[PATCH] drm/msm/dpu: Filter modes based on adjusted mode clock

[Dmitry Baryshkov]

On Thu, Dec 12, 2024 at 11:11:54AM -0800, Jessica Zhang wrote:
> Filter out modes that have a clock rate greater than the max core clock
> rate when adjusted for the perf clock factor
> 
> This is especially important for chipsets such as QCS615 that have lower
> limits for the MDP max core clock.
> 
> Since the core CRTC clock is at least the mode clock (adjusted for the
> perf clock factor) [1], the modes supported by the driver should be less
> than the max core clock rate.
> 
> [1] https://elixir.bootlin.com/linux/v6.12.4/source/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c#L83
> 
> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 29 +++++++++++++++++++--------
>  drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h |  3 +++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c      | 12 +++++++++++
>  3 files changed, 36 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> index 6f0a37f954fe8797a4e3a34e7876a93d5e477642..0afd7c81981c722a1a9176062250c418255fe6d0 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> @@ -31,6 +31,26 @@ enum dpu_perf_mode {
>  	DPU_PERF_MODE_MAX
>  };
>  
> +/**
> + * dpu_core_perf_adjusted_crtc_clk - Adjust given crtc clock rate according to

Nit: CRTC (here and further)

> + *   the perf clock factor.
> + * @crtc_clk_rate - Unadjusted crtc clock rate
> + * @perf_cfg: performance configuration
> + */
> +u64 dpu_core_perf_adjusted_crtc_clk(u64 crtc_clk_rate,
> +				    const struct dpu_perf_cfg *perf_cfg)

It's not just the CRTC clocks

> +{
> +	u32 clk_factor;
> +
> +	clk_factor = perf_cfg->clk_inefficiency_factor;
> +	if (clk_factor) {
> +		crtc_clk_rate *= clk_factor;
> +		do_div(crtc_clk_rate, 100);
> +	}
> +
> +	return crtc_clk_rate;
> +}
> +
>  /**
>   * _dpu_core_perf_calc_bw() - to calculate BW per crtc
>   * @perf_cfg: performance configuration
> @@ -76,7 +96,6 @@ static u64 _dpu_core_perf_calc_clk(const struct dpu_perf_cfg *perf_cfg,
>  	struct dpu_plane_state *pstate;
>  	struct drm_display_mode *mode;
>  	u64 crtc_clk;

While you are at it, could you please also add a patch, replacing height
* vidth * vrefresh with mode->clock * 1000? The former one has limited
precision.

> -	u32 clk_factor;
>  
>  	mode = &state->adjusted_mode;
>  
> @@ -90,13 +109,7 @@ static u64 _dpu_core_perf_calc_clk(const struct dpu_perf_cfg *perf_cfg,
>  		crtc_clk = max(pstate->plane_clk, crtc_clk);
>  	}

This function calculates crtc_clk as max(plane_clk, crtc_clk). Shouldn't
we also reject the atomic_state if for any of the planes the corrected
clock is lower than max_core_clk_rate

>  
> -	clk_factor = perf_cfg->clk_inefficiency_factor;
> -	if (clk_factor) {
> -		crtc_clk *= clk_factor;
> -		do_div(crtc_clk, 100);
> -	}
> -
> -	return crtc_clk;
> +	return dpu_core_perf_adjusted_crtc_clk(crtc_clk, perf_cfg);
>  }
>  
>  static struct dpu_kms *_dpu_crtc_get_kms(struct drm_crtc *crtc)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> index 451bf8021114d9d4a2dfdbb81ed4150fc559c681..c3bcd567cdfb66647c83682d1feedd69e33f0680 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> @@ -54,6 +54,9 @@ struct dpu_core_perf {
>  	u64 fix_core_ab_vote;
>  };
>  
> +u64 dpu_core_perf_adjusted_crtc_clk(u64 clk_rate,
> +				    const struct dpu_perf_cfg *perf_cfg);
> +
>  int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
>  		struct drm_crtc_state *state);
>  
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index ad3462476a143ec01a3b8817a2c85b0f50435a9e..cd7b84ab57a7526948c2beb7c5cefdddcbe4f6d9 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -1257,6 +1257,7 @@ static enum drm_mode_status dpu_crtc_mode_valid(struct drm_crtc *crtc,
>  						const struct drm_display_mode *mode)
>  {
>  	struct dpu_kms *dpu_kms = _dpu_crtc_get_kms(crtc);
> +	u64 adjusted_mode_clk;
>  
>  	/* if there is no 3d_mux block we cannot merge LMs so we cannot
>  	 * split the large layer into 2 LMs, filter out such modes
> @@ -1264,6 +1265,17 @@ static enum drm_mode_status dpu_crtc_mode_valid(struct drm_crtc *crtc,
>  	if (!dpu_kms->catalog->caps->has_3d_merge &&
>  	    mode->hdisplay > dpu_kms->catalog->caps->max_mixer_width)
>  		return MODE_BAD_HVALUE;
> +
> +	adjusted_mode_clk = dpu_core_perf_adjusted_crtc_clk(mode->clock,
> +							    dpu_kms->perf.perf_cfg);
> +
> +	/*
> +	 * The given mode, adjusted for the perf clock factor, should not exceed
> +	 * the max core clock rate
> +	 */
> +	if (adjusted_mode_clk > dpu_kms->perf.max_core_clk_rate / 1000)
> +		return MODE_CLOCK_HIGH;
> +
>  	/*
>  	 * max crtc width is equal to the max mixer width * 2 and max height is 4K
>  	 */
> 
> ---
> base-commit: 423c1c96d6b2d3bb35072e33a5fdd8db6d2c0a74
> change-id: 20241212-filter-mode-clock-8cb2e769f05b
> 
> Best regards,
> -- 
> Jessica Zhang <quic_jesszhan at quicinc.com>
> 

-- 
With best wishes
Dmitry