/dpu: Add SM6150 support   fange zhang
• [PATCH v4 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board   fange zhang
• [PATCH v4 0/9] Add display support for QCS615 platform   fange zhang
• [PATCH v4 5/9] drm/msm/dpu: Add SM6150 support   fange zhang
• [PATCH v4 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board   fange zhang
• [PATCH v4 0/9] Add display support for QCS615 platform   fange zhang
• [PATCH v4 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board   fange zhang

Last message date: Tue Dec 31 14:04:22 UTC 2024
Archived on: Tue Dec 31 15:23:27 UTC 2024

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...