[PATCH v6 6/7] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
Neil Armstrong
neil.armstrong at linaro.org
Tue Dec 17 14:51:19 UTC 2024
Each GPU OPP requires a specific peak DDR bandwidth, let's add
those to each OPP and also the related interconnect path.
Reviewed-by: Akhil P Oommen <quic_akhilpo at quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index e7774d32fb6d2288748ecec00bf525b2b3c40fbb..dedd4a2a58f2c89b6e1b12d955da9ef8734604c2 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -2114,6 +2115,10 @@ gpu: gpu at 3d00000 {
qcom,gmu = <&gmu>;
#cooling-cells = <2>;
+ interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "gfx-mem";
+
status = "disabled";
zap-shader {
@@ -2127,41 +2132,49 @@ gpu_opp_table: opp-table {
opp-680000000 {
opp-hz = /bits/ 64 <680000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-peak-kBps = <16500000>;
};
opp-615000000 {
opp-hz = /bits/ 64 <615000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ opp-peak-kBps = <12449218>;
};
opp-550000000 {
opp-hz = /bits/ 64 <550000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ opp-peak-kBps = <10687500>;
};
opp-475000000 {
opp-hz = /bits/ 64 <475000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ opp-peak-kBps = <6074218>;
};
opp-401000000 {
opp-hz = /bits/ 64 <401000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ opp-peak-kBps = <6074218>;
};
opp-348000000 {
opp-hz = /bits/ 64 <348000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+ opp-peak-kBps = <6074218>;
};
opp-295000000 {
opp-hz = /bits/ 64 <295000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ opp-peak-kBps = <6074218>;
};
opp-220000000 {
opp-hz = /bits/ 64 <220000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+ opp-peak-kBps = <2136718>;
};
};
};
--
2.34.1
More information about the Freedreno
mailing list