[PATCH 05/35] drm/msm/dpu: inline _setup_ctl_ops()

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Fri Dec 13 22:14:21 UTC 2024


Inline the _setup_ctl_ops() function, it makes it easier to handle
different conditions involving CTL configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 96 ++++++++++++++----------------
 1 file changed, 46 insertions(+), 50 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 4893f10d6a5832521808c0f4d8b231c356dbdc41..9a958a0c19f54c2ed2c204e314dfa8cd9e735111 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -687,55 +687,6 @@ static void dpu_hw_ctl_set_fetch_pipe_active(struct dpu_hw_ctl *ctx,
 	DPU_REG_WRITE(&ctx->hw, CTL_FETCH_PIPE_ACTIVE, val);
 }
 
-static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops,
-		unsigned long cap)
-{
-	if (cap & BIT(DPU_CTL_ACTIVE_CFG)) {
-		ops->trigger_flush = dpu_hw_ctl_trigger_flush_v1;
-		ops->setup_intf_cfg = dpu_hw_ctl_intf_cfg_v1;
-		ops->reset_intf_cfg = dpu_hw_ctl_reset_intf_cfg_v1;
-		ops->update_pending_flush_intf =
-			dpu_hw_ctl_update_pending_flush_intf_v1;
-
-		ops->update_pending_flush_periph =
-			dpu_hw_ctl_update_pending_flush_periph_v1;
-
-		ops->update_pending_flush_merge_3d =
-			dpu_hw_ctl_update_pending_flush_merge_3d_v1;
-		ops->update_pending_flush_wb = dpu_hw_ctl_update_pending_flush_wb_v1;
-		ops->update_pending_flush_dsc =
-			dpu_hw_ctl_update_pending_flush_dsc_v1;
-		ops->update_pending_flush_cdm = dpu_hw_ctl_update_pending_flush_cdm_v1;
-	} else {
-		ops->trigger_flush = dpu_hw_ctl_trigger_flush;
-		ops->setup_intf_cfg = dpu_hw_ctl_intf_cfg;
-		ops->update_pending_flush_intf =
-			dpu_hw_ctl_update_pending_flush_intf;
-		ops->update_pending_flush_wb = dpu_hw_ctl_update_pending_flush_wb;
-		ops->update_pending_flush_cdm = dpu_hw_ctl_update_pending_flush_cdm;
-	}
-	ops->clear_pending_flush = dpu_hw_ctl_clear_pending_flush;
-	ops->update_pending_flush = dpu_hw_ctl_update_pending_flush;
-	ops->get_pending_flush = dpu_hw_ctl_get_pending_flush;
-	ops->get_flush_register = dpu_hw_ctl_get_flush_register;
-	ops->trigger_start = dpu_hw_ctl_trigger_start;
-	ops->is_started = dpu_hw_ctl_is_started;
-	ops->trigger_pending = dpu_hw_ctl_trigger_pending;
-	ops->reset = dpu_hw_ctl_reset_control;
-	ops->wait_reset_status = dpu_hw_ctl_wait_reset_status;
-	ops->clear_all_blendstages = dpu_hw_ctl_clear_all_blendstages;
-	ops->setup_blendstage = dpu_hw_ctl_setup_blendstage;
-	ops->update_pending_flush_sspp = dpu_hw_ctl_update_pending_flush_sspp;
-	ops->update_pending_flush_mixer = dpu_hw_ctl_update_pending_flush_mixer;
-	if (cap & BIT(DPU_CTL_DSPP_SUB_BLOCK_FLUSH))
-		ops->update_pending_flush_dspp = dpu_hw_ctl_update_pending_flush_dspp_sub_blocks;
-	else
-		ops->update_pending_flush_dspp = dpu_hw_ctl_update_pending_flush_dspp;
-
-	if (cap & BIT(DPU_CTL_FETCH_ACTIVE))
-		ops->set_active_pipes = dpu_hw_ctl_set_fetch_pipe_active;
-};
-
 /**
  * dpu_hw_ctl_init() - Initializes the ctl_path hw driver object.
  * Should be called before accessing any ctl_path register.
@@ -761,7 +712,52 @@ struct dpu_hw_ctl *dpu_hw_ctl_init(struct drm_device *dev,
 	c->hw.log_mask = DPU_DBG_MASK_CTL;
 
 	c->caps = cfg;
-	_setup_ctl_ops(&c->ops, c->caps->features);
+
+	if (c->caps->features & BIT(DPU_CTL_ACTIVE_CFG)) {
+		c->ops.trigger_flush = dpu_hw_ctl_trigger_flush_v1;
+		c->ops.setup_intf_cfg = dpu_hw_ctl_intf_cfg_v1;
+		c->ops.reset_intf_cfg = dpu_hw_ctl_reset_intf_cfg_v1;
+		c->ops.update_pending_flush_intf =
+			dpu_hw_ctl_update_pending_flush_intf_v1;
+
+		c->ops.update_pending_flush_periph =
+			dpu_hw_ctl_update_pending_flush_periph_v1;
+
+		c->ops.update_pending_flush_merge_3d =
+			dpu_hw_ctl_update_pending_flush_merge_3d_v1;
+		c->ops.update_pending_flush_wb = dpu_hw_ctl_update_pending_flush_wb_v1;
+		c->ops.update_pending_flush_dsc =
+			dpu_hw_ctl_update_pending_flush_dsc_v1;
+		c->ops.update_pending_flush_cdm = dpu_hw_ctl_update_pending_flush_cdm_v1;
+	} else {
+		c->ops.trigger_flush = dpu_hw_ctl_trigger_flush;
+		c->ops.setup_intf_cfg = dpu_hw_ctl_intf_cfg;
+		c->ops.update_pending_flush_intf =
+			dpu_hw_ctl_update_pending_flush_intf;
+		c->ops.update_pending_flush_wb = dpu_hw_ctl_update_pending_flush_wb;
+		c->ops.update_pending_flush_cdm = dpu_hw_ctl_update_pending_flush_cdm;
+	}
+	c->ops.clear_pending_flush = dpu_hw_ctl_clear_pending_flush;
+	c->ops.update_pending_flush = dpu_hw_ctl_update_pending_flush;
+	c->ops.get_pending_flush = dpu_hw_ctl_get_pending_flush;
+	c->ops.get_flush_register = dpu_hw_ctl_get_flush_register;
+	c->ops.trigger_start = dpu_hw_ctl_trigger_start;
+	c->ops.is_started = dpu_hw_ctl_is_started;
+	c->ops.trigger_pending = dpu_hw_ctl_trigger_pending;
+	c->ops.reset = dpu_hw_ctl_reset_control;
+	c->ops.wait_reset_status = dpu_hw_ctl_wait_reset_status;
+	c->ops.clear_all_blendstages = dpu_hw_ctl_clear_all_blendstages;
+	c->ops.setup_blendstage = dpu_hw_ctl_setup_blendstage;
+	c->ops.update_pending_flush_sspp = dpu_hw_ctl_update_pending_flush_sspp;
+	c->ops.update_pending_flush_mixer = dpu_hw_ctl_update_pending_flush_mixer;
+	if (c->caps->features & BIT(DPU_CTL_DSPP_SUB_BLOCK_FLUSH))
+		c->ops.update_pending_flush_dspp = dpu_hw_ctl_update_pending_flush_dspp_sub_blocks;
+	else
+		c->ops.update_pending_flush_dspp = dpu_hw_ctl_update_pending_flush_dspp;
+
+	if (c->caps->features & BIT(DPU_CTL_FETCH_ACTIVE))
+		c->ops.set_active_pipes = dpu_hw_ctl_set_fetch_pipe_active;
+
 	c->idx = cfg->id;
 	c->mixer_count = mixer_count;
 	c->mixer_hw_caps = mixer;

-- 
2.39.5



More information about the Freedreno mailing list