March 2025 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Mar 1 07:46:25 UTC 2025
Ending: Wed Mar 12 21:16:48 UTC 2025
Messages: 338

• [PATCH v3 0/8] Initial support of MSM8937 and Xiaomi Redmi 3S   Will Deacon
• [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models   Dmitry Baryshkov
  • [PATCH v2 1/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937   Dmitry Baryshkov
  • [PATCH v2 2/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917   Dmitry Baryshkov
  • [PATCH v2 3/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953   Dmitry Baryshkov
  • [PATCH v2 4/5] drm/msm/dpu: drop TE2 definitions   Dmitry Baryshkov
  • [PATCH v2 5/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630   Dmitry Baryshkov
• [PATCH v4 0/2] drm/bridge: reuse DRM HDMI Audio helpers for DisplayPort bridges   Dmitry Baryshkov
  • [PATCH v4 1/2] drm/bridge: split HDMI Audio from DRM_BRIDGE_OP_HDMI   Dmitry Baryshkov
  • [PATCH v4 2/2] drm/msm/dp: reuse generic HDMI codec implementation   Dmitry Baryshkov
• [PATCH RFC v2 0/7] drm/display: dp: add new DPCD access functions   Dmitry Baryshkov
  • [PATCH RFC v2 3/7] drm/display: dp: use new DCPD access helpers   Dmitry Baryshkov
  • [PATCH RFC v2 4/7] drm/display: dp-aux-dev: use new DCPD access helpers   Dmitry Baryshkov
  • [PATCH RFC v2 5/7] drm/display: dp-cec: use new DCPD access helpers   Dmitry Baryshkov
  • [PATCH RFC v2 6/7] drm/display: dp-mst-topology: use new DCPD access helpers   Dmitry Baryshkov
  • [PATCH RFC v2 7/7] drm/display: dp-tunnel: use new DCPD access helpers   Dmitry Baryshkov
  • [PATCH RFC v2 0/7] drm/display: dp: add new DPCD access functions   Jani Nikula
    • [PATCH RFC v2 0/7] drm/display: dp: add new DPCD access functions   Jani Nikula
      • [PATCH RFC v2 0/7] drm/display: dp: add new DPCD access functions   Dmitry Baryshkov
• [PATCH RFC v2 1/7] drm/display: dp: implement new access helpers   Dmitry Baryshkov
• [PATCH RFC v2 2/7] drm/display: dp: change drm_dp_dpcd_read_link_status() return value   Dmitry Baryshkov
• [PATCH RESEND] drm/msm/dpu: Delete a variable initialisation before a null pointer check in two functions   Dmitry Baryshkov
  • [PATCH RESEND] drm/msm/dpu: Delete a variable initialisation before a null pointer check in two functions   Dan Carpenter
    • [RESEND] drm/msm/dpu: Delete a variable initialisation before a null pointer check in two functions   Dan Carpenter
    • [RFC] Clarification for “undefined behaviour”?   Dan Carpenter
      • [RFC] Clarification for “undefined behaviour”?   David Laight
      • [RFC] Clarification for “undefined behaviour”?   Dan Carpenter
      • [RFC] Clarification for “undefined behaviour”?   David Laight
• [PATCH v8 00/15] drm/msm/dpu: Support quad pipe with dual-DSI   Jun Nie
  • [PATCH v8 01/15] drm/msm/dpu: check every pipe per capability   Jun Nie
  • [PATCH v8 02/15] drm/msm/dpu: Do not fix number of DSC   Jun Nie
  • [PATCH v8 03/15] drm/msm/dpu: configure DSC per number in use   Jun Nie
  • [PATCH v8 04/15] drm/msm/dpu: polish log for resource allocation   Jun Nie
  • [PATCH v8 05/15] drm/msm/dpu: decide right side per last bit   Jun Nie
  • [PATCH v8 06/15] drm/msm/dpu: fix mixer number counter on allocation   Jun Nie
  • [PATCH v8 07/15] drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocation   Jun Nie
  • [PATCH v8 08/15] drm/msm/dpu: bind correct pingpong for quad pipe   Jun Nie
  • [PATCH v8 09/15] drm/msm/dpu: Add pipe as trace argument   Jun Nie
  • [PATCH v8 10/15] drm/msm/dpu: handle pipes as array   Jun Nie
  • [PATCH v8 11/15] drm/msm/dpu: split PIPES_PER_STAGE definition per plane and mixer   Jun Nie
    • [PATCH v8 11/15] drm/msm/dpu: split PIPES_PER_STAGE definition per plane and mixer   Jessica Zhang
  • [PATCH v8 12/15] drm/msm/dpu: blend pipes per mixer pairs config   Jun Nie
    • [PATCH v8 12/15] drm/msm/dpu: blend pipes per mixer pairs config   Jessica Zhang
  • [PATCH v8 13/15] drm/msm/dpu: support SSPP assignment for quad-pipe case   Jun Nie
  • [PATCH v8 14/15] drm/msm/dpu: support plane splitting in quad-pipe case   Jun Nie
  • [PATCH v8 15/15] drm/msm/dpu: Enable quad-pipe for DSC and dual-DSI case   Jun Nie
• [PATCH RFC] drm/msm/dpu: Force modeset if new CTLs have been reserved   Jessica Zhang
  • [PATCH RFC] drm/msm/dpu: Force modeset if new CTLs have been reserved   Dmitry Baryshkov
    • [PATCH RFC] drm/msm/dpu: Force modeset if new CTLs have been reserved   Jessica Zhang
      • [PATCH RFC] drm/msm/dpu: Force modeset if new CTLs have been reserved   Dmitry Baryshkov
      • [PATCH RFC] drm/msm/dpu: Force modeset if new CTLs have been reserved   Abhinav Kumar
      • [PATCH RFC] drm/msm/dpu: Force modeset if new CTLs have been reserved   Dmitry Baryshkov
      • [PATCH RFC] drm/msm/dpu: Force modeset if new CTLs have been reserved   Abhinav Kumar
      • [PATCH RFC] drm/msm/dpu: Force modeset if new CTLs have been reserved   Dmitry Baryshkov
      • [PATCH RFC] drm/msm/dpu: Force modeset if new CTLs have been reserved   Abhinav Kumar
• [PATCH v6 03/14] drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocation   Jessica Zhang
  • [PATCH v6 03/14] drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocation   Dmitry Baryshkov
    • [PATCH v6 03/14] drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocation   Dmitry Baryshkov
• [PATCH v2 05/16] dt-bindings: display/msm: dp-controller: Add SM8750   Abhinav Kumar
  • [PATCH v2 05/16] dt-bindings: display/msm: dp-controller: Add SM8750   Dmitry Baryshkov
• [PATCH 05/11] drm/msm/dsi: add DSI support for SA8775P   Ayushi Makhija
• [PATCH 08/11] arm64: dts: qcom: sa8775p-ride: enable Display serial interface   Ayushi Makhija
  • [PATCH 08/11] arm64: dts: qcom: sa8775p-ride: enable Display serial interface   Dmitry Baryshkov
    • [PATCH 08/11] arm64: dts: qcom: sa8775p-ride: enable Display serial interface   Ayushi Makhija
• [PATCH 07/11] arm64: dts: qcom: sa8775p-ride: add anx7625 DSI to DP bridge nodes   Ayushi Makhija
• [PATCH v4 0/5] iommu/arm-smmu, drm/msm: Fixes for stall-on-fault   Connor Abbott
  • [PATCH v4 1/5] iommu/arm-smmu: Save additional information on context fault   Connor Abbott
    • [PATCH v4 1/5] iommu/arm-smmu: Save additional information on context fault   Rob Clark
    • [PATCH v4 1/5] iommu/arm-smmu: Save additional information on context fault   Will Deacon
      • [PATCH v4 1/5] iommu/arm-smmu: Save additional information on context fault   Connor Abbott
      • [PATCH v4 1/5] iommu/arm-smmu: Save additional information on context fault   Will Deacon
      • [PATCH v4 1/5] iommu/arm-smmu: Save additional information on context fault   Rob Clark
      • [PATCH v4 1/5] iommu/arm-smmu: Save additional information on context fault   Will Deacon
      • [PATCH v4 1/5] iommu/arm-smmu: Save additional information on context fault   Rob Clark
      • [PATCH v4 1/5] iommu/arm-smmu: Save additional information on context fault   Robin Murphy
      • [PATCH v4 1/5] iommu/arm-smmu: Save additional information on context fault   Rob Clark
  • [PATCH v4 2/5] iommu/arm-smmu-qcom: Don't read fault registers directly   Connor Abbott
    • [PATCH v4 2/5] iommu/arm-smmu-qcom: Don't read fault registers directly   Rob Clark
    • [PATCH v4 2/5] iommu/arm-smmu-qcom: Don't read fault registers directly   Will Deacon
      • [PATCH v4 2/5] iommu/arm-smmu-qcom: Don't read fault registers directly   Connor Abbott
      • [PATCH v4 2/5] iommu/arm-smmu-qcom: Don't read fault registers directly   Rob Clark
      • [PATCH v4 2/5] iommu/arm-smmu-qcom: Don't read fault registers directly   Robin Murphy
      • [PATCH v4 2/5] iommu/arm-smmu-qcom: Don't read fault registers directly   Will Deacon
  • [PATCH v4 3/5] iommu/arm-smmu: Fix spurious interrupts with stall-on-fault   Connor Abbott
    • [PATCH v4 3/5] iommu/arm-smmu: Fix spurious interrupts with stall-on-fault   Rob Clark
  • [PATCH v4 4/5] iommu/arm-smmu-qcom: Make set_stall work when the device is on   Connor Abbott
    • [PATCH v4 4/5] iommu/arm-smmu-qcom: Make set_stall work when the device is on   Rob Clark
    • [PATCH v4 4/5] iommu/arm-smmu-qcom: Make set_stall work when the device is on   Will Deacon
      • [PATCH v4 4/5] iommu/arm-smmu-qcom: Make set_stall work when the device is on   Connor Abbott
      • [PATCH v4 4/5] iommu/arm-smmu-qcom: Make set_stall work when the device is on   Will Deacon
      • [PATCH v4 4/5] iommu/arm-smmu-qcom: Make set_stall work when the device is on   Connor Abbott
  • [PATCH v4 5/5] drm/msm: Temporarily disable stall-on-fault after a page fault   Connor Abbott
    • [PATCH v4 5/5] drm/msm: Temporarily disable stall-on-fault after a page fault   Rob Clark
      • [PATCH v4 5/5] drm/msm: Temporarily disable stall-on-fault after a page fault   Connor Abbott
      • [PATCH v4 5/5] drm/msm: Temporarily disable stall-on-fault after a page fault   Rob Clark
• [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration   Xiangxu Yin
  • [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration   Dmitry Baryshkov
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Xiangxu Yin
  • [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615   Dmitry Baryshkov
• [PATCH 0/2] MAINTAINERS: update my email address   Dmitry Baryshkov
  • [PATCH 1/2] MAINTAINERS: use kernel.org alias   Dmitry Baryshkov
    • [PATCH 1/2] MAINTAINERS: use kernel.org alias   Abhinav Kumar
    • [PATCH 1/2] MAINTAINERS: use kernel.org alias   neil.armstrong at linaro.org
  • [PATCH 2/2] mailmap: remap all addresses to kernel.org alias   Dmitry Baryshkov
    • [PATCH 2/2] mailmap: remap all addresses to kernel.org alias   Abhinav Kumar
    • [PATCH 2/2] mailmap: remap all addresses to kernel.org alias   neil.armstrong at linaro.org
• [PATCH] drm/msm/dpu: Support YUV formats on writeback for DPU 5.x+   Jessica Zhang
  • [PATCH] drm/msm/dpu: Support YUV formats on writeback for DPU 5.x+   Abhinav Kumar
    • [PATCH] drm/msm/dpu: Support YUV formats on writeback for DPU 5.x+   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: Adjust CDM_MUX to support CWB PINGPONG   Jessica Zhang
  • [PATCH] drm/msm/dpu: Adjust CDM_MUX to support CWB PINGPONG   Abhinav Kumar
    • [PATCH] drm/msm/dpu: Adjust CDM_MUX to support CWB PINGPONG   Dmitry Baryshkov
  • [PATCH] drm/msm/dpu: Adjust CDM_MUX to support CWB PINGPONG   Dmitry Baryshkov
    • [PATCH] drm/msm/dpu: Adjust CDM_MUX to support CWB PINGPONG   Abhinav Kumar
      • [PATCH] drm/msm/dpu: Adjust CDM_MUX to support CWB PINGPONG   Dmitry Baryshkov
  • [PATCH] drm/msm/dpu: Adjust CDM_MUX to support CWB PINGPONG   Dmitry Baryshkov
• [PATCH] drm/msm/dpu: Clear perf params before calculating bw   Jessica Zhang
  • [PATCH] drm/msm/dpu: Clear perf params before calculating bw   Abhinav Kumar
  • [PATCH] drm/msm/dpu: Clear perf params before calculating bw   Dmitry Baryshkov
• [PATCH 0/2] drm/msm/dpu: two fixes for kerneldocs   Dmitry Baryshkov
  • [PATCH 1/2] drm/msm/dpu: correct dpu_crtc_check_mode_changed docs   Dmitry Baryshkov
    • [PATCH 1/2] drm/msm/dpu: correct dpu_crtc_check_mode_changed docs   Rob Clark
  • [PATCH 2/2] drm/msm/dpu: correct struct dpu_encoder_virt docs   Dmitry Baryshkov
    • [PATCH 2/2] drm/msm/dpu: correct struct dpu_encoder_virt docs   Rob Clark
  • [PATCH 0/2] drm/msm/dpu: two fixes for kerneldocs   Dmitry Baryshkov
• [PATCH 00/11] Various dt-bindings fixes   Konrad Dybcio
  • [PATCH 01/11] dt-bindings: iommu: qcom,iommu: Add optional TBU clock   Konrad Dybcio
    • [PATCH 01/11] dt-bindings: iommu: qcom,iommu: Add optional TBU clock   Rob Herring (Arm)
  • [PATCH 02/11] dt-bindings: display: msm: sm8350-mdss: Describe the CPU-CFG icc path   Konrad Dybcio
  • [PATCH 03/11] dt-bindings: power: qcom,kpss-acc-v2: Add MSM8916 compatible   Konrad Dybcio
    • [PATCH 03/11] dt-bindings: power: qcom,kpss-acc-v2: Add MSM8916 compatible   Dmitry Baryshkov
    • [PATCH 03/11] dt-bindings: power: qcom,kpss-acc-v2: Add MSM8916 compatible   Stephan Gerhold
      • [PATCH 03/11] dt-bindings: power: qcom,kpss-acc-v2: Add MSM8916 compatible   Konrad Dybcio
    • [PATCH 03/11] dt-bindings: power: qcom,kpss-acc-v2: Add MSM8916 compatible   Krzysztof Kozlowski
  • [PATCH 04/11] arm64: dts: qcom: msm8916: Fix KPSS ACC compatible   Konrad Dybcio
    • [PATCH 04/11] arm64: dts: qcom: msm8916: Fix KPSS ACC compatible   Dmitry Baryshkov
  • [PATCH 05/11] arm64: dts: qcom: sdx75: Fix up the USB interrupt description   Konrad Dybcio
  • [PATCH 06/11] arm64: dts: qcom: sdx75: Rename AOSS_QMP to power-management   Konrad Dybcio
    • [PATCH 06/11] arm64: dts: qcom: sdx75: Rename AOSS_QMP to power-management   Dmitry Baryshkov
  • [PATCH 07/11] arm64: dts: qcom: qcs615: Rename AOSS_QMP to power-management   Konrad Dybcio
    • [PATCH 07/11] arm64: dts: qcom: qcs615: Rename AOSS_QMP to power-management   Dmitry Baryshkov
  • [PATCH 08/11] arm64: dts: qcom: sc8180x: Rename AOSS_QMP to power-management   Konrad Dybcio
    • [PATCH 08/11] arm64: dts: qcom: sc8180x: Rename AOSS_QMP to power-management   Dmitry Baryshkov
  • [PATCH 09/11] arm64: dts: qcom: x1e80100-dell-xps13-9345: Drop clock-names from PS8830   Konrad Dybcio
    • [PATCH 09/11] arm64: dts: qcom: x1e80100-dell-xps13-9345: Drop clock-names from PS8830   Dmitry Baryshkov
  • [PATCH 10/11] arm64: dts: qcom: x1e80100-romulus: Drop clock-names from PS8830   Konrad Dybcio
    • [PATCH 10/11] arm64: dts: qcom: x1e80100-romulus: Drop clock-names from PS8830   Dmitry Baryshkov
  • [PATCH 11/11] arm64: dts: qcom: x1e001de-devkit: Drop clock-names from PS8830   Konrad Dybcio
    • [PATCH 11/11] arm64: dts: qcom: x1e001de-devkit: Drop clock-names from PS8830   Dmitry Baryshkov
• [PATCH v3 20/25] drm/tegra: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thierry Reding
• [PATCH -next] drm/msm/dpu: Remove duplicate dpu_hw_cwb.h header   Jiapeng Chong
  • [PATCH -next] drm/msm/dpu: Remove duplicate dpu_hw_cwb.h header   Dmitry Baryshkov
  • [PATCH -next] drm/msm/dpu: Remove duplicate dpu_hw_cwb.h header   Dmitry Baryshkov
  • [PATCH -next] drm/msm/dpu: Remove duplicate dpu_hw_cwb.h header   Dmitry Baryshkov
• [PATCH RFC v3 0/7] drm/display: dp: add new DPCD access functions   Dmitry Baryshkov
  • [PATCH RFC v3 1/7] drm/display: dp: implement new access helpers   Dmitry Baryshkov
    • [PATCH RFC v3 1/7] drm/display: dp: implement new access helpers   Lyude Paul
  • [PATCH RFC v3 2/7] drm/display: dp: change drm_dp_dpcd_read_link_status() return value   Dmitry Baryshkov
    • [PATCH RFC v3 2/7] drm/display: dp: change drm_dp_dpcd_read_link_status() return value   Lyude Paul
  • [PATCH RFC v3 3/7] drm/display: dp: use new DCPD access helpers   Dmitry Baryshkov
  • [PATCH RFC v3 4/7] drm/display: dp-aux-dev: use new DCPD access helpers   Dmitry Baryshkov
    • [PATCH RFC v3 4/7] drm/display: dp-aux-dev: use new DCPD access helpers   Lyude Paul
      • [PATCH RFC v3 4/7] drm/display: dp-aux-dev: use new DCPD access helpers   Dmitry Baryshkov
  • [PATCH RFC v3 5/7] drm/display: dp-cec: use new DCPD access helpers   Dmitry Baryshkov
  • [PATCH RFC v3 6/7] drm/display: dp-mst-topology: use new DCPD access helpers   Dmitry Baryshkov
  • [PATCH RFC v3 7/7] drm/display: dp-tunnel: use new DCPD access helpers   Dmitry Baryshkov
  • [PATCH RFC v3 0/7] drm/display: dp: add new DPCD access functions   Simona Vetter
• [PATCH next] drm/msm/dpu: fix error pointer dereference in msm_kms_init_aspace()   Dmitry Baryshkov
• [PATCH v2 0/4] drm/msm/dpu: follow rules for drm_atomic_helper_check_modeset()   Dmitry Baryshkov
• [PATCH v2 0/5] drm/msm/dpu: enable CDM for all supported platforms   Dmitry Baryshkov
• [PATCH v5 0/8] drm/msm/dpu: rework debugfs interface of dpu_core_perf   Dmitry Baryshkov
• [PATCH v8 0/7] drm/msm: make use of the HDMI connector infrastructure   Dmitry Baryshkov
• [PATCH v2] dt-bindings: display/msm: qcom, sa8775p-mdss: Add missing eDP phy   Dmitry Baryshkov
• [PATCH v6 00/14] drm/msm/dpu: Add Concurrent Writeback Support for DPU 10.x+   Dmitry Baryshkov
• [PATCH v5 0/2] drm/bridge: reuse DRM HDMI Audio helpers for DisplayPort bridges   Dmitry Baryshkov
  • [PATCH v5 1/2] drm/bridge: split HDMI Audio from DRM_BRIDGE_OP_HDMI   Dmitry Baryshkov
    • [PATCH v5 1/2] drm/bridge: split HDMI Audio from DRM_BRIDGE_OP_HDMI   Maxime Ripard
      • [PATCH v5 1/2] drm/bridge: split HDMI Audio from DRM_BRIDGE_OP_HDMI   Dmitry Baryshkov
      • [PATCH v5 1/2] drm/bridge: split HDMI Audio from DRM_BRIDGE_OP_HDMI   Maxime Ripard
      • [PATCH v5 1/2] drm/bridge: split HDMI Audio from DRM_BRIDGE_OP_HDMI   Dmitry Baryshkov
      • [PATCH v5 1/2] drm/bridge: split HDMI Audio from DRM_BRIDGE_OP_HDMI   Maxime Ripard
      • [PATCH v5 1/2] drm/bridge: split HDMI Audio from DRM_BRIDGE_OP_HDMI   Dmitry Baryshkov
  • [PATCH v5 2/2] drm/msm/dp: reuse generic HDMI codec implementation   Dmitry Baryshkov
    • [PATCH v5 2/2] drm/msm/dp: reuse generic HDMI codec implementation   Maxime Ripard
      • [PATCH v5 2/2] drm/msm/dp: reuse generic HDMI codec implementation   Dmitry Baryshkov
      • [PATCH v5 2/2] drm/msm/dp: reuse generic HDMI codec implementation   Maxime Ripard
      • [PATCH v5 2/2] drm/msm/dp: reuse generic HDMI codec implementation   Dmitry Baryshkov
• [PATCH v3 0/8] drm/msm/dpu: improve CTL handling on DPU >= 5.0 platforms   Dmitry Baryshkov
  • [PATCH v3 1/8] drm/msm/dpu: don't overwrite CTL_MERGE_3D_ACTIVE register   Dmitry Baryshkov
  • [PATCH v3 2/8] drm/msm/dpu: program master INTF value   Dmitry Baryshkov
  • [PATCH v3 3/8] drm/msm/dpu: pass master interface to CTL configuration   Dmitry Baryshkov
  • [PATCH v3 4/8] drm/msm/dpu: use single CTL if it is the only CTL returned by RM   Dmitry Baryshkov
  • [PATCH v3 5/8] drm/msm/dpu: don't select single flush for active CTL blocks   Dmitry Baryshkov
  • [PATCH v3 6/8] drm/msm/dpu: allocate single CTL for DPU >= 5.0   Dmitry Baryshkov
  • [PATCH v3 7/8] drm/msm/dpu: remove DPU_CTL_SPLIT_DISPLAY from CTL blocks on DPU >= 5.0   Dmitry Baryshkov
  • [PATCH v3 8/8] drm/msm/dpu: drop now-unused condition for has_legacy_ctls   Dmitry Baryshkov
• [PATCH v3 02/25] drm/dumb-buffers: Provide helper to set pitch and size   Simona Vetter
  • [PATCH v3 02/25] drm/dumb-buffers: Provide helper to set pitch and size   Simona Vetter
• [PATCH next] drm/msm/dpu: Fix uninitialized variable in dpu_crtc_kickoff_clone_mode()   Dan Carpenter
  • [PATCH next] drm/msm/dpu: Fix uninitialized variable in dpu_crtc_kickoff_clone_mode()   Dmitry Baryshkov
  • [PATCH next] drm/msm/dpu: Fix uninitialized variable in dpu_crtc_kickoff_clone_mode()   Dmitry Baryshkov
• [bug report] drm/msm/dpu: Skip trigger flush and start for CWB   Dan Carpenter
• [PATCH] drm/msm/dpu: drop wb2_formats_rgb   Dmitry Baryshkov
• [PATCH 00/10] drm/msm: add support for SAR2130P   Dmitry Baryshkov
  • [PATCH 01/10] dt-bindings: display/msm: dp-controller: describe SAR2130P   Dmitry Baryshkov
    • [PATCH 01/10] dt-bindings: display/msm: dp-controller: describe SAR2130P   Krzysztof Kozlowski
  • [PATCH 02/10] dt-bindings: display/msm: dsi-controller-main: describe SAR2130P   Dmitry Baryshkov
    • [PATCH 02/10] dt-bindings: display/msm: dsi-controller-main: describe SAR2130P   Krzysztof Kozlowski
  • [PATCH 03/10] dt-bindings: display/msm: dsi-phy-7nm: describe SAR2130P   Dmitry Baryshkov
    • [PATCH 03/10] dt-bindings: display/msm: dsi-phy-7nm: describe SAR2130P   Krzysztof Kozlowski
  • [PATCH 04/10] dt-bindings: display/msm: qcom,sc7280-dpu: describe SAR2130P   Dmitry Baryshkov
    • [PATCH 04/10] dt-bindings: display/msm: qcom,sc7280-dpu: describe SAR2130P   Krzysztof Kozlowski
  • [PATCH 05/10] dt-bindings: display/msm: Add Qualcomm SAR2130P   Dmitry Baryshkov
    • [PATCH 05/10] dt-bindings: display/msm: Add Qualcomm SAR2130P   Rob Herring (Arm)
      • [PATCH 05/10] dt-bindings: display/msm: Add Qualcomm SAR2130P   Dmitry Baryshkov
      • [PATCH 05/10] dt-bindings: display/msm: Add Qualcomm SAR2130P   Rob Herring
    • [PATCH 05/10] dt-bindings: display/msm: Add Qualcomm SAR2130P   Krzysztof Kozlowski
  • [PATCH 06/10] drm/msm/mdss: add SAR2130P device configuration   Dmitry Baryshkov
    • [PATCH 06/10] drm/msm/mdss: add SAR2130P device configuration   Dmitry Baryshkov
    • [PATCH 06/10] drm/msm/mdss: add SAR2130P device configuration   kernel test robot
    • [PATCH 06/10] drm/msm/mdss: add SAR2130P device configuration   kernel test robot
  • [PATCH 07/10] drm/msm/dsi/phy: add configuration for SAR2130P   Dmitry Baryshkov
    • [PATCH 07/10] drm/msm/dsi/phy: add configuration for SAR2130P   Konrad Dybcio
      • [PATCH 07/10] drm/msm/dsi/phy: add configuration for SAR2130P   Dmitry Baryshkov
  • [PATCH 08/10] drm/msm/dpu: add catalog entry for SAR2130P   Dmitry Baryshkov
  • [PATCH 09/10] iommu/arm-smmu-qcom: Add SAR2130P MDSS compatible   Dmitry Baryshkov
  • [PATCH 10/10] arm64: dts: qcom: sar2130p: add display nodes   Dmitry Baryshkov
• [PATCH 0/5] drm/msm/dpu: update SmartDMA feature masks   Dmitry Baryshkov
  • [PATCH 1/5] drm/msm/dpu: enable SmartDMA on SM8150   Dmitry Baryshkov
  • [PATCH 2/5] drm/msm/dpu: enable SmartDMA on SC8180X   Dmitry Baryshkov
  • [PATCH 3/5] drm/msm/dpu: enable SmartDMA on SC8280XP   Dmitry Baryshkov
  • [PATCH 4/5] drm/msm/dpu: enable SmartDMA on SM8550   Dmitry Baryshkov
  • [PATCH 5/5] drm/msm/dpu: rename non-SmartDMA feature masks to be more explicit   Dmitry Baryshkov
• [PATCH v3 00/21] drm/msm: Add support for SM8750   Dmitry Baryshkov
• [PATCH v3 4/7] drm/msm/mdp4: use parent_data for LVDS PLL   Konrad Dybcio
• [PATCH 0/4] drm/display: hdmi: provide common code to get Audio Clock Recovery params   Dmitry Baryshkov
  • [PATCH 1/4] drm/display: hdmi: provide central data authority for ACR params   Dmitry Baryshkov
    • [PATCH 1/4] drm/display: hdmi: provide central data authority for ACR params   Maxime Ripard
      • [PATCH 1/4] drm/display: hdmi: provide central data authority for ACR params   Dmitry Baryshkov
      • [PATCH 1/4] drm/display: hdmi: provide central data authority for ACR params   Maxime Ripard
      • [PATCH 1/4] drm/display: hdmi: provide central data authority for ACR params   Dmitry Baryshkov
  • [PATCH 2/4] drm/msm/hdmi: use new helper for ACR tables   Dmitry Baryshkov
    • [PATCH 2/4] drm/msm/hdmi: use new helper for ACR tables   kernel test robot
  • [PATCH 3/4] drm/vc4: use new helper to get ACR values   Dmitry Baryshkov
    • [PATCH 3/4] drm/vc4: use new helper to get ACR values   Maxime Ripard
      • [PATCH 3/4] drm/vc4: use new helper to get ACR values   Dmitry Baryshkov
      • [PATCH 3/4] drm/vc4: use new helper to get ACR values   Maxime Ripard
      • [PATCH 3/4] drm/vc4: use new helper to get ACR values   Dmitry Baryshkov
  • [PATCH 4/4] drm: bridge: dw-hdmi: use new helper to get ACR values   Dmitry Baryshkov
    • [PATCH 4/4] drm: bridge: dw-hdmi: use new helper to get ACR values   kernel test robot
• [PATCH] drm/msm/dpu: reorder pointer operations after sanity checks to avoid NULL deref   Dmitry Baryshkov
  • [PATCH] drm/msm/dpu: reorder pointer operations after sanity checks to avoid NULL deref   Qasim Ijaz
• [PATCH v2] drm/msm/dpu: reorder pointer operations after sanity checks to avoid NULL deref   Dmitry Baryshkov
  • [PATCH v2] drm/msm/dpu: reorder pointer operations after sanity checks to avoid NULL deref   Qasim Ijaz
• [pull] drm/msm: drm-msm-next-2025-03-09 for v6.15   Rob Clark
• [bug report] drm/msm/a6xx: Introduce GMU wrapper support   Dan Carpenter
• [PATCH v1 0/2] drm/msm/dp: Introduce link training per-segment for LTTPRs   Aleksandrs Vinarskis
  • [PATCH v1 1/2] drm/msm/dp: Fix support of LTTPR handling   Aleksandrs Vinarskis
  • [PATCH v1 2/2] drm/msm/dp: Introduce link training per-segment for LTTPRs   Aleksandrs Vinarskis
• [PATCH v2 0/6] Support for Adreno 623 GPU   Akhil P Oommen
• [PATCH v1 1/2] drm/msm/dp: Fix support of LTTPR handling   Abel Vesa
• [PATCH v1 2/2] drm/msm/dp: Introduce link training per-segment for LTTPRs   Abel Vesa
  • [PATCH v1 2/2] drm/msm/dp: Introduce link training per-segment for LTTPRs   Johan Hovold
• [PATCH v2 00/10] Add DSI display support for SA8775P target   Ayushi Makhija
  • [PATCH v2 01/10] dt-bindings: display: msm-dsi-phy-7nm: document the SA8775P DSI PHY   Ayushi Makhija
    • [PATCH v2 01/10] dt-bindings: display: msm-dsi-phy-7nm: document the SA8775P DSI PHY   Krzysztof Kozlowski
  • [PATCH v2 02/10] dt-bindings: msm: dsi-controller-main: document the SA8775P DSI CTRL   Ayushi Makhija
    • [PATCH v2 02/10] dt-bindings: msm: dsi-controller-main: document the SA8775P DSI CTRL   Krzysztof Kozlowski
  • [PATCH v2 07/10] arm64: dts: qcom: sa8775p-ride: add anx7625 DSI to DP bridge nodes   Ayushi Makhija
    • [PATCH v2 07/10] arm64: dts: qcom: sa8775p-ride: add anx7625 DSI to DP bridge nodes   Krzysztof Kozlowski
  • [PATCH v2 08/10] drm/bridge: anx7625: enable HPD interrupts   Ayushi Makhija
    • [PATCH v2 08/10] drm/bridge: anx7625: enable HPD interrupts   Dmitry Baryshkov
  • [PATCH v2 09/10] drm/bridge: anx7625: update bridge_ops and sink detect logic   Ayushi Makhija
    • [PATCH v2 09/10] drm/bridge: anx7625: update bridge_ops and sink detect logic   Dmitry Baryshkov
      • [PATCH v2 09/10] drm/bridge: anx7625: update bridge_ops and sink detect logic   Ayushi Makhija
      • [PATCH v2 09/10] drm/bridge: anx7625: update bridge_ops and sink detect logic   Dmitry Baryshkov
  • [PATCH v2 10/10] drm/bridge: anx7625: change the gpiod_set_value API   Ayushi Makhija
• [PATCH v2 03/10] dt-bindings: display: msm: document DSI controller and phy on SA8775P   Ayushi Makhija
  • [PATCH v2 03/10] dt-bindings: display: msm: document DSI controller and phy on SA8775P   Dmitry Baryshkov
  • [PATCH v2 03/10] dt-bindings: display: msm: document DSI controller and phy on SA8775P   Krzysztof Kozlowski
• [PATCH v2 04/10] drm/msm/dsi: add DSI PHY configuration on SA8775P   Ayushi Makhija
  • [PATCH v2 04/10] drm/msm/dsi: add DSI PHY configuration on SA8775P   Dmitry Baryshkov
• [PATCH v2 05/10] drm/msm/dsi: add DSI support for SA8775P   Ayushi Makhija
  • [PATCH v2 05/10] drm/msm/dsi: add DSI support for SA8775P   Dmitry Baryshkov
• [PATCH v2 06/10] arm64: dts: qcom: sa8775p: add Display Serial Interface device nodes   Ayushi Makhija
  • [PATCH v2 06/10] arm64: dts: qcom: sa8775p: add Display Serial Interface device nodes   Dmitry Baryshkov
• [PATCH v3 18/21] drm/msm/dpu: Implement 10-bit color alpha for v12.0 DPU   Krzysztof Kozlowski
• [PATCH v3 19/21] drm/msm/dpu: Implement CTL_PIPE_ACTIVE for v12.0 DPU   Krzysztof Kozlowski
• [PATCH v4 00/25] drm/dumb-buffers: Fix and improve buffer-size calculation   Thomas Zimmermann
  • [PATCH v4 01/25] drm/dumb-buffers: Sanitize output on errors   Thomas Zimmermann
  • [PATCH v4 02/25] drm/dumb-buffers: Provide helper to set pitch and size   Thomas Zimmermann
  • [PATCH v4 03/25] drm/gem-dma: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 04/25] drm/gem-shmem: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 05/25] drm/gem-vram: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 06/25] drm/armada: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 07/25] drm/exynos: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 08/25] drm/gma500: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 09/25] drm/hibmc: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 10/25] drm/imx/ipuv3: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 11/25] drm/loongson: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 12/25] drm/mediatek: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 13/25] drm/msm: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 14/25] drm/nouveau: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 15/25] drm/omapdrm: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 16/25] drm/qxl: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 17/25] drm/renesas/rcar-du: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 18/25] drm/renesas/rz-du: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 19/25] drm/rockchip: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 20/25] drm/tegra: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 21/25] drm/virtio: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 22/25] drm/vmwgfx: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 23/25] drm/xe: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 24/25] drm/xen: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
  • [PATCH v4 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()   Thomas Zimmermann
• [PATCH v4 00/19] drm/msm: Add support for SM8750   Krzysztof Kozlowski
  • [PATCH v4 03/19] dt-bindings: display/msm: dp-controller: Add SM8750   Krzysztof Kozlowski
  • [PATCH v4 04/19] dt-bindings: display/msm: qcom,sm8650-dpu: Add SM8750   Krzysztof Kozlowski
  • [PATCH v4 05/19] dt-bindings: display/msm: qcom,sm8750-mdss: Add SM8750   Krzysztof Kozlowski
  • [PATCH v4 06/19] drm/msm/dpu: Add missing "fetch" name to set_active_pipes()   Krzysztof Kozlowski
  • [PATCH v4 07/19] drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on mixer reset   Krzysztof Kozlowski
  • [PATCH v4 08/19] drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on ctl_path reset   Krzysztof Kozlowski
  • [PATCH v4 09/19] drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE before blend setup   Krzysztof Kozlowski
  • [PATCH v4 10/19] drm/msm/dpu: Drop useless comments   Krzysztof Kozlowski
  • [PATCH v4 11/19] drm/msm/dpu: Add LM_7, DSC_[67], PP_[67] and MERGE_3D_5   Krzysztof Kozlowski
  • [PATCH v4 12/19] drm/msm/dpu: Add handling of LM_6 and LM_7 bits in pending flush mask   Krzysztof Kozlowski
  • [PATCH v4 13/19] drm/msm/dsi/phy: Add support for SM8750   Krzysztof Kozlowski
  • [PATCH v4 14/19] drm/msm/dsi: Add support for SM8750   Krzysztof Kozlowski
  • [PATCH v4 15/19] drm/msm/dpu: Add support for SM8750   Krzysztof Kozlowski
  • [PATCH v4 16/19] drm/msm/dpu: Implement 10-bit color alpha for v12.0 DPU   Krzysztof Kozlowski
  • [PATCH v4 17/19] drm/msm/dpu: Implement CTL_PIPE_ACTIVE for v12.0 DPU   Krzysztof Kozlowski
  • [PATCH v4 18/19] drm/msm/dpu: Implement LM crossbar for v12.0 DPU   Krzysztof Kozlowski
  • [PATCH v4 19/19] drm/msm/mdss: Add support for SM8750   Krzysztof Kozlowski
• [PATCH v4 01/19] dt-bindings: display/msm: dsi-phy-7nm: Add SM8750   Krzysztof Kozlowski
• [PATCH v4 02/19] dt-bindings: display/msm: dsi-controller-main: Add SM8750   Krzysztof Kozlowski
• [PATCH v2 0/2] drm/msm/dp: Introduce link training per-segment for LTTPRs   Aleksandrs Vinarskis
  • [PATCH v2 1/2] drm/msm/dp: Fix support of LTTPR handling   Aleksandrs Vinarskis
  • [PATCH v2 2/2] drm/msm/dp: Introduce link training per-segment for LTTPRs   Aleksandrs Vinarskis
  • [PATCH v2 0/2] drm/msm/dp: Introduce link training per-segment for LTTPRs   Stefan Schmidt

Last message date: Wed Mar 12 21:16:48 UTC 2025
Archived on: Wed Mar 12 21:17:01 UTC 2025

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...