[PATCH 1/8] drm/msm/dpu: link DSPP_2/_3 blocks on SM8150

[Abhinav Kumar]

On 12/16/2024 12:27 AM, Dmitry Baryshkov wrote:
> Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks.
> 
> Fixes: 05ae91d960fd ("drm/msm/dpu: enable DSPP support on SM8[12]50")
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h | 2 ++
>   1 file changed, 2 insertions(+)
> 

Change looks fine

Reviewed-by: Abhinav Kumar <quic_abhinavk at quicinc.com>

One question below (not tied to the change but arose due to it):

> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h
> index 6ccfde82fecdb4e3612df161814b16f7af40ca5f..421afacb7248039abd9fb66bcb73b756ae0d640a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h
> @@ -164,6 +164,7 @@ static const struct dpu_lm_cfg sm8150_lm[] = {
>   		.sblk = &sdm845_lm_sblk,
>   		.lm_pair = LM_3,
>   		.pingpong = PINGPONG_2,
> +		.dspp = DSPP_2,
>   	}, {
>   		.name = "lm_3", .id = LM_3,
>   		.base = 0x47000, .len = 0x320,
> @@ -171,6 +172,7 @@ static const struct dpu_lm_cfg sm8150_lm[] = {
>   		.sblk = &sdm845_lm_sblk,
>   		.lm_pair = LM_2,
>   		.pingpong = PINGPONG_3,
> +		.dspp = DSPP_3,
>   	}, {
>   		.name = "lm_4", .id = LM_4,
>   		.base = 0x48000, .len = 0x320,
> 

the consumer of .dspp seems to be in the RM code which is used to map 
the DSPP to encoder_id but is there really any case where lm_id != 
dspp_id ... I guess I am missing the context of why DSPP id needs to be 
tracked as LMs and DSPPs go together. Let me also check this part 
internally.