[PATCH v4 5/9] drm/msm/dpu: Add SM6150 support

[fange zhang]

On 2024/12/17 18:54, Dmitry Baryshkov wrote:
> On Tue, Dec 10, 2024 at 02:53:56PM +0800, Fange Zhang wrote:
>> From: Li Liu <quic_lliu6 at quicinc.com>
>>
>> Add definitions for the display hardware used on the Qualcomm SM6150
>> platform.
>>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>> Signed-off-by: Li Liu <quic_lliu6 at quicinc.com>
>> Signed-off-by: Fange Zhang <quic_fangez at quicinc.com>
>> ---
>>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_5_3_sm6150.h | 254 +++++++++++++++++++++
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   1 +
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
>>   4 files changed, 257 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_3_sm6150.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_3_sm6150.h
>> new file mode 100644
>> index 0000000000000000000000000000000000000000..621a2140f675fa28b3a7fcd8573e59b306cd6832
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_3_sm6150.h
> 
> [...]
> 
>> +
>> +const struct dpu_mdss_cfg dpu_sm6150_cfg = {
>> +	.mdss_ver = &sm6150_mdss_ver,
>> +	.caps = &sm6150_dpu_caps,
>> +	.mdp = &sm6150_mdp,
>> +	.ctl_count = ARRAY_SIZE(sm6150_ctl),
>> +	.ctl = sm6150_ctl,
>> +	.sspp_count = ARRAY_SIZE(sm6150_sspp),
>> +	.sspp = sm6150_sspp,
>> +	.mixer_count = ARRAY_SIZE(sm6150_lm),
>> +	.mixer = sm6150_lm,
>> +	.dspp_count = ARRAY_SIZE(sm6150_dspp),
>> +	.dspp = sm6150_dspp,
>> +	.pingpong_count = ARRAY_SIZE(sm6150_pp),
>> +	.pingpong = sm6150_pp,
>> +	.intf_count = ARRAY_SIZE(sm6150_intf),
>> +	.intf = sm6150_intf,
>> +	.vbif_count = ARRAY_SIZE(sdm845_vbif),
>> +	.vbif = sdm845_vbif,
>> +	.perf = &sm6150_perf_data,
> 
> I noticed that the catalog entry doesn't provide writeback configuration
> although the vendor DTSi specified that there is WB_2 on this platform.
> Please send a followup patch enabling writeback on this platform.
ok, will update it in next update
> 
>> +};
>> +
>> +#endif
>