[PATCH 31/45] drm/msm/dp: add dp_mst_drm to manage DP MST bridge operations
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Dec 6 10:12:29 UTC 2024
On Thu, Dec 05, 2024 at 08:32:02PM -0800, Abhinav Kumar wrote:
> Add a new file dp_mst_drm to manage the DP MST bridge operations
> similar to the dp_drm file which manages the SST bridge operations.
> Each MST encoder creates one bridge and each bridge is bound to its
> own dp_panel abstraction to manage the operations of its pipeline.
>
> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> ---
> drivers/gpu/drm/msm/Makefile | 3 +-
> drivers/gpu/drm/msm/dp/dp_display.h | 2 +
> drivers/gpu/drm/msm/dp/dp_mst_drm.c | 490 ++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/msm/dp/dp_mst_drm.h | 102 ++++++++
> 4 files changed, 596 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> index f274d9430cc311405f890074c1466ffe2ec45ac9..b1e01b3123d9afc4818f059c5d4e7ca70dca3754 100644
> --- a/drivers/gpu/drm/msm/Makefile
> +++ b/drivers/gpu/drm/msm/Makefile
> @@ -142,7 +142,8 @@ msm-display-$(CONFIG_DRM_MSM_DP)+= dp/dp_aux.o \
> dp/dp_link.o \
> dp/dp_panel.o \
> dp/dp_audio.o \
> - dp/dp_utils.o
> + dp/dp_utils.o \
> + dp/dp_mst_drm.o
>
> msm-display-$(CONFIG_DRM_MSM_HDMI_HDCP) += hdmi/hdmi_hdcp.o
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
> index 6ab14e969bce0fd07b3a550bae17e99652479232..a5d4893f689c6afbbe622c9b7dfa98d23d754831 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.h
> +++ b/drivers/gpu/drm/msm/dp/dp_display.h
> @@ -7,6 +7,7 @@
> #define _DP_DISPLAY_H_
>
> #include "dp_panel.h"
> +#include "dp_mst_drm.h"
> #include <sound/hdmi-codec.h>
> #include "disp/msm_disp_snapshot.h"
>
> @@ -26,6 +27,7 @@ struct msm_dp {
> bool is_edp;
> bool internal_hpd;
>
> + struct msm_dp_mst *msm_dp_mst;
> hdmi_codec_plugged_cb plugged_cb;
>
> struct msm_dp_audio *msm_dp_audio;
> diff --git a/drivers/gpu/drm/msm/dp/dp_mst_drm.c b/drivers/gpu/drm/msm/dp/dp_mst_drm.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..e66bd1e565aeb4da3d636eb5f4aa75504d60fd40
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_mst_drm.c
> @@ -0,0 +1,490 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
> + */
> +
> +/*
> + * Copyright © 2014 Red Hat.
> + *
> + * Permission to use, copy, modify, distribute, and sell this software and its
> + * documentation for any purpose is hereby granted without fee, provided that
> + * the above copyright notice appear in all copies and that both that copyright
> + * notice and this permission notice appear in supporting documentation, and
> + * that the name of the copyright holders not be used in advertising or
> + * publicity pertaining to distribution of the software without specific,
> + * written prior permission. The copyright holders make no representations
> + * about the suitability of this software for any purpose. It is provided "as
> + * is" without express or implied warranty.
> + *
> + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
> + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
> + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
> + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
> + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
> + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
> + * OF THIS SOFTWARE.
> + */
> +
> +#include "dp_mst_drm.h"
> +
> +static struct drm_private_state *msm_dp_mst_duplicate_bridge_state(struct drm_private_obj *obj)
> +{
> + struct msm_dp_mst_bridge_state *state;
> +
> + state = kmemdup(obj->state, sizeof(*state), GFP_KERNEL);
> + if (!state)
> + return NULL;
> +
> + __drm_atomic_helper_private_obj_duplicate_state(obj, &state->base);
> +
> + return &state->base;
> +}
> +
> +static void msm_dp_mst_destroy_bridge_state(struct drm_private_obj *obj,
> + struct drm_private_state *state)
> +{
> + struct msm_dp_mst_bridge_state *priv_state =
> + to_msm_dp_mst_bridge_priv_state(state);
> +
> + kfree(priv_state);
> +}
> +
> +static const struct drm_private_state_funcs msm_dp_mst_bridge_state_funcs = {
> + .atomic_duplicate_state = msm_dp_mst_duplicate_bridge_state,
> + .atomic_destroy_state = msm_dp_mst_destroy_bridge_state,
> +};
> +
> +/**
> + * dp_mst_find_vcpi_slots() - Find VCPI slots for this PBN value
> + * @mgr: manager to use
> + * @pbn: payload bandwidth to convert into slots.
> + *
> + * Calculate the number of VCPI slots that will be required for the given PBN
> + * value.
> + *
> + * RETURNS:
> + * The total slots required for this port, or error.
> + */
> +static int msm_dp_mst_find_vcpi_slots(struct drm_dp_mst_topology_mgr *mgr, int pbn)
> +{
> + int num_slots;
> + struct drm_dp_mst_topology_state *state;
> +
> + state = to_drm_dp_mst_topology_state(mgr->base.state);
> + num_slots = DIV_ROUND_UP(pbn, dfixed_trunc(state->pbn_div));
drm_dp_atomic_find_time_slots() uses slightly different maths here, with
the different precision. Can we use the data that is set by that function
instead (payload->time_slots)?
> +
> + /* max. time slots - one slot for MTP header */
> + if (num_slots > 63)
> + return -ENOSPC;
> + return num_slots;
> +}
> +
> +static void _msm_dp_mst_update_timeslots(struct msm_dp_mst *mst,
> + struct msm_dp_mst_bridge *mst_bridge,
> + struct drm_dp_mst_port *port)
> +{
> + int i;
> + struct msm_dp_mst_bridge *msm_dp_bridge;
> + struct drm_dp_mst_topology_state *mst_state;
> + struct drm_dp_mst_atomic_payload *payload;
> + int prev_start = 0;
> + int prev_slots = 0;
> +
> + mst_state = to_drm_dp_mst_topology_state(mst->mst_mgr.base.state);
> + payload = drm_atomic_get_mst_payload_state(mst_state, port);
> +
> + if (!payload) {
> + DRM_ERROR("mst bridge [%d] update_timeslots failed, null payload\n",
> + mst_bridge->id);
> + return;
> + }
> +
> + for (i = 0; i < mst->max_streams; i++) {
> + msm_dp_bridge = &mst->mst_bridge[i];
> + if (mst_bridge == msm_dp_bridge) {
> + /*
> + * When a payload was removed make sure to move any payloads after it
> + * to the left so all payloads are aligned to the left.
> + */
Please don't. drm_dp_remove_payload_part2() should take care of that for
us. What is the reason for caching the data if we have to manually
handle the cache?
> + if (payload->vc_start_slot < 0) {
> + // cache the payload
> + prev_start = msm_dp_bridge->start_slot;
> + prev_slots = msm_dp_bridge->num_slots;
> + msm_dp_bridge->pbn = 0;
> + msm_dp_bridge->start_slot = 1;
> + msm_dp_bridge->num_slots = 0;
> + msm_dp_bridge->vcpi = 0;
> + } else { //add payload
> + msm_dp_bridge->pbn = payload->pbn;
> + msm_dp_bridge->start_slot = payload->vc_start_slot;
> + msm_dp_bridge->num_slots = payload->time_slots;
> + msm_dp_bridge->vcpi = payload->vcpi;
> + }
> + }
> + }
> +
> + // Now commit all the updated payloads
> + for (i = 0; i < mst->max_streams; i++) {
> + msm_dp_bridge = &mst->mst_bridge[i];
> +
> + //Shift payloads to the left if there was a removed payload.
> + if (payload->vc_start_slot < 0 && msm_dp_bridge->start_slot > prev_start)
> + msm_dp_bridge->start_slot -= prev_slots;
> +
> + msm_dp_display_set_stream_info(mst->msm_dp, msm_dp_bridge->msm_dp_panel,
> + msm_dp_bridge->id, msm_dp_bridge->start_slot,
> + msm_dp_bridge->num_slots,
> + msm_dp_bridge->pbn, msm_dp_bridge->vcpi);
> + drm_dbg_dp(mst->msm_dp->drm_dev,
> + "conn:%d vcpi:%d start_slot:%d num_slots:%d, pbn:%d\n",
> + DP_MST_CONN_ID(msm_dp_bridge), msm_dp_bridge->vcpi,
> + msm_dp_bridge->start_slot,
> + msm_dp_bridge->num_slots, msm_dp_bridge->pbn);
> + }
> +}
> +
> +static int _msm_dp_mst_bridge_pre_enable_part1(struct msm_dp_mst_bridge *dp_bridge,
> + struct drm_bridge_state *bridge_state)
> +{
> + struct msm_dp *msm_dp = dp_bridge->display;
> + struct msm_dp_mst *mst = msm_dp->msm_dp_mst;
> + struct msm_dp_mst_connector *mst_conn = to_msm_dp_mst_connector(dp_bridge->connector);
> + struct drm_dp_mst_port *port = mst_conn->mst_port;
> + struct drm_dp_mst_topology_state *mst_state;
> + struct drm_dp_mst_atomic_payload *payload;
> + struct msm_dp_panel *dp_panel = mst_conn->dp_panel;
> + int pbn, slots;
> + int rc = 0;
> +
> + mst_state = drm_atomic_get_new_mst_topology_state(bridge_state->base.state,
> + &mst->mst_mgr);
> +
> + pbn = drm_dp_calc_pbn_mode(dp_panel->msm_dp_mode.drm_mode.clock,
> + (mst_conn->connector.display_info.bpc * 3) << 4);
> +
> + slots = msm_dp_mst_find_vcpi_slots(&mst->mst_mgr, pbn);
> +
> + drm_dbg_dp(msm_dp->drm_dev, "conn:%d pbn:%d, slots:%d\n", DP_MST_CONN_ID(dp_bridge),
> + pbn, slots);
> +
> + payload = drm_atomic_get_mst_payload_state(mst_state, port);
> + if (!payload || payload->time_slots <= 0) {
> + DRM_ERROR("time slots not allocated for conn:%d\n", DP_MST_CONN_ID(dp_bridge));
> + rc = -EINVAL;
> + return rc;
> + }
> +
> + drm_dp_mst_update_slots(mst_state, DP_CAP_ANSI_8B10B);
> +
> + rc = drm_dp_add_payload_part1(&mst->mst_mgr, mst_state, payload);
> + if (rc) {
> + DRM_ERROR("payload allocation failure for conn:%d\n", DP_MST_CONN_ID(dp_bridge));
> + return rc;
> + }
> +
> + _msm_dp_mst_update_timeslots(mst, dp_bridge, port);
> +
> + return rc;
> +}
> +
> +static void _msm_dp_mst_bridge_pre_enable_part2(struct msm_dp_mst_bridge *dp_bridge,
> + struct drm_bridge_state *bridge_state)
> +{
> + struct msm_dp *msm_dp = dp_bridge->display;
> + struct msm_dp_mst *mst = msm_dp->msm_dp_mst;
> + struct msm_dp_mst_connector *mst_conn = to_msm_dp_mst_connector(dp_bridge->connector);
> + struct drm_dp_mst_port *port = mst_conn->mst_port;
> + struct drm_dp_mst_topology_state *mst_state;
> + struct drm_dp_mst_atomic_payload *payload;
> +
> + drm_dp_check_act_status(&mst->mst_mgr);
> +
> + mst_state = to_drm_dp_mst_topology_state(mst->mst_mgr.base.state);
> + payload = drm_atomic_get_mst_payload_state(mst_state, port);
> +
> + if (!payload) {
> + DRM_ERROR("mst bridge [%d] null payload\n", dp_bridge->id);
> + return;
> + }
> +
> + if (!payload->port) {
> + DRM_ERROR("mst bridge [%d] null port\n", dp_bridge->id);
> + return;
> + }
> +
> + if (!payload->port->connector) {
> + DRM_ERROR("mst bridge [%d] part-2 failed, null connector\n",
> + dp_bridge->id);
> + return;
> + }
> +
> + if (payload->vc_start_slot == -1) {
> + DRM_ERROR("mst bridge [%d] part-2 failed, payload alloc part 1 failed\n",
> + dp_bridge->id);
> + return;
> + }
> +
> + drm_dp_add_payload_part2(&mst->mst_mgr, payload);
> +
> + drm_dbg_dp(msm_dp->drm_dev, "mst bridge [%d] _pre enable part-2 complete\n",
> + dp_bridge->id);
> +}
> +
> +static void _msm_dp_mst_bridge_pre_disable_part1(struct msm_dp_mst_bridge *dp_bridge,
> + struct drm_bridge_state *bridge_state)
> +{
> + struct msm_dp *msm_dp = dp_bridge->display;
> + struct msm_dp_mst *mst = msm_dp->msm_dp_mst;
> + struct msm_dp_mst_connector *mst_conn = to_msm_dp_mst_connector(dp_bridge->connector);
> + struct drm_dp_mst_port *port = mst_conn->mst_port;
> + struct drm_dp_mst_topology_state *old_mst_state;
> + struct drm_dp_mst_topology_state *new_mst_state;
> + const struct drm_dp_mst_atomic_payload *old_payload;
> + struct drm_dp_mst_atomic_payload *new_payload;
> +
> + old_mst_state = drm_atomic_get_old_mst_topology_state(bridge_state->base.state,
> + &mst->mst_mgr);
> +
> + new_mst_state = drm_atomic_get_new_mst_topology_state(bridge_state->base.state,
> + &mst->mst_mgr);
> +
> + old_payload = drm_atomic_get_mst_payload_state(old_mst_state, port);
> + new_payload = drm_atomic_get_mst_payload_state(new_mst_state, port);
> +
> + if (!old_payload || !new_payload) {
> + DRM_ERROR("mst bridge [%d] _pre disable part-1 failed, null payload\n",
> + dp_bridge->id);
> + return;
> + }
> +
> + drm_dp_remove_payload_part1(&mst->mst_mgr, new_mst_state, new_payload);
> + drm_dp_remove_payload_part2(&mst->mst_mgr, new_mst_state, old_payload, new_payload);
> +
> + _msm_dp_mst_update_timeslots(mst, dp_bridge, port);
> +
> + drm_dbg_dp(msm_dp->drm_dev, "mst bridge [%d] _pre disable part-1 complete\n",
> + dp_bridge->id);
> +}
> +
> +static void _msm_dp_mst_bridge_pre_disable_part2(struct msm_dp_mst_bridge *dp_bridge)
> +{
> + struct msm_dp *msm_dp = dp_bridge->display;
> + struct msm_dp_mst *mst = msm_dp->msm_dp_mst;
> +
> + drm_dp_check_act_status(&mst->mst_mgr);
> +
> + drm_dbg_dp(msm_dp->drm_dev, "mst bridge [%d] _pre disable part-2 complete\n",
> + dp_bridge->id);
> +}
> +
> +static void msm_dp_mst_bridge_atomic_pre_enable(struct drm_bridge *drm_bridge,
> + struct drm_bridge_state *old_bridge_state)
> +{
> + int rc = 0;
> + struct msm_dp_mst_bridge *bridge;
> + struct msm_dp *dp;
> + struct msm_dp_mst_bridge_state *msm_dp_bridge_state;
> +
> + if (!drm_bridge) {
> + DRM_ERROR("Invalid params\n");
> + return;
> + }
> +
> + bridge = to_msm_dp_mst_bridge(drm_bridge);
> + msm_dp_bridge_state = to_msm_dp_mst_bridge_state(bridge);
> + dp = bridge->display;
> +
> + /* to cover cases of bridge_disable/bridge_enable without modeset */
> + bridge->connector = msm_dp_bridge_state->connector;
> + bridge->msm_dp_panel = msm_dp_bridge_state->msm_dp_panel;
> +
> + if (!bridge->connector) {
> + DRM_ERROR("Invalid connector\n");
> + return;
> + }
> +
> + msm_dp_display_atomic_prepare(dp);
> +
> + rc = _msm_dp_mst_bridge_pre_enable_part1(bridge, old_bridge_state);
> + if (rc) {
> + DRM_ERROR("[%d] DP display pre-enable failed, rc=%d\n", bridge->id, rc);
> + msm_dp_display_unprepare(dp);
> + return;
> + }
> +
> + msm_dp_display_enable_helper(dp, bridge->msm_dp_panel);
> +
> + _msm_dp_mst_bridge_pre_enable_part2(bridge, old_bridge_state);
> +
> + drm_dbg_dp(dp->drm_dev, "conn:%d mode:%s fps:%d vcpi:%d slots:%d to %d\n",
> + DP_MST_CONN_ID(bridge), bridge->drm_mode.name,
> + drm_mode_vrefresh(&bridge->drm_mode),
> + bridge->vcpi, bridge->start_slot,
> + bridge->start_slot + bridge->num_slots);
> +}
> +
> +static void msm_dp_mst_bridge_atomic_disable(struct drm_bridge *drm_bridge,
> + struct drm_bridge_state *old_bridge_state)
> +{
> + struct msm_dp_mst_bridge *bridge;
> + struct msm_dp *dp;
> +
> + if (!drm_bridge) {
> + DRM_ERROR("Invalid params\n");
> + return;
> + }
> +
> + bridge = to_msm_dp_mst_bridge(drm_bridge);
> + if (!bridge->connector) {
> + DRM_ERROR("Invalid connector\n");
> + return;
> + }
> +
> + dp = bridge->display;
> +
> + _msm_dp_mst_bridge_pre_disable_part1(bridge, old_bridge_state);
> +
> + msm_dp_display_disable_helper(dp, bridge->msm_dp_panel);
> +
> + _msm_dp_mst_bridge_pre_disable_part2(bridge);
> +
> + drm_dbg_dp(dp->drm_dev, "mst bridge:%d conn:%d disable complete\n", bridge->id,
> + DP_MST_CONN_ID(bridge));
> +}
> +
> +static void msm_dp_mst_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
> + struct drm_bridge_state *old_bridge_state)
> +{
> + int conn = 0;
> + struct msm_dp_mst_bridge *bridge;
> + struct msm_dp *dp;
> +
> + if (!drm_bridge) {
> + DRM_ERROR("Invalid params\n");
> + return;
> + }
> +
> + bridge = to_msm_dp_mst_bridge(drm_bridge);
> + if (!bridge->connector) {
> + DRM_ERROR("Invalid connector\n");
> + return;
> + }
> +
> + conn = DP_MST_CONN_ID(bridge);
> +
> + dp = bridge->display;
> +
> + msm_dp_display_atomic_post_disable_helper(dp, bridge->msm_dp_panel);
> +
> + if (!dp->mst_active)
> + msm_dp_display_unprepare(dp);
> +
> + bridge->connector = NULL;
> + bridge->msm_dp_panel = NULL;
> +
> + drm_dbg_dp(dp->drm_dev, "mst bridge:%d conn:%d post disable complete\n",
> + bridge->id, conn);
> +}
> +
> +static void msm_dp_mst_bridge_mode_set(struct drm_bridge *drm_bridge,
> + const struct drm_display_mode *mode,
> + const struct drm_display_mode *adjusted_mode)
> +{
> + struct msm_dp_mst_bridge *bridge;
> + struct msm_dp_mst_bridge_state *dp_bridge_state;
> + struct msm_dp *dp;
> + struct msm_dp_panel *msm_dp_panel;
> +
> + if (!drm_bridge || !mode || !adjusted_mode) {
> + DRM_ERROR("Invalid params\n");
> + return;
> + }
> +
> + bridge = to_msm_dp_mst_bridge(drm_bridge);
> +
> + dp_bridge_state = to_msm_dp_mst_bridge_state(bridge);
> + bridge->connector = dp_bridge_state->connector;
> + bridge->msm_dp_panel = dp_bridge_state->msm_dp_panel;
> +
> + msm_dp_panel = bridge->msm_dp_panel;
> + dp = bridge->display;
> +
> + memset(&bridge->msm_dp_mode, 0x0, sizeof(struct msm_dp_display_mode));
> + memcpy(&bridge->drm_mode, adjusted_mode, sizeof(bridge->drm_mode));
> + msm_dp_display_mode_set_helper(dp, mode, adjusted_mode, bridge->msm_dp_panel);
> + msm_dp_panel->mst_caps.pbn = drm_dp_calc_pbn_mode(msm_dp_panel->msm_dp_mode.drm_mode.clock,
> + (msm_dp_panel->msm_dp_mode.bpp << 4));
> + memcpy(&bridge->msm_dp_mode, &bridge->msm_dp_panel->msm_dp_mode,
> + sizeof(struct msm_dp_display_mode));
No, you can't just memcpy the drm_mode struct.
> + drm_dbg_dp(dp->drm_dev, "mst bridge:%d conn:%d mode set complete %s\n", bridge->id,
> + DP_MST_CONN_ID(bridge), mode->name);
> +}
> +
> +/* DP MST Bridge APIs */
> +static const struct drm_bridge_funcs msm_dp_mst_bridge_ops = {
> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> + .atomic_reset = drm_atomic_helper_bridge_reset,
> + .atomic_pre_enable = msm_dp_mst_bridge_atomic_pre_enable,
> + .atomic_disable = msm_dp_mst_bridge_atomic_disable,
> + .atomic_post_disable = msm_dp_mst_bridge_atomic_post_disable,
> + .mode_set = msm_dp_mst_bridge_mode_set,
> +};
> +
> +int msm_dp_mst_drm_bridge_init(struct msm_dp *dp, struct drm_encoder *encoder)
> +{
> + int rc = 0;
> + struct msm_dp_mst_bridge *bridge = NULL;
> + struct msm_dp_mst_bridge_state *state;
> + struct drm_device *dev;
> + struct msm_dp_mst *mst = dp->msm_dp_mst;
> + int i;
> +
> + for (i = 0; i < mst->max_streams; i++) {
> + if (!mst->mst_bridge[i].in_use) {
> + bridge = &mst->mst_bridge[i];
> + bridge->encoder = encoder;
> + bridge->in_use = true;
> + bridge->id = i;
> + break;
> + }
> + }
> +
> + if (i == mst->max_streams) {
> + DRM_ERROR("mst supports only %d bridges\n", i);
> + rc = -EACCES;
> + goto end;
> + }
> +
> + dev = dp->drm_dev;
> + bridge->display = dp;
> + bridge->base.funcs = &msm_dp_mst_bridge_ops;
> + bridge->base.encoder = encoder;
> + bridge->base.type = dp->connector_type;
> + bridge->base.ops = DRM_BRIDGE_OP_MODES;
> + drm_bridge_add(&bridge->base);
> +
> + rc = drm_bridge_attach(encoder, &bridge->base, NULL, 0);
> + if (rc) {
> + DRM_ERROR("failed to attach bridge, rc=%d\n", rc);
> + goto end;
> + }
> +
> + state = kzalloc(sizeof(*state), GFP_KERNEL);
> + if (!state) {
> + rc = -ENOMEM;
> + goto end;
> + }
> +
> + drm_atomic_private_obj_init(dev, &bridge->obj,
> + &state->base,
> + &msm_dp_mst_bridge_state_funcs);
> +
> + drm_dbg_dp(dp->drm_dev, "mst drm bridge init. bridge id:%d\n", i);
> +
> + return 0;
> +
> +end:
> + return rc;
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_mst_drm.h b/drivers/gpu/drm/msm/dp/dp_mst_drm.h
> new file mode 100644
> index 0000000000000000000000000000000000000000..c2a82cd3c6d6e1951a8e5905d3aa39dfc691023b
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_mst_drm.h
> @@ -0,0 +1,102 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + *
> + * Permission to use, copy, modify, distribute, and sell this software and its
> + * documentation for any purpose is hereby granted without fee, provided that
> + * the above copyright notice appear in all copies and that both that copyright
> + * notice and this permission notice appear in supporting documentation, and
> + * that the name of the copyright holders not be used in advertising or
> + * publicity pertaining to distribution of the software without specific,
> + * written prior permission. The copyright holders make no representations
> + * about the suitability of this software for any purpose. It is provided "as
> + * is" without express or implied warranty.
> + *
> + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
> + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
> + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
> + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
> + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
> + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
> + * OF THIS SOFTWARE.
> + */
> +
> +#ifndef _DP_MST_DRM_H_
> +#define _DP_MST_DRM_H_
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/errno.h>
> +#include <linux/version.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_fixed.h>
> +#include <drm/drm_connector.h>
> +#include <drm/display/drm_dp_helper.h>
> +#include <drm/display/drm_dp_mst_helper.h>
> +
> +#include "dp_panel.h"
> +#include "dp_display.h"
> +
> +#define DP_MST_CONN_ID(bridge) ((bridge)->connector ? \
> + (bridge)->connector->base.id : 0)
locking? Also connectors can easily be freed, so you can't just read
into it.
> +
> +struct msm_dp_mst_bridge {
> + struct drm_bridge base;
> + struct drm_private_obj obj;
> + u32 id;
> +
> + bool in_use;
> +
> + struct msm_dp *display;
> + struct drm_encoder *encoder;
> +
> + struct drm_display_mode drm_mode;
Why? Where is this being set? Why can't you use the state objects instead?
> + struct msm_dp_display_mode msm_dp_mode;
I don't see this being used. Please drop.
> + struct drm_connector *connector;
So, you have connector here and a connector in the state. Please drop
one (I'd guess this one).
> + struct msm_dp_panel *msm_dp_panel;
> +
> + int vcpi;
> + int pbn;
> + int num_slots;
> + int start_slot;
Which of the fields (including in_use) are long-lived and which are a
part of the current state? Can we move all state ones to bridge's state?
> +};
> +
> +struct msm_dp_mst_bridge_state {
> + struct drm_private_state base;
> + struct drm_connector *connector;
> + struct msm_dp_panel *msm_dp_panel;
> + int num_slots;
> +};
> +
> +struct msm_dp_mst {
> + bool mst_initialized;
> + struct drm_dp_mst_topology_mgr mst_mgr;
> + struct msm_dp_mst_bridge *mst_bridge;
> + struct msm_dp *msm_dp;
> + bool mst_session_hpd_state;
> + u32 max_streams;
> +};
> +
> +struct msm_dp_mst_connector {
> + struct drm_connector connector;
> + struct drm_dp_mst_port *mst_port;
> + struct msm_dp *msm_dp;
> + struct msm_dp_panel *dp_panel;
> +};
> +
> +#define to_msm_dp_mst_bridge(x) container_of((x), struct msm_dp_mst_bridge, base)
> +#define to_msm_dp_mst_bridge_priv(x) \
> + container_of((x), struct msm_dp_mst_bridge, obj)
> +#define to_msm_dp_mst_bridge_priv_state(x) \
> + container_of((x), struct msm_dp_mst_bridge_state, base)
> +#define to_msm_dp_mst_bridge_state(x) \
> + to_msm_dp_mst_bridge_priv_state((x)->obj.state)
> +#define to_msm_dp_mst_connector(x) \
> + container_of((x), struct msm_dp_mst_connector, connector)
> +int msm_dp_mst_drm_bridge_init(struct msm_dp *dp, struct drm_encoder *encoder);
> +
> +#endif /* _DP_MST_DRM_H_ */
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
More information about the Freedreno
mailing list